₦airaland Forum

oluayebenz:
Yes your brain box is gone

Get a replacement and see the magic

Starboytwo:
pls sir, so you have an idea how much a brain box for Honda eod cost?

The ba3 charger said it should not be too expensive.. So I went online and saw 45-50k..
However, rewire said 140k

Ah no get any 140 Kan Kan.

ModJ1:
Please house help me, My newly bought tokumbo Mercedes ML 350 Model 2009 has battery drain issues once parked overnight or some hours the battery drains.......

and there's a ticking noise from the hood when I park and lock it......

I also noticed that ignition lights on the dashboard lights up on its own when the key is not on ignition and locked.....



It also vibrates a bit on acceleration....I don't know what could be causing all these issues with it please 🙏🏾

Starboytwo:
pls sir, so you have an idea how much a brain box for Honda eod cost?

The ba3 charger said it should not be too expensive.. So I went online and saw 45-50k..
However, rewire said 140k

Ah no get any 140 Kan Kan.

Louiscars:
First thing is you’ll need competent hands to do a parasitic drain on the car to tell what is causing the drain
Secondly can you share vin info of the said vehicle , like I hope it wasn’t flooded
As for the vibration a lot of things could cause that probably a worn cv axle physical inspection needed for this

Louiscars:
First thing is you’ll need competent hands to do a parasitic drain on the car to tell what is causing the drain
Secondly can you share vin info of the said vehicle , like I hope it wasn’t flooded
As for the vibration a lot of things could cause that probably a worn cv axle physical inspection needed for this

kingreign:
I doubt he'd come and check. You'd actually be the one to go to warri and let him diagnose the car.

flex12:
Dear guys,

I need help with my Honda Accord EOD, I drove past a flooded area two days ago.

The car started jerking not up to 20 mins after I left the area and it's still happening now.

I need an advise on how to resolve this because the car now jerks continuously anytime I try to accelerate.

Thank you.

CHIGIM:
Please is it possible for ford edge 2.0l ecoboost engine vacuum pump cause lost of engine oil?

Zendizel:
Mechanic changed my toyota corolla 2005 crankshaft and since then the engine sounds like that of a grinding machine. I asked him why the sudden change in sound and his replay was that the engine needs to run before the sound will stop and this is the 3rd week now, still thesame sound. Any solution?

Zendizel:
Mechanic changed my toyota corolla 2005 crankshaft and since then the engine sounds like that of a grinding machine. I asked him why the sudden change in sound and his replay was that the engine needs to run before the sound will stop and this is the 3rd week now, still thesame sound. Any solution?

Zendizel:
Mechanic changed my toyota corolla 2005 crankshaft and since then the engine sounds like that of a grinding machine. I asked him why the sudden change in sound and his replay was that the engine needs to run before the sound will stop and this is the 3rd week now, still thesame sound. Any solution?

Zendizel:
Mechanic changed my toyota corolla 2005 crankshaft and since then the engine sounds like that of a grinding machine. I asked him why the sudden change in sound and his replay was that the engine needs to run before the sound will stop and this is the 3rd week now, still thesame sound. Any solution?

kingreign:
Which kind of vacuum pump?
Or do you mean the turbo?

Abbeyismo:
Where's ur location

Ewroghene1:
ajah

bacco2000:
Greetings to all the great engineers in the house, I have a toyota matrix 2005 with P0012 code(timing over retarded intake cam) I have serviced the vvti solenoid but the code came back. Engine has been opened by previous user. I experience hard starting once the engine is cold also poor mpg.

I need a competent mechanic to help me open the engine to check if the timing is right before looking out for other things.

Or what is the best way to tackle this issue.

KingAzubuike:
Hi guys.. not too long ago, My friend was involved in a nasty accident that damaged the front badly. He has been fixing it since then and I've been helping put too. I felt the panel beater and mechanic must have sold off some useful part.. please what are those parts you think might have still be useful in an accident but must have been sold off.

Or basically, what are those parts you think I am supposed to ask him for to hand over to me.

PS: They claimed AC system was totally destroyed too. I'll appreciate if you can list all I'm supposed to retrieve.

I don't mind sending like 5k to anyone that can help me list them

Picture 1 is a picture of the accident.

Picture 2 shows the repair.

AutoJando:
Aside from wrong/improper timing, it could also be that the camshaft phasor has been welded permanently with the camshaft. It could even be due to dirty oil or blocked oil fees orifice in the valvetrain, who knows. It will definitely need physical assessment.


Is there grinding noise at the top of the engine?





#AutoJando

AutoJando:

For starters, it should be on the record that your panel beater did a terrific job realigning the front fascia of that car. It is left for painter to perfect the job.

Coming back to missing parts, you can't just assume that things are missing without knowing what was there.
The AC system, yes. Starting from the condenser/drier assembly, the radiator is definitely shot, the cooling fan + shroud + expansion tank/reservoir. These things will definitely need replacing.
In addition, depending on the depth of the impact, you may even need to replace some deformed/broken engine seats.


#AutoJando

KingAzubuike:
Terrific job realigning the front fascia.. it can mean two things..

Like he did a bad job right?

AutoJando:
Grinding Noise, Corolla 1zz engine palava.

Questions
1. Since the grinding noise is new to you, what was the original reason for replacing the crankshaft?

2. While he was replacing the crankshaft, did he open the top cylinder. Meaning did he separate the top cylinder from the engine block? If you are not tech savvy, the easiest way to know is to try to remember whether he mentioned anything that has to do with "gasket".

Answering these questions correctly is very essential in the quality and effectiveness of the remote assistance you will receive from the many experts on this platform.


#AutoJando