₦airaland Forum

Welcome, Guest: RegisterLoginWith GoogleTrendingRecentNew

Stats: 3,326,985 members, 8,428,912 topics. Date: Thursday, 18 June 2026 at 08:04 AM

Toggle theme

Tell Us Your Car Faults. Let's Assess And Fix Them - Car Talk (190) - Nairaland

Nairaland ForumNairaland GeneralCar TalkTell Us Your Car Faults. Let's Assess And Fix Them (238000 Views)

1 2 3 ... 187 188 189 190 191 192 193 ... 205 Reply (Go Down)

Re: Tell Us Your Car Faults. Let's Assess And Fix Them by vivalavida(m): 11:03am On Dec 04, 2025
freemanbubble:
Please is it advisable to take off the thermostat of my Lexus es 350

Most mechanic are saying it is advisable here in Africa
change mechanic
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by RyanAutomotive: 12:47pm On Dec 04, 2025
segsdynamic:
Good morning House,

My Toyota Corolla 2006 is showing engine light ON for a while now... A friend of mine assisted me to scan it and below error codes are displaying:
P043E
‎P043F
‎P2401
‎P2402
‎P2419

All codes related to EVAP system, leak detection system, EVAP switching valve, Faulty EVAP canister.

Pls what is the solution to these.... I have asked my mechanic and he pointed that I should not bother about the canister and this is a mere fault. Pls advise.
.

Good afternoon boss, let’s break your codes down properly.
All five codes — P043E, P043F, P2401, P2402, P2419 — point to one structured problem, and it’s not the “mere fault” your mechanic mentioned. This is a clear EVAP-system failure on the Corolla.



🔍 TECHNICAL BREAKDOWN (DIAGNOSTIC INSIGHT)

1. WHAT THESE FIVE CODES MEAN TOGETHER

When these exact codes appear at once, it means the EVAP system is no longer sealing, venting, or monitoring pressure correctly.

Specifically:
• P043E & P043F → Vent valve stuck / Switching valve incorrect flow
• P2401 & P2402 → Leak Detection Pump (LDP) weak, open, or shorted
• P2419 → EVAP switching valve circuit malfunction

All pointing to the canister area at the rear of your Corolla.



2. LIKELY ROOT CAUSES (BASED ON YOUR CODES)

A. Faulty EVAP Canister Vent Valve

Most common failure on Corolla 2005–2010.

B. Failed Leak Detection Pump (LDP)

Your P2401 + P2402 confirm it’s either shorted or not building pressure.

C. Clogged/Saturated Charcoal Canister

Dust or moisture blocks the vent and triggers switching-valve errors.

D. Cracked/Loose EVAP Hoses

Heat + age causes micro cracks around the fuel tank.

E. Electrical issue in the EVAP harness

Less common but possible.



3. WHY THE ENGINE LIGHT WON’T GO OFF

The Corolla ECU performs EVAP self-tests during driving.
If the system cannot:
• Seal,
• Vent, or
• Hold pressure,

The ECU instantly re-triggers the light.
That’s why clearing the code won’t solve anything until the real cause is fixed.



⚙️ RYAN AUTOMOTIVE WORKSHOP PROFESSIONAL TAKE

We’ve handled this exact EVAP code combination several times on Corolla 2006–2010.
The usual scenarios we see:
• Mechanic ignores it → Codes return
• Fuel smell begins
• Fuel economy drops
• Check-engine light becomes permanent
• Driver gets used to the light, but the system remains faulty

At our workshop, we run a proper EVAP diagnostic, including:
1. EVAP smoke test
2. Vent valve 12V activation test
3. Leak Detection Pump output/electrical test
4. Hose integrity/pressure test
5. Switching-valve circuit inspection

These steps pinpoint the exact fault so only the failed part is replaced — no guesswork, no wasting money on canister replacement that doesn’t solve anything.

If you’re around Lagos and want the issue handled cleanly and professionally, you can reach out to us directly — we’ll run the accurate tests and resolve the fault permanently.



📌 PROFESSIONAL SUMMARY

Your EVAP fault is real, not harmless.
The correct procedure is:

Smoke test → Electrical diagnosis → Replace the exact faulty valve/pump → Clear codes.

After this, your check-engine light will go off and stay off.



