Welcome, Guest: Register On Nairaland / LOGIN! / Trending / Recent / NewStats: 3,195,630 members, 7,958,874 topics. Date: Thursday, 26 September 2024 at 06:21 AM |
Nairaland Forum / Nairaland / General / Properties / Waterproofing Chemicals Available In Nigeria (13276 Views)
Contact Us For A State-of-the-art Waterproofing Products / Where You Can Buy Waterproofing Materials in Nigeria (2) (3) (4)
Waterproofing Chemicals Available In Nigeria by hiralconigeria: 11:13am On Jul 16, 2015 |
This list of waterproofing materials in Nigeria and their description is intended to assist anyone who is seeking for robust information about the type of waterproofing materials and where to get these materials in Nigeria. It will also assist any entrepreneur who wish to go into the business of waterproofing material supply. It will also help a lot of homes, industries and engineers on knowing the type of waterproofing materials needed for structural leakages or damping (leakages from decking or roofs of structures). SOLARCOAT For Terrace, Balcony and Wet-Damp Floor Description SOLARCOAT is a cost-efficient heat shield material used for reducing the interior temperatures of buildings working with a principle to block the radiant heat energy before it even reaches to the surface and thus minimize the surface temperature with its micro-spherical particles. Usage Areas Roofs and walls of state buildings and private buildings, All kinds of surfaces such as concrete, plaster, stone, metal, brick, wood and decorative coatings. Technical Data Appearance : Colored paste Density : 1,35±0,02 kg/dm3 Shore A Hardness : 65 Bonding Strength : >1,75 N/mm2 Elongation at break : >260% Crack Link Forming : 65 - 70% Water Penetration : None UV Endurance Test : No cracks Heat Reflection : >99% Thermal Conductivity : 0,09 W/m°K 0,09 W/m°K : 12 hours Advantages Single-component ready to use, easy application Reduces interior temperature of the residences Cuts down costs by cutting down energy consumption in cooling Prevents mold and fungus forming High bonding strength Forms crack link, maintains elasticity Resistant to UV beams Reflects the heat energy back even in dark colors Water-based, non-toxic and non-flammable Many color options Surface Preparation Clean the bubbles, holes and cracks on the surface and repair using elastic filler. Repair the extremely thin cracks by brushing towards the crack with a few layers of SOLARCOAT and filling. Line the absorbent surfaces using SPR 104 absorbent surface primer before hand. Clean the rusty sections of metal surfaces by blasting or other methods and then line using anti-rust primer. Ensure well bonding on other metal surfaces by preparing the surface appropriately (lining, oil removal application, and etching). Application Apply the primer selected for the application surface and leave to dry. Apply SOLARCOAT with a thickness that will reach the total thickness in two or more layers using a brush, roller or spraying with airless gun. Apply layers with 4 - 8 hour intervals and leave top coating overnight to dry. It is possible to achieve more proper application and appearance by dividing the application sections with a masking tape while apply on large surfaces. Cleaning Of The Tools The equipment can be cleaned with water immediately after use. When the material dries hard on the equipment, it can be cleaned by mechanical methods. Consumption 1,0-1,3 kg/m2 for 2 layers. Packaging In 20 kg plastic buckets Storage and Shelf Life Expiry date is 12 months starting from the date of manufacture provided that the product is stored in a cool area in its unopened original packaging and kept away from direct sunlight and freeze. 1 Like
|
Re: Waterproofing Chemicals Available In Nigeria by hiralconigeria: 11:14am On Jul 16, 2015 |
