₦airaland Forum

bionixs:
little boy , move to the kiddies section

onye ngbu

nwakibie3:
onye ngbu

to pass common Jamb no gree you. ihe obula ihuru,imachanye onu. ichere na ebe a bu main market Onitsha ?

bionixs:
to pass common Jamb no gree you. ihe obula ihuru,imachanye onu. ichere na ebe a bu main market Onitsha ?

Lol.. u that have PhD how much do u have in ur acct?

Ratello:
I love this.....but the Lekki "thing" is very discouraging at least going by the water aspect

Dear respondent,

Thanks for the feedback. We totally understand your fears. However, this particular area is not water prone. Upon enquiry, the agents involved have assured us of this. You may want to satisfy your curiosity by calling these numbers: 08138718647; 08075256644 to book a viewing/inspection date. Thank you and God bless you.
Regards

KayDEAN:
Depending on location, topography, height and quality of block. All in all, it shouldn't exceed 25k per plot

How much do u think one block cos and how much do u think they charge for a single block? He will spent 1m

ArcToyin:
How much do u think one block cos and how much do u think they charge for a single block? He will spent 1m

I tire ooo.

[U simply amazing thanks so much



quote author=twascas post=59291115]The Simplest Way To Calculate The Numbers Of Blocks U Need For Your Fence


The simplest way to calculate the numbers of blocks you need for your fence project, assuming you are fencing a land measuring 120 feet by 60 ft, a standard plot

This calculation is based on 9 inches block fence .
The measurement we are using is 120 ft (length) and since we have two lengths that is multiply by 2 which is240 ft. (120 x 2) = 240

The breadth is 60 ft and also since we have 2 breadths that equal 120 ft (60 x 2) = 120
Then (240 + 120) that is 360 feet perimeter line fencing.

The calculation

(we are to convert this 360 feet to inches ) since a foot is 12 inches , now let us multiply 12 inches by 360 ftwhich is 4320 inches.

Now to get the line numbers of blocks that will go around the fence perimeters of 4320 inches or 360 feet, we would need to divide 4320 by 18 inches, since the length of any block be it 6 inches or 9 inches is 18inches.

Now 4320 inches divide by 18 inches is approximately240 line of blocks , then we must multiply that by the numbers of coaches of blocks you want for your height, assuming 7 ft which is 9 coaches that means 240 multiply by 9 which is 2160 blocks and that is all you need anything aside from this is fake and fraud, this calculation is derive by me professionally and i have been using it without any mistake, but always remember to add 10 % of blocks to it because of broken blocks, and for this work, you only need 30 bags of cements, one bag of cement to 70 blocks, is standard.

for your pillars between the fence, let assume 6 blocks far from the next pillar, that means 6 divide by 240 which is 40 pillars, 1 bag of cement to 2 pillars standard, that is 17 bags plus 40 bags that is 47 bags is need by me to do this fence, if i'm in position and you should also to add 15 bags for floor blinding of the fence making 62 bags of cement.

Then, we need to minus the gate and the pillars that are also taking space in the fence.

The gate is 12 ft, let us assume the gate columns or pillars is 14 inches each, we have 2 pillars holding the gate, that is 28 inches or 2. 4 feet plus 12 feet that is 14.4 feet or approximately 15 feet.

Remember we already calculate the pillars that 40 pillars is need for the measurement.

Each pillar or column for 9 inches concrete is 9 inches square, 9 x 40 = 360 inches that is (30 feet + 15 feet = 45 feet ) / 18 inches = 30 blocks multiply by the number of coaches, 30 x 9 = 270 block minus 2160 blocks = 1890 blocks in total.

40 lengths of 12mm iron rod, since one pillar is equivalent to 1 length.

3 lengths of 16mm iron rod for the 2 big pillars holding the gate.

90 planks of soft wood for the framing.

1 truck of granite (granite would be use for the wall foundation and columns)

5 trucks of sharp sand[/quote]

Very accurate measurements.