Ryan Automotive Limited
Precision. Transparency. Excellence.
Professional Auto Diagnostics • Engine & Transmission Experts • Genuine Parts & Cooling Division
Lagos, Nigeria
Contact via profile/signature
Ryan Automotive Workshop Division
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by RyanAutomotive: 12:49pm On Dec 04, 2025
freemanbubble:
Please is it advisable to take off the thermostat of my Lexus es 350

Most mechanic are saying it is advisable here in Africa
Good day boss, let’s break this down properly because thermostat removal is one of the biggest mistakes we see on Lexus ES350 engines in Nigeria.



🔍 TECHNICAL BREAKDOWN (DIAGNOSTIC INSIGHT)

1. SHOULD YOU REMOVE YOUR THERMOSTAT? — CLEAR ANSWER: NO.

Removing the thermostat on an ES350 does not “help African weather.”
It actually damages the engine slowly, and most mechanics don’t understand how the ES350 cooling system is designed.

Here’s what happens when you remove it:

A. Engine runs below optimal temperature

The ES350 ECU is programmed to run at 80–90°C.
Without the thermostat:
• Engine stays too cold
• Fuel mixture becomes richer
• Fuel consumption increases
• Carbon builds up in the intake valves
• Catalytic converter gets stressed

B. Cooling system loses pressure stability

The thermostat helps regulate coolant flow.
Removing it causes:
• Poor coolant circulation
• Air pockets
• Temperature fluctuation
• Higher risk of overheating in traffic

C. Gearbox performance suffers

The ES350 transmission relies on engine temperature.
Cold engine = sluggish gear shifts & delay when hot.

D. Overheating becomes more likely

Ironically, many people remove thermostats thinking it prevents overheating.
But on the ES350:
• The coolant flows too fast
• It doesn’t stay long enough to absorb heat
• Fans run longer
• Engine overheats under load or AC

So thermostat removal does more harm than good.



⚙️ RYAN AUTOMOTIVE WORKSHOP PROFESSIONAL TAKE

We’ve repaired many ES350 engines where the owner removed the thermostat because “mechanic said it’s better in Africa.”

The results we usually see:
• Rough idle
• High fuel consumption
• AC load dragging the engine
• Random overheating after months
• Dirty engine oil
• Catalytic converter failure
• Transmission jerks when cold

Every single time, once we reinstall a proper thermostat and bleed the system correctly, the engine stabilizes.

The ES350 cooling system is built for hot climates.
Toyota/Lexus ships the same thermostat to:
Nigeria, UAE, Qatar, Saudi Arabia, Kuwait — all hotter than Nigeria.

So “African heat” is not an excuse.

If your car is overheating, the thermostat is rarely the cause.
The real issues are usually:
• Weak water pump
• Blocked radiator
• Wrong coolant
• Fan relay problem
• Air trapped in the system
• Head-gasket pressure leak

Removing thermostat hides the problem and creates new ones.

If you want the car checked properly in Lagos, you can reach out to Ryan Automotive Limited — we run clean diagnostic tests and fix overheating the right way.



📌 PROFESSIONAL SUMMARY

No, don’t remove your thermostat.
It will increase fuel consumption, affect engine health, stress your transmission, and can even cause overheating.

Fix the real cause instead of bypassing a critical cooling component.



Ryan Automotive Limited
Precision. Transparency. Excellence.
Professional Auto Diagnostics • Engine & Transmission Experts • Genuine Parts & Cooling Division
Lagos, Nigeria
Contact via profile/signature
Ryan Automotive Workshop Division
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by kingreign(op): 12:57pm On Dec 04, 2025
freemanbubble:
Please is it advisable to take off the thermostat of my Lexus es 350

Most mechanic are saying it is advisable here in Africa
Don't do that pls. Avoid those clowns.
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by kingreign(op): 12:58pm On Dec 04, 2025
segsdynamic:
Good morning House,

My Toyota Corolla 2006 is showing engine light ON for a while now... A friend of mine assisted me to scan it and below error codes are displaying:
P043E
‎P043F
‎P2401
‎P2402
‎P2419

All codes related to EVAP system, leak detection system, EVAP switching valve, Faulty EVAP canister.