POLIXA 2 Description Polyurethane-based, two-component, solvent-free liquid waterproofing material. It is especially ideal for potable water tanks. Usage Areas It is especially developed for indoor waterproofing of water-tanks. It can be used on concrete, asphalt, marble, stucco, stone, wood and metal structures both for waterproofing and coating. Technical Data Density (A+B) : 1,45 g/cm3 Colour : Grey or blue Coefficient Of Vapor Diffusion Resistance : µ=34000 Pot Life : 30-45 minutes (20°C) Setting Time : Touch Dry : 6 hours : Completely dry : 24 hours Shore D Hardness : 40 Breaking Strength In Bending : 1080 kg Tensile Strength : 26,2 N/mm2 Adherence In Pullin : 10,52 kgf/cm2 Adherence In Sliding : 75,6 kgf/cm2 Compressive Breaking Strength : 58 kN Compressive Strength : 35 N/mm2 Resistance To Chemicals : Sulphuric Acid : Not Affected : Nitric Acid : Slightly Affected : Hydrochloric Acid : Not Affected : Sodium Hydroxide : Not Affected : Carbonic Acid : Not Affected : Ammoniac : Not Affected : Hydrogenperoxide : Not Affected : Potassium Chromat : Affected : Formic Acid : Affected : Vinegar Acid : Affected : Costic Acid : Affected Advantages It provides waterproofing; protects from corrosion; is resistant to friction, strokes, and certain chemicals. Because it does not contain any solvent, it can be safely applied indoors. It has strong adherence to surfaces it is applied. It is very durable. Surface Preparation The surface to be treated must be clean, durable, free from grease, and definitely dry. POLIXA 2 results in effervescence when applied to wet surfaces. Application The whole amount of hardener contained in the small pail is mixed with the whole amount of main component contained in the big pail to a homogenous consistency. The mixture must be consumed within 30 - 45 minutes; later it cannot be applied due to jelling. It must be applied at least in two coats, and each coat must be applied 6 hours later than the preceding coat. If this interval exceeds 24 hours, the first coat must be sandpapered prior to the application of the second coat. After the application the surface must be protected from water for at least 6 - 8 hours. It can be applied by a brush, or roller. Cleaning Of The Tools The equipment can be cleaned by using cellulosic thinner immediately after application. Consumption 1,20 -1,50 kg/m2 in two coats. Packaging 5 kg + 1 kg sets in metallic pails 20 kg + 4 kg sets in metallic pails Storage and Shelf Life 8 months minimum in its original packaging below 35°C. It 1 Like
|
Re: Waterproofing Chemicals Available In Nigeria by hiralconigeria: 11:16am On Jul 16, 2015 |
BMAST 100 Joint Sealants and Mastics Description Bitumen-rubber based, highly elastic, hot applicable masticate for both horizontal and vertical uses. Usage Areas For filling and repair of cement – concrete seams, Parking areas, For crack-filling before insulation, Water channels. Technical Data Gravity : 1,17 kg/dm3 Softening point : 96°C Penetration (25°C) : 40 - 50 dmm Fraas brittle point : -20°C Softening point : 96°C Application temperature : 160 - 180°C Elastic recovery : 90% Advantages It remains highly elastic between -20°C to +95°C. The bitumen in formulation ensures good waterproofing while rubber provides elasticity and anhances good adhesion to a variety of substrates including concrete, stone, brickwork and metal.It possesses good crack bridging and movement accommodation.It can be used both on vertical and horizontal aplications.Although it is recommended to be heated in pair wall boiler, it can also be heated on direct fire. Surface Preparation All seams and joints before filling shall be carefully cleaned by metal brushing or sanding. The dust should be removed by pressured air and be primed with B PR 101 or B PR 102. Application BMAST 100 will be heated to a maximum of 180°C and filled or poured to seam or crack. At applications exposed to traffic, sand can be spilled on BMAST 100. It can be exposed to usage after one hour. If 180°C is exceeded or the material is heated repeatedly, it looses the elastic property and cannot be improved again. Cleaning Of The Tools Equipment can be cleaned with mineral spirits or other solvents. Consumption 1,17 kg/lt Packaging Net 17 kg metal cans Storage and Shelf Life Unlimited 1 Like
|
Re: Waterproofing Chemicals Available In Nigeria by hiralconigeria: 11:18am On Jul 16, 2015 |
CRYSTAL 25 Description Cement-based water insulation material that is produced by modifying with the active chemical additives and that protects and makes the concrete reinforced concrete components watertight by creating a crystallized effect. Usage Areas In internal and external applications in the subbasement parts. In protection of the floor concretes against the humid and water leakages from the negative direction. In protection of the concrete components against the effects of the corrosive and detrimental salts carried by the underground waters. In insulation of the foundations, wet areas, tunnels, underground garages, and terrace gardens. In under-tile applications in wet areas like kitchen, balcony and restroom. Technical Data Color : Gray dust Bending strength : > 8 N/mm2 Compressive strength : > 45 N/mm2 Adhesion strength : w < 0.3 kg / m2h1/2 When applied from negative direction : >1 N/mm2 Density : 1,10 kg/dm3 Appearance : Grey powder Possitive pressure : >0,5MPa Negative pressure : >1,5MPa Advantages It is single component, and provides easy and fast application. When it reacts with water, it produces non-water-soluble crystals. It can be applied from negative and positive directions in water insulation of the concrete components. It increase the abrasive and impact strength of the concrete. It prevents the underground waters from rising in the subbasement level. It is nonflammable. Surface Preperation The application surface must be cleared of the substances that prevent adherences such as the form oil, dust, paint, dirt, detergent, etc. If the surface is too soft or dirty, it is necessary to make preliminary purification such as sandblasting or acid-wash. The concrete surfaces must be smooth, the cracks longer than 0.4 mm and the cavities with a depth up to 40 mm and width up to 25 mm must be repaired with REPAMERK repair mortars or PH 127. The sharp corners and joints of structural members must be chamfered. Prior to application, the surface must be saturated with water by moisturizing. Application CRYSTAL 25 is added to 7.25-7.5 kg water in a clean container while mixing at a low speed. The mixing process is continued until a homogenous and lump-free mixture is acquired (minimum 2 minutes). The acquired mortar is applied on moisturized thus water-saturated surface using an appropriate brush or roll as 2 coats in directions perpendicular to each other. The second coat is applied when the first coat is fresh but stiff enough to carry the second coat. No application thicker than 5 mm must be made at a single coat. Dry-Shake Method (Water insulation from Negative Direction): When the fresh concrete has been poured and stiffened a little bit, CRYSTAL 25 is shaken on the concrete directly from its sack with a consumption of 3-3.5 kg/m2. After the shaking process, it is fed in the concreteby smoothing with a trowel helicopter trowel.Dry-Shake Method (Water insulation from Positive Direction): Immediately before pouring the concrete, CRYSTAL 25 is shaken over the place in which the concrete will be poured directly from its sack as powder with a consumption of 2 kg/m2, and the concrete is poured on it. After the application, the surface must be protected against rain and frost for 24 hours. After the CRYSTAL 25 coating has stiffened, the applied surfaces are wetted 3 times a day. This application is continued for 3 days, but in very hot regions, it must be extended for a couple more days. In order to extend the life of CRYSTAL 25, it is necessary to make a protective alum, tile, ceramic, or enameled tile coating must be made in areas open to foot traffic. Cleaning Of The Tools The equipment can be cleaned with water immediately after use. When the material dries hard on the equipment, it can be cleaned by mechanical methods. Consumption Approximately 1,5 kg/m2 depending on the condition of the application surface. Packaging In 25 kg Kraft bags Storage and Shelf Life If it is stored in unopened, original package in a dry environment as stacked not more than 10 sacks high and protected against direct sunlight and frost, its expiry date is 12 months from the production date. 1 Like
|
Re: Waterproofing Chemicals Available In Nigeria by hiralconigeria: 11:21am On Jul 16, 2015 |
WATERSHOCK Description Cement-based, single component water insulation material that is produced by reinforcing with chemical additives and polymers, sets very rapidly, prevents active water leakages, has water repellence, and functioning as a plug in the application places by bulging slightly while stiffening. Usage Areas On wall and ground. In water tanks, water reservoirs, and water conduits. In wet areas like restrooms, bathrooms, swimming pools. In underground and surface structures, sewer systems. In foundations and basement interior walls. Technical Data Color : Grey Particle Size : 0- 0,5 mm Dry Unit Weight : 1.2±0.5 kg/dm3 Application Temperature : +5°C to + 35°C Pressure Strength : 30 minutes ≥ 6 N/mm : 24 hours ≥ 10 N/mm : 28 days ≥ 30 N/mm Advantages Fast drying. Highly resistant against pressure. It does not shrink, collapse, crack. Resistant against