Pls what is the solution to these.... I have asked my mechanic and he pointed that I should not bother about the canister and this is a mere fault. Pls advise.
It not a mere fault. It's an evap fault. Take it to someone else that knows his onions and can tackle evap issues.
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by PhyzieETH:
Good evening everyone,

I drive a 2010 Toyota Corolla and I’ve been experiencing some issues:

While driving, the car will suddenly rev on its own. This also happens occasionally when the car is idle.

While parked the rpm goes close to 2, thou this rarely occurs.

After driving for about 30 minutes or more, when I stop and shift the gear to Park, the RPM drops below 1, the engine vibrates, and then gradually returns to normal.

While driving especially when climbing a hill the car makes a noise as if it’s struggling to climb. After a few seconds, it becomes stable again.

Things I have done so far:
A. Changed the fuel pump
B. Bought new plugs
C. Serviced the nozzles
D. Changed the injector mouth

When I first changed the fuel pump and plugs, the hill-climbing issue stopped, but after 3–4 days it returned. All the other problems are still present
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by kingreign(op): 9:16pm On Dec 04, 2025
PhyzieETH:
Good evening everyone,

I drive a 2010 Toyota Corolla and I’ve been experiencing some issues:

While driving, the car will suddenly rev on its own. This also happens occasionally when the car is idle.

While parked the rpm goes close to 2, thou this rarely occurs.

After driving for about 30 minutes or more, when I stop and shift the gear to Park, the RPM drops below 1, the engine vibrates, and then gradually returns to normal.

While driving especially when climbing a hill the car makes a noise as if it’s struggling to climb. After a few seconds, it becomes stable again.

Things I have done so far:
A. Changed the fuel pump
B. Bought new plugs
C. Serviced the nozzles
D. Changed the injector mouth

When I first changed the fuel pump and plugs, the hill-climbing issue stopped, but after 3–4 days it returned. All the other problems are still present
07034581213
DM
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by AmazingG007: 11:34am On Dec 05, 2025
Hi everybody…pls I drive 2013 Camry 2 days ago while traveling after driving in some bad road my tire light indicator started flashing then it stopped and remain showed on the dashboard at first I thought one of my tire air pressure is low but I checked and I see non of it is low but the light remain on the dashboard again I checked my car tire pressure from the dashboard it normally show the pressure before but it doesn’t show it anymore how can I fix this…thank
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by Louiscars: 1:26pm On Dec 05, 2025
AmazingG007:
Hi everybody…pls I drive 2013 Camry 2 days ago while traveling after driving in some bad road my tire light indicator started flashing then it stopped and remain showed on the dashboard at first I thought one of my tire air pressure is low but I checked and I see non of it is low but the light remain on the dashboard again I checked my car tire pressure from the dashboard it normally show the pressure before but it doesn’t show it anymore how can I fix this…thank
One or more of the TPMS sensors has an issue, kindly give it to a technician who has a TPMs scan tool to successfully get rid of the light
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by senator2k9(m):
PhyzieETH:
Good evening everyone,

I drive a 2010 Toyota Corolla and I’ve been experiencing some issues:

While driving, the car will suddenly rev on its own. This also happens occasionally when the car is idle.

While parked the rpm goes close to 2, thou this rarely occurs.

After driving for about 30 minutes or more, when I stop and shift the gear to Park, the RPM drops below 1, the engine vibrates, and then gradually returns to normal.

While driving especially when climbing a hill the car makes a noise as if it’s struggling to climb. After a few seconds, it becomes stable again.

Things I have done so far:
A. Changed the fuel pump
B. Bought new plugs
C. Serviced the nozzles
D. Changed the injector mouth

When I first changed the fuel pump and plugs, the hill-climbing issue stopped, but after 3–4 days it returned. All the other problems are still present
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by senator2k9(m): 6:01am On Dec 06, 2025
AmazingG007:
Hi everybody…pls I drive 2013 Camry 2 days ago while traveling after driving in some bad road my tire light indicator started flashing then it stopped and remain showed on the dashboard at first I thought one of my tire air pressure is low but I checked and I see non of it is low but the light remain on the dashboard again I checked my car tire pressure from the dashboard it normally show the pressure before but it doesn’t show it anymore how can I fix this…thank
Check the spare Tyre too. The tyre pressure sensor also works with the spare tyre
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by senator2k9(m): 6:03am On Dec 06, 2025
PhyzieETH:
Good evening everyone,

I drive a 2010 Toyota Corolla and I’ve been experiencing some issues:

While driving, the car will suddenly rev on its own. This also happens occasionally when the car is idle.