adverse weather conditions. It prevents moisture, thus cutting the unpressurized and weak water leakages. Nontoxic, nflammable. Surface Preperation The application surface must be cleared of any dirt, dust, paint, mud, etc. that may prevent the product from sticking on the surface. The cavities, cracks, or the leakage points from which the active water leakage occurs must be opened up to the solid ground. The surface must be dampened before the application. Application WATERSHOCK water insulation mortar in dust form (1 kg dust/0.2-0.3 liter water) is added into the clean container filled with the specified amount of water up to an amount that is sufficient for the size of the area to be filled and blended and mixed manually until a lump-free, homogeneous mixture is acquired. It is absolutely necessary to wear rubber glove during this process. The prepared mortar is shaped manually, pressed into the region to be plugged firmly, and held until it becomes rigid. The material must not be rubbed during this process. The regions from which too much water leaks or the deep holes can be plugged by applying multiple layers. The mortar application surface must be cooled and cured by damping for 15 minutes after the application. Cleaning Of The Tools The equipment can be cleaned with water immediately after use. When the material dries hard on the equipment, it can be cleaned by mechanical methods. Consumption 1.7 kg powder product is needed to acquire 1 liter fresh mortar. Packaging 5 kg plastic buckets. Storage and Shelf Life If it is stored in unopened, original package in a dry environment as protected against direct sunlight and frost, its expiry date is 8 months from the production date. 1 Like
|
Re: Waterproofing Chemicals Available In Nigeria by hiralconigeria: 11:23am On Jul 16, 2015 |
CHIMEX 127 Description It is a cement based, acrylic modified, two component, full elastic waterproofing coating mortar. Liquid component is a pure elastomeric resin emulsion. Powder component is a hydraulic binder mixture of additive and filling materials. Usage Areas It is used for providing a positive (interior) insulation barrier in potable water tanks, pools, and cisterns made up of brick, raw cement, or plaster. It is used as an undercoat, or a top coat in the insulation of terrace roofs.It is used for the positive insulation of grounds, retaining walls, and pitch walls, against ground moisture and water leakage. It is used for the insulation of basements from exterior. It is used for providing a waterproof barrier in balconies, and plant stands. It is used for preventing water leakage between floors, and in wet surfaces such as bathrooms, kitchens, toilets, etc. It is used for coating drainage channels, and seawater and sewage chambers. It is used for the insulation of galleries, and drainage, and water grooves. It is used in bridges, viaducts, and engineering structures as a protective coating to provide resistance against defrosting salts. It is used for the adherence of coating materials such as ceramic, granite, marble, etc. Technical Data Base : Cement / resin Compressive strength : 250 g/cm2 (28. Day) Bending strength : 85 kg/cm2 (concrete surface) Binding : 25 kg/cm2 Waterproofing : Waterproof at 1 mm thickness and 20 m water column pressure Elastic module : 28000 kg/cm2 Color : Grey Mixture density : 1,92 g/cm3 Application temperature : +5°C to +35°C Applied by : Brush or trowel Water pressure strength : 7 bars ( positive side ) Surface Preparation The surface to be treated must be clean, solid, and entirely free from any grease, rust, dirt and cement residue. Big pores and cracks must be filled with a proper REPAMERK or PH 127 for corner prior to application. The surface must be moisturized and it must be kept moistured during application. After the application of the first coat the parts prone to cracking such as pointed tips and horizontal/vertical intersections must be bevelled and rounded, and a second coat of CHIMEX 127 must be applied onto this bevel by using joint tape. Application 10 kgs of liquid component is poured into a clean container. The powder component is added and dissolved. The solution is mixed to a thick consistency acquiring a homogenous composition. (approximately 3 minutes with low a speed mixer.) Powder component must be added to liquid component. The mixture must be consumed in 45-60 minutes. CHIMEX 127 is applied in at least two coats