While parked the rpm goes close to 2, thou this rarely occurs.

After driving for about 30 minutes or more, when I stop and shift the gear to Park, the RPM drops below 1, the engine vibrates, and then gradually returns to normal.

While driving especially when climbing a hill the car makes a noise as if it’s struggling to climb. After a few seconds, it becomes stable again.

Things I have done so far:
A. Changed the fuel pump
B. Bought new plugs
C. Serviced the nozzles
D. Changed the injector mouth

When I first changed the fuel pump and plugs, the hill-climbing issue stopped, but after 3–4 days it returned. All the other problems are still present
Clean the throttle body and MAF SENSOR. Scan the car comprehensive again
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by senator2k9(m): 6:04am On Dec 06, 2025
vivalavida:
change mechanic
Exactly...the first thing to do is to change mechanic
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by ticker(m): 6:55pm On Dec 08, 2025
The interior of my car gets unnecessary hot when I start the engine in the day time or when I drive small distance in the morning. Pls what could cause this?
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by kingreign(op): 7:09pm On Dec 08, 2025
ticker:
The interior of my car gets unnecessary hot when I start the engine in the day time or when I drive small distance in the morning. Pls what could cause this?
Which car is this and was any recent repairs carried out on the exhaust or under the dashboard?

When did this issue started?
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by ticker(m): 8:28pm On Dec 08, 2025
It's an EOD. We have never done any work on the exhaust, it started recently
kingreign:
Which car is this and was any recent repairs carried out on the exhaust or under the dashboard?

When did this issue started?
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by kingreign(op): 8:30pm On Dec 08, 2025
ticker:
It's an EOD. We have never done any work on the exhaust, it started recently
location, if you're in Abuja, feel free to DM me. I may have a solution for this
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by martins946: 10:51am On Dec 09, 2025
Pls my brothers, my Honda Civic 2003 is struggling to move when slowed down or stopped. Meanwhile, the D light is blinking and after I scanned it, it is showing P0753 (shift solenoid A circuit electrical. Pls any advice or way-out. Waiting for your kind response. Thanks
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by Somdivaa: 4:15pm On Dec 09, 2025
My Corolla 03 stalls once engage on drive or reverse in trying to find solutions now the car won't start was told the brain box has been damaged in the process.. another brain box was used to check it yet car still won't start.

When scanned reads communication error
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by RyanAutomotive: 6:28pm On Dec 09, 2025
Somdivaa:
My Corolla 03 stalls once engage on drive or reverse in trying to find solutions now the car won't start was told the brain box has been damaged in the process.. another brain box was used to check it yet car still won't start.

When scanned reads communication error
Good evening sir,

Thank you for clearly explaining your situation on the Toyota Corolla 2003.

From a professional diagnostic standpoint, this is not random engine failure — this is a communication and power supply fault between the ECU (brain box) and the vehicle’s main control system.



🔧 Technical Breakdown

1. Original Stalling When Engaging Drive/Reverse
The stalling when shifting into D or R usually happens due to:
• Failed idle air control (IAC) system
• Faulty throttle body operation
• Torque converter clutch (TCC) sticking
• ECU idle compensation failure

These are control-related faults, not mechanical engine damage.



2. Why It No Longer Starts Now
Since the car was worked on and now refuses to start:
• The ECU is likely not communicating with the system
• Power or ground to the ECU is missing
• Immobilizer mismatch
• Blown ECU fuse or relay

This is why the scanner now shows “communication error.”



3. Important Truth
Changing the brain box blindly will not fix this kind of fault. The problem is often:
• Power supply wiring
• ECU grounds
• Burnt fuse lines
• Corrupted communication lines (CAN / K-line)

Until those are tested, replacing ECU will keep failing.



⚙️ Ryan Automotive Workshop Professional Take

At Ryan Automotive Limited, we’ve handled this exact case multiple times on Corolla, Camry and Yaris models. In most cases, the ECU was not damaged — the real issue was blown ECU power lines, faulty main relay, or immobilizer conflict, and we restored communication without wasting money on brain boxes.



✅ Professional Summary

This is an electrical/communication fault, not a dead engine.
The car needs proper ECU communication testing, not guessing.