using a brush, roller or trowel.Each coat should be applied before the previous coat dries and solidifies. If necessary, the surface should be slightly moisturized prior to the application of the next coat. Each coat must be applied at right angle to the direction of the application.Between the application of two coats, bearing elements such as alkali resistant joint tape, mortar mesh, etc. should be used on cracks or at horizontal/vertical connections. After the application of the last coat the surface is levelled by using a soft, moistured sponge. CHIMEX 127 should be applied with caution onto perlite concrete, gas concrete, or any concrete with high porosity; it should be applied onto these surfaces only after the application of grout or plaster. Cleaning Of The Tools The equipment can be cleaned with water immediately after use. When the material dries hard on the equipment, it can be cleaned by mechanical methods. Consumption Her katta 1-1,5 kg/m2. Packaging Powder component 20 kg kraft bag. Liquid component 10 lt plastic drum. Storage and Shelf Life Powder component must be kept in a cool and dry place, and on pallet. Liquid component must be protected from freeze. 12 months minimum in original packaging when kept in a cool and dry place. 1 Like
|
Re: Waterproofing Chemicals Available In Nigeria by hiralconigeria: 11:25am On Jul 16, 2015 |
CHIMEX 125 Cement Based Waterproofing Products Description Cement-acrylic based, two-component semi-elastic insulation material manufactured by modifying chemical additives and polymers, suitable for positive side application assuring water and humidity insulation. Usage Areas Vertical and horizontal. For insulations to be applied from positive. Water cisterns, pools, water tanks and reservoirs Foundations, basement walls, terraces, parking garages, flumes and retaining walls. In wet areas such as kitchens, balconies and bathrooms Technical Data Color (powder component) : Gray powder Color (liquid component) : White liquid emulsion Capillary Water Absorption : w< 0,05 kg / (m2h1/2) Bonding Strength : >1 N/mm2 Application Temperature : +5°C to +35°C Water pressure strength : 2 bars (positive side) Flexibility : Good Advantages High bonding capability Quick and easy application Doesn’t block concrete breathing No shrinkage and cracking Ensures water tightness beneath cement finish and ceramic with its excellent adherence and elasticity properties Surface Preparation The application surface must be free of materials such as molding oils, dust, paints, dirt, detergents that prevent bonding. Surface cracks must be repaired using REPAMERK repair mortars before application. Apply PH 127 chamfering on sharp corners and joints of building elements. The surface must be well saturated by damping before application. Application Pour CHIMEX 125 liquid component into a clean container and mix at a low speed and then slowly add CHIMEX 125 powder component. Continue mixing until obtaining a coagulation free and homogenous mixture. Wait 5 minutes for the air bubbles to disappear. Apply the resultant mixture onto the water absorbed surface using an appropriate brush or trowel to obtain 0,75-1 mm thickness. Once the first layer is drawn (4-6 hours), apply the second layer vertical to the first layer. A total 1,5-2 mm thickness application shall be achieved. Be careful to protect the surface against sunlight, rain and freeze during and after the application for 3 days minimum. Cleaning Of The Tools The equipment can be cleaned with water immediately after use. When the material dries hard on the equipment, it can be cleaned by mechanical methods. Consumption 1,0 – 1,5 kg/m2 for every layer Packaging Liquid component : In 6 kg plastic drums Powder component : In 19 kg kraft bags Storage and Shelf Life Expiry date is 12 months starting from the date of manufacture provided that the product is stored in a cool area in its unopened original packaging and kept away from direct sunlight and freeze. 1 Like
|
Re: Waterproofing Chemicals Available In Nigeria by hiralconigeria: 11:26am On Jul 16, 2015 |