If you want this fixed professionally in Lagos, contact:

Ryan Automotive Limited
Precision. Transparency. Excellence.
Professional Auto Diagnostics • Engine & Transmission Experts
Lagos, Nigeria
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by RyanAutomotive: 6:32pm On Dec 09, 2025
martins946:
Pls my brothers, my Honda Civic 2003 is struggling to move when slowed down or stopped. Meanwhile, the D light is blinking and after I scanned it, it is showing P0753 (shift solenoid A circuit electrical. Pls any advice or way-out. Waiting for your kind response. Thanks
Good evening sir,

Thank you for the clear explanation of your 2003 Honda Civic transmission concern and the fault code P0753 (Shift Solenoid ‘A’ Circuit Electrical).

From a professional diagnostic perspective, this fault sits at the borderline between electrical control failure and internal gearbox (automatic transmission) hydraulic fault — and it must be confirmed properly before any major decision.



🔧 Technical Breakdown — Professional Insight

1. What P0753 Really Means
This code does not just mean “bad solenoid”. It means the transmission control module cannot correctly complete the electrical command cycle to the hydraulic system.

This failure can originate from:
• A damaged shift solenoid
• Burnt or shorted solenoid wiring
• A failing transmission control driver inside the ECU
• Or internal hydraulic pressure leakage inside the gearbox



2. When It’s NOT Just Electrical — Gearbox Side Possibility

If computerized diagnostics and live pressure testing show:
• Correct electrical commands leaving the ECU ✅
• Good solenoid resistance ✅
• Good wiring continuity ✅

…but the gearbox still fails to respond, then the fault becomes internal gearbox-side, such as:
• Worn clutch packs
• Valve body hydraulic leakage
• Stuck shift valves
• Internal pressure loss inside the gearbox

At this stage, it becomes a gearbox (transmission) mechanical-hydraulic fault, not just a sensor problem.



3. Professional Diagnostic

A correct workshop will:
• Perform advanced scan tool testing
• Run live solenoid actuation tests
• Measure line pressure inside the gearbox
• Compare commanded vs actual gear change response

Only after these steps can a technician confirm whether the fault is:
✅ Electrical-side
or
✅ Gearbox internal failure



⚙️ Ryan Automotive Workshop Professional Take

At Ryan Automotive Limited, we handle this level of diagnosis routinely. We have repaired cases where P0753 turned out to be:
• Simple solenoid faults ✅
• ECU control driver failures ✅
• AND cases where the gearbox internal valve body had failed ✅

Because of this, we do not guess — we confirm with live diagnostics before recommending gearbox repair or replacement.



✅ Professional Summary

This fault cannot be judged by code alone.
P0753 can be either an electrical control failure or a mechanical gearbox hydraulic failure.
Only a structured computerized diagnostic process can determine the true root cause.



If you require professional-level diagnostics, fault isolation, or transmission repair consultation, you can reach out to:

Ryan Automotive Limited
Precision. Transparency. Excellence.
Transmission Diagnostics • ECU Communication Repair • Gearbox Specialists
Lagos, Nigeria
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by Olusanya827: 8:57am On Dec 10, 2025
My car radiator is shorting water after changing head gasket and water pump..help
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by kingreign(op): 12:48pm On Dec 10, 2025
Olusanya827:
My car radiator is shorting water after changing head gasket and water pump..help
Have another competent mechanic thru go the whole process again.
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by Abbeyismo(m): 3:20pm On Dec 10, 2025
Olusanya827:
My car radiator is shorting water after changing head gasket and water pump..help
Did you resurface the top cylinder before returning it back?
Check the heater core for leaks
Check for leaks too
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by AmazingG007: 11:09pm On Dec 10, 2025
Please I really need help…car is 2013 Camry..at first few days ago it was my tire pressure light that showed and remained on the dashboard with non of my tire pressure is low but tonight as I was driving my ABS light, slipping/traction control light and parking brake light all showed and remained on the dashboard i off the engine for awhile and restarted it again but the light still remained on the dashboard now its tire pressure light, ABS light, slipping/traction control light and parking brake light all on the dashboard I’ve never experienced anything like this before please what could be the cause and what’s the proper was to solve it…thanks
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by Abbeyismo(m): 9:26am On Dec 11, 2025
AmazingG007:
Please I really need help…car is 2013 Camry..at first few days ago it was my tire pressure light that showed and remained on the dashboard with non of my tire pressure is low but tonight as I was driving my ABS light, slipping/traction control light and parking brake light all showed and remained on the dashboard i off the engine for awhile and restarted it again but the light still remained on the dashboard now its tire pressure light, ABS light, slipping/traction control light and parking brake light all on the dashboard I’ve never experienced anything like this before please what could be the cause and what’s the proper was to solve it…thanks
Take ur car for scanning
Scan ABS
Scan tpms too to know what wrong with any of the sensor
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by RyanAutomotive: 11:22am On Dec 11, 2025
AmazingG007:
Please I really need help…car is 2013 Camry..at first few days ago it was my tire pressure light that showed and remained on the dashboard with non of my tire pressure is low but tonight as I was driving my ABS light, slipping/traction control light and parking brake light all showed and remained on the dashboard i off the engine for awhile and restarted it again but the light still remained on the dashboard now its tire pressure light, ABS light, slipping/traction control light and parking brake light all on the dashboard I’ve never experienced anything like this before please what could be the cause and what’s the proper was to solve it…thanks
Good morning sir,

Thank you for reaching out regarding your 2013 Toyota Camry. Based on your description, having the Tire Pressure, ABS, Traction/Slip, and Parking Brake lights all illuminated at the same time points to a linked system fault, not random or isolated issues.



🔧 Professional Diagnostic Insight

1️⃣ Primary Cause — ABS / Wheel Speed System

On Camry models, the ABS, Traction Control, Parking Brake, and TPMS lights are interconnected. If the ABS system cannot read wheel speed properly, it automatically disables ABS and traction control, triggering all related dashboard warnings.

Common causes:
• Faulty wheel speed sensor(s)
• Damaged wiring or connectors to ABS sensors
• Worn/damaged wheel hub bearing
• Low brake fluid or faulty brake fluid level sensor
• ABS module internal fault



2️⃣ Why the TPMS Light Also Came On

Even with correct tire pressures, the TPMS light may illuminate because:
• There is a general electrical/system fault
• The ABS module loses communication with the ECU
• The car activates fail-safe mode

This is expected in such ABS-related faults.



3️⃣ Correct Repair Approach

This should not be treated as guesswork. The proper steps are:
1. Full OBD2 + ABS Scan – Identifies the exact wheel or component causing the fault. Codes often seen: C0210, C0205, C1234, C1201.
2. Inspect Wheel Speed Sensors & Wiring – Look for broken wires, dirty sensor tips, loose connectors, or damaged rotor rings.
3. Repair / Replace Faulty Component – Replace sensor or hub bearing if needed, top up brake fluid, repair wiring, or replace ABS module only if confirmed faulty.

Clearing codes before repair or random replacement often results in the lights returning.



⚙️ Ryan Automotive Workshop Professional Take

We have resolved this exact scenario multiple times on Camry and Corolla models between 2012–2015.
• 95% of the time, the problem is a faulty wheel speed sensor or damaged hub bearing.
• Proper scanning and targeted repair resolves all linked warning lights reliably.

We strongly advise against guessing parts — Toyota’s systems are linked, and guessing can lead to repeated costs.



🧩 Summary & Next Steps

Your Camry is in ABS/Traction fail-safe mode due to a wheel-speed/ABS system fault.

✅ Correct action: Scan first → Identify faulty part → Repair → Clear codes

For precise diagnosis and repair, we invite you to bring your Camry to Ryan Automotive Limited. Our team will:
• Run a full ABS + ECU diagnostic scan
• Provide a detailed fault report
• Recommend exact repairs and cost
• Fix the problem professionally, ensuring all dashboard lights go off



Ryan Automotive Limited
Precision. Transparency. Excellence.
Professional Auto Diagnostics • Engine & Transmission Experts • Genuine Parts & Cooling Division
Lagos, Nigeria
Contact via profile/signature
Ryan Automotive Workshop Division
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by AmazingG007: 2:17pm On Dec 11, 2025
RyanAutomotive:
Good morning sir,

Thank you for reaching out regarding your 2013 Toyota Camry. Based on your description, having the Tire Pressure, ABS, Traction/Slip, and Parking Brake lights all illuminated at the same time points to a linked system fault, not random or isolated issues.