FLEXACRYL Instant Waterproofer for roofs Product Overview A high performance, instant roof repair compound, ideal for emergency repairs or general maintenance Only requires one coat No primer required in most circumstances Can be applied in damp conditions Flexible Immediate waterproofing Ideal for areas subject to ponding Long lasting Exceptional weather resistance Solar reflective (in white) Labour and time saving Uses Use on cement, wood, metal and gutters Sizes 1kg, 2.5kg, 5kg, 20kg, in grey, white & black Coverage 1-2L/m2 The minimum order quantity, pricing, sample availability, delivery time and shipping cost will be discussed with the clients. For further details on FLEXACRYL, please send us the inquiry. Available at Hiralcp Nigeria Limited A.G Leventis Yard, Iddo House, Iddo, Lagos, Nigeria Call 08028654878 08063068758 https://www.youtube.com/watch?v=0tzJp0lbKuU
|
Re: Waterproofing Chemicals Available In Nigeria by hiralconigeria: 11:27am On Jul 16, 2015 |
CEMENTONE FELTFIX Bituminous Felt Adhesive for Roofs Roofing felt adhesive Product Overview A cold applied, solvent borne bituminous adhesive Uses Use for bonding all types of roofing felt Sizes 1 litre, 2.5 litre, 5 litre, 22.5 litre Coverage 0.6-0.8L/m2 as a felt adhesive Available at Hiralco Nigeria Limited A.G Leventis Yard, Iddo House, Iddo, Lagos, Nigeria Call 08028654878, 08063068758 info@hiralcogroup.com 1 Like
|
Re: Waterproofing Chemicals Available In Nigeria by hiralconigeria: 11:28am On Jul 16, 2015 |
CEMENTONE BITUMEN BLACK PAINT Black Waterproofing Paint A general purpose black paint Product Overview A solvent-borne bituminous black paint Uses Suitable for use on wood, metal and cement Sizes 1 litre, 2.5 litre, 5 litre, 22.5 litre, 200 litre tins Coverage 4m2 - 6m2 per litre per coat Available at Hiralco Nigeria Limited A.G Leventis Yard, Iddo House, Iddo, Lagos, Nigeria Call 08028654878, 08063068758 info@hiralcogroup.com
|
Re: Waterproofing Chemicals Available In Nigeria by hiralconigeria: 11:29am On Jul 16, 2015 |
AQUAPRUFE Flexible Damp-Proofer and Waterproofer Product Overview Solvent free, odourless and taint free. Ideal for applying indoors No need for a separate primer Can be applied to damp surfaces Cold-applied High rubber content making it flexible Exceptional waterproofing Uses Use on wood, plaster, cement and polystyrene Sizes 2.5 litre, 5 litre, 25 litre Coverage Floors: 6-6.5m2 per 5 litre bucket per coat Walls: 10m2 per 5 litre bucket per coat Available at Hiralco Nigeria Limited A.G Leventis Yard, Iddo House, Iddo, Lagos, Nigeria Call 08028654878, 08063068758 info@hiralcogroup.com.
|
Re: Waterproofing Chemicals Available In Nigeria by hiralconigeria: 11:30am On Jul 16, 2015 |
CEMENTONE BITUPROOF EMULSION SOLVENT FREE WATERPROOFER FOR ROOFS Uses Roof Waterproofing. • Provides an economical but long lasting waterproof treatment, for use under good drying conditions. fibre/cement, roofing felt, mastic asphalt, corrugated iron, slates, tiles, lead, copper and zinc as a water and moisture barrier. Metal Protection • Provides protection against the corrosion of pipes, structural steelwork and other metallic equipment Available at Hiralco Nigeria Limited A.G Leventis Yard, Iddo House, Iddo, Lagos, Nigeria Call 08028654878, 08063068758 info@hiralcogroup.com.
|
Re: Waterproofing Chemicals Available In Nigeria by hiralconigeria: 11:31am On Jul 16, 2015 |
CEMENTONE RUFABRUSH_ BRUSHABLE WATERPROOFER FOR ROOFS Product Overview Contract grade, general purpose, bituminous waterproofing compound Rufabrush cures quickly and is resistant to rain and frost during the drying process Uses Use on all common roofing surfaces, including mastic asphalt, roof felt, corrugated iron, fibre cement, slates, lead, copper and zinc Sizes 2.5 litre, 5 litre, 22.5 litre Coverage 1.4m2 per litre per coat Available at Hiralco Nigeria Limited A.G Leventis Yard, Iddo House, Iddo, Lagos, Nigeria Call 08028654878, 08063068758 info@hiralcogroup.com.
|
Re: Waterproofing Chemicals Available In Nigeria by hiralconigeria: 11:32am On Jul 16, 2015 |
SBR Strengthens & waterproofs concrete & mortar Cementone SBR is a specially modified Styrene Butadiene Co-polymer Latex for cement and mortar. It toughens, waterproofs and improves chemical and abrasion resistance of renders, screeds and other cement based mixes. It is recommended for use in effluent tanks, dairies, food factories, fertiliser stores and other demanding situations. Cementone SBR is an excellent all round primer and bonding admixture FEATURES • Improves adhesion. • Toughens floors and screeds. • Provides superior frost, water, chemical and abrasion resistance. • Ideal for damp and wet conditions. • Improves workability of mix. • Reduces water content of mix. • Improves flexibility, reduces cracking. TYPICAL USES • Pointing, patching and bedding. • Waterproof rendering, tanking and flooring. • Bonding aid for render and plaster. • Primer systems. Available at Hiralco Nigeria Limited A.G Leventis Yard, Iddo House, Iddo, Lagos, Nigeria Call 08028654878, 08063068758 info@hiralcogroup.com