🔧 Professional Diagnostic Insight

1️⃣ Primary Cause — ABS / Wheel Speed System

On Camry models, the ABS, Traction Control, Parking Brake, and TPMS lights are interconnected. If the ABS system cannot read wheel speed properly, it automatically disables ABS and traction control, triggering all related dashboard warnings.

Common causes:
• Faulty wheel speed sensor(s)
• Damaged wiring or connectors to ABS sensors
• Worn/damaged wheel hub bearing
• Low brake fluid or faulty brake fluid level sensor
• ABS module internal fault



2️⃣ Why the TPMS Light Also Came On

Even with correct tire pressures, the TPMS light may illuminate because:
• There is a general electrical/system fault
• The ABS module loses communication with the ECU
• The car activates fail-safe mode

This is expected in such ABS-related faults.



3️⃣ Correct Repair Approach

This should not be treated as guesswork. The proper steps are:
1. Full OBD2 + ABS Scan – Identifies the exact wheel or component causing the fault. Codes often seen: C0210, C0205, C1234, C1201.
2. Inspect Wheel Speed Sensors & Wiring – Look for broken wires, dirty sensor tips, loose connectors, or damaged rotor rings.
3. Repair / Replace Faulty Component – Replace sensor or hub bearing if needed, top up brake fluid, repair wiring, or replace ABS module only if confirmed faulty.

Clearing codes before repair or random replacement often results in the lights returning.



⚙️ Ryan Automotive Workshop Professional Take

We have resolved this exact scenario multiple times on Camry and Corolla models between 2012–2015.
• 95% of the time, the problem is a faulty wheel speed sensor or damaged hub bearing.
• Proper scanning and targeted repair resolves all linked warning lights reliably.

We strongly advise against guessing parts — Toyota’s systems are linked, and guessing can lead to repeated costs.



🧩 Summary & Next Steps

Your Camry is in ABS/Traction fail-safe mode due to a wheel-speed/ABS system fault.

✅ Correct action: Scan first → Identify faulty part → Repair → Clear codes

For precise diagnosis and repair, we invite you to bring your Camry to Ryan Automotive Limited. Our team will:
• Run a full ABS + ECU diagnostic scan
• Provide a detailed fault report
• Recommend exact repairs and cost
• Fix the problem professionally, ensuring all dashboard lights go off



Ryan Automotive Limited
Precision. Transparency. Excellence.
Professional Auto Diagnostics • Engine & Transmission Experts • Genuine Parts & Cooling Division
Lagos, Nigeria
Contact via profile/signature
Ryan Automotive Workshop Division
Thank you so much for your reply…when the ABS light and traction control light and parking brake light on I have the extra tire on one leg but immediately I put in the normal tire back the AbS light, traction control and parking break go off but remain the tire pressure light on the dashboard
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by RyanAutomotive: 2:51pm On Dec 11, 2025
AmazingG007:
Thank you so much for your reply…when the ABS light and traction control light and parking brake light on I have the extra tire on one leg but immediately I put in the normal tire back the AbS light, traction control and parking break go off but remain the tire pressure light on the dashboard
Since you mentioned the ABS, Traction and Parking Brake lights went off immediately you replaced the spare tire with the correct-sized tire, that confirms the issue was caused by wheel-speed mismatch from the spare. That part is already resolved.

The only reason the TPMS (tire pressure) light is still on is either low pressure on one of the four tires or the TPMS sensor on that wheel hasn’t fully reset yet. Once the pressures are properly set and the sensor reads correctly, the light will clear.

If the light stays on after correcting tire pressures, you can bring the car down to Ryan Automotive Limited for a quick TPMS/ABS scan so we can reset it properly and confirm the sensor status.

Ryan Automotive Limited
Precision. Transparency. Excellence.
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by obisite: 12:27am On Dec 12, 2025
Hello Engr,

Please what could be possible prob, I started the car, trying to move.. Suddenly went off.. Notice it's could be fuel.. Then I refill.. Tried starting again.. It will start but not holding up.. But goes off.... A corola 05
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by RyanAutomotive: 10:05am On Dec 13, 2025
obisite:
Hello Engr,

Please what could be possible prob, I started the car, trying to move.. Suddenly went off.. Notice it's could be fuel.. Then I refill.. Tried starting again.. It will start but not holding up.. But goes off.... A corola 05
Good afternoon sir,

Thank you for the clear description — a car that starts but immediately goes off, and temporarily responds after refueling, is a classic symptom that requires a scan-first, inspect-second approach. Below is a full Ryan Automotive Limited diagnostic reply you can post professionally on Nairaland.