|
Re: Waterproofing Chemicals Available In Nigeria by hiralconigeria: 11:35am On Jul 16, 2015 |
IMPERTEXSA The Power of IMPERTEXSA....Permanent solution to leakages on . concrete, pre-fabricated concrete, flat roofs, balconies, terraces, vaults, domes, gutter, pots, etc. ✔Totally impermeable to rainwater ✔ Breathable. Permeable to air and water vapour, thus allowing the substrate to breathe ✔ Great elongation. ✔ Ageing-resistant. ✔ Weather-resistant. ✔ High elasticity at all temperatures. Uses Re-roofing of roofs with the following finishes: bituminous waterproofing, normal and unglazed ceramic tiles, concrete, mortar, asbestos cement, projected polyurethane foam, expanded polyethylene, wood, etc. Waterproofing coating for irregular geometry surfaces and protective coating of vertical surfaces. Protection of concrete structures in marine environment. Apply on surfaces with sufficient pitch, so there is no possibility of ponded water Call Hiralco Nig Ltd 08028654878 08063068758 info@hiralcogroup.com
|
Re: Waterproofing Chemicals Available In Nigeria by hiralconigeria: 10:39am On Aug 25, 2015 |
IMPERTEXSA The Power of IMPERTEXSA....Permanent solution to leakages on . concrete, pre-fabricated concrete, flat roofs, balconies, terraces, vaults, domes, gutter, pots, etc. ✔Totally impermeable to rainwater ✔ Breathable. Permeable to air and water vapour, thus allowing the substrate to breathe ✔ Great elongation. ✔ Ageing-resistant. ✔ Weather-resistant. ✔ High elasticity at all temperatures. Uses Re-roofing of roofs with the following finishes: bituminous waterproofing, normal and unglazed ceramic tiles, concrete, mortar, asbestos cement, projected polyurethane foam, expanded polyethylene, wood, etc. Waterproofing coating for irregular geometry surfaces and protective coating of vertical surfaces. Protection of concrete structures in marine environment. Apply on surfaces with sufficient pitch, so there is no possibility of ponded water Call Hiralco Nig Ltd 08028654878 08063068758 info@hiralcogroup.com 1 Like |
Re: Waterproofing Chemicals Available In Nigeria by hiralconigeria: 2:25pm On Aug 25, 2015 |
Call Hiralco Nig Ltd 08028654878 08063068758 info@hiralcogroup.com 1 Like |
Re: Waterproofing Chemicals Available In Nigeria by ZhiCci: 1:26am On Oct 03, 2015 |
hello, do you have any waterproof chemical or spray for fabrics? |
Re: Waterproofing Chemicals Available In Nigeria by tuneh(f): 6:25pm On Oct 08, 2015 |
how much for the SBR? |
Re: Waterproofing Chemicals Available In Nigeria by PipMc(m): 11:15pm On Apr 30, 2016 |
what r the cost? |
Re: Waterproofing Chemicals Available In Nigeria by coxlinda(m): 2:29pm On Jun 19, 2020 |
Pls can you give the best waterproof chemical for foundation...and the price the contact number you drop is not getting true.. |
Re: Waterproofing Chemicals Available In Nigeria by toyomars(m): 5:39am On Mar 09, 2021 |
hiralconigeria: Your numbers are not reachable anymore and your are not responding to your emails. |
Re: Waterproofing Chemicals Available In Nigeria by rogen(m): 1:19pm On Jul 14, 2021 |
FOR YOUR WATERPROOFING- Contact MOFORCE (08034539340/08095551990) Waterproofing of Leaking Rooftop, Seepage in Concrete Slab, Basement, Open Terrace, Tank Area, Parapet Wall etc. Damproofing Membrane for the foundation of new buildings to prevent rising damp in walls. Dampness Treatment and Prevention in existing buildings. |
Re: Waterproofing Chemicals Available In Nigeria by Geekop: 10:42pm On Sep 06, 2022 |
What are nice thread we have here... Great job... We also proffer waterproofing solutions 07039310763 |
(1) (Reply)
Goodnews To RCCG Members..pics Attached / Contact Us Today For Ur Architectural Design / Buy And Build Land At Lekki Epe Express Way,before Eleko Junction Opposite Pretz
(Go Up)
Sections: politics (1) business autos (1) jobs (1) career education (1) romance computers phones travel sports fashion health religion celebs tv-movies music-radio literature webmasters programming techmarket Links: (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) Nairaland - Copyright © 2005 - 2024 Oluwaseun Osewa. All rights reserved. See How To Advertise. 92 |