🔧 Professional Diagnostic Insight

1️⃣ Primary Causes — what most commonly leads to starting but immediately stalling

• Fuel delivery issues (most common):
Clogged fuel filter, weak fuel pump, or contaminated fuel can cause the engine to start but fail to sustain idle. Even after refueling, if the pump or filter is faulty, the problem returns.

• Ignition or crank/cam sensor faults:
A failing crankshaft or camshaft position sensor can intermittently cut ignition/fuel supply, causing the engine to start briefly and then die.

• Air intake or idle control problems:
Dirty throttle body, malfunctioning idle air control (IAC) valve, or vacuum leaks can prevent proper air-fuel mixture at idle, making the car stall immediately.

• Electrical/fuel relay issues (less common):
A weak fuel relay, ECU glitch, or poor grounding can intermittently cut power to the fuel system or ignition, causing short-lived starts.



2️⃣ Symptoms that point to each cause (what to observe)

• Fuel system: Engine dies seconds after start; sometimes improved by direct fuel top-up; may hear fuel pump struggle or clicking in the tank.

• Sensors: Engine starts normally for a brief moment but dies; check engine light may appear intermittently.

• Air intake/IAC: Rough or uneven idle, engine struggles to take in air; stalling occurs even with full fuel.

• Electrical/relay: Car may start and die unpredictably; other electrical quirks like flickering dash lights may accompany.



3️⃣ Correct (non-guess) Repair & Diagnostic Steps — scan-first, inspect-second
1. Full OBD2 scan — check engine codes for fuel, ignition, and sensor faults.
2. Fuel system inspection:
• Check fuel pump pressure and delivery.
• Inspect fuel filter and fuel quality.
• Inspect fuel injectors for clogging.
3. Air intake check: Clean throttle body and inspect idle air control valve; check for vacuum leaks.
4. Sensor check: Test crankshaft/camshaft sensors for correct signal output.
5. Electrical system check: Inspect fuel relays, fuses, and ground connections.
6. Confirm fault and replace only the failed component(s) — fuel pump, filter, sensor, or IAC — using Toyota-recommended parts and torque settings.



⚙️ Ryan Automotive Workshop Professional Take

In our experience with Toyota Corolla 2000–2008 models:
• ~50% of these short-start stalling cases are fuel pump or filter-related.
• ~30% are sensor faults, primarily crankshaft/camshaft sensors.
• The remaining 20% involve air intake or relay/electrical issues.

We always recommend a scan-first approach, followed by targeted inspections. Random parts replacement often leads to wasted cost and repeated visits.



🧩 Professional Summary & Next Steps

Short-term:
✅ Do not continue attempting repeated starts without inspection — this can stress the starter and fuel system.
✅ Ensure fuel is clean and tank is free from debris.

Next step:
➡️ Bring your Corolla (parked for several hours so it is cold) to Ryan Automotive Limited for a full diagnostic. We will:
• Run OBD2 scan and live data checks
• Inspect fuel system, sensors, and air intake
• Advise precise, costed repair plan

When posting on Nairaland, please include: full year, engine size, mileage, and recent service history. This ensures a more accurate first-response.



Ryan Automotive Limited
Precision. Transparency. Excellence.
Professional Auto Diagnostics • Engine & Transmission Experts • Genuine Parts & Cooling Division
Lagos, Nigeria
Contact via profile/signature
Ryan Automotive Workshop Division
Re: Tell Us Your Car Faults. Let's Assess And Fix Them by Talismann: 12:50pm On Dec 14, 2025
help,Lexus Rx350 2019 f-sport just started making noise when braking. I changed the rear brake pads to new ones, I still hear that annoying noise at the back driver side wheel when braking even at low speed.
1 2 3 ... 187 188 189 190 191 192 193 ... 205 Reply

Are You In FCT? We Have Solution To Your Car FaultsElectrical Vs Mechanical Faults: Which Is Worse?PAN Faults FG's Plan To Reduce Import Duty On Vehicles234

The Audi And Volkswagen Issues Resolution ThreadOfficial Nissan & Infiniti ThreadBMW Owners' Forum

Viewing this topic: Sannideen