if its cannot be up to container, you can use CMB shipping,you can buy break pad in china, because its new, and all this kind petty parts sell fast in market. but china is no go area for cars/butcher.

ibrahimdoc:
my brother thank u so much. I hv someone in US. but to be frank i hv only 500k and i want to import only toyota breakpads for now, and i know with this amount, it can't fill up a container, what is the best means to bring it into the country? i am waiting for ur response. Thank u.

Hello,
is there anyone with experience in the buisness of spares parts for heavy duty vehicles.
I want to set up my shop in the Lekki free trade zone area.

chiefkpokp:
even if its N50,000 or N20,000 you have, you can use it also to buy Horn, you can imports car horns for 50,000, and sell for N600 or N700, for set, you can still turn your capital to X3..... Just know your way thats all. if you have good products, you will not waist your time looking for buyer.

brother pls answer me on whatsapp

Na u be the man when write me for whatsapp, yesterday or so? i was very busy and tired and could not reply the message, but the message turns out to be war, so make the conversation non go cause quarel, naim i just kukuman lockup.

ibrahimdoc:
brother pls answer me on whatsapp

DesChyko:
Location first? Then what machine spare parts? Finally, what kind of spare part? I'm assuming your target is China?

Boss abeg ur can I ve ur digits

China automobile parts are of lower quality

galaxy2020:
China automobile parts are of lower quality

This general statement is not true. Not all China parts are of low quality. You have different grades ranging from low to high.

In fact some very top automobile brands have some of their auto parts manufactured in China, because of cheaper production costs.

I do agree with you but Nigerians naturally will not go for the high quality ones to enable them make huge profits. Countries like Germany and US do not compromise standard.

Nice thread, couldn't have come at a better time

Hello everyone. Nice thread you got here

Please, can one set up a shop of tricyclye(keke) spare parts with 300k?

I am really a novice in spare parts biz, but, i am thinking of learning for two months, and then invest in it.

chiefkpokp:
Bros dont just reason china, were will you get most used cars to butcher? will u get used Benz cars in china to butcher or even to ship to naija? Can you get Volvwagen parts or used cars to butcher or ship to naija? even honda/toyotal self, Were and how easy do you think you get access to this Cars to butcher or even ship? listen if you have any friend in china, tell him to look for comon Nissan sunny in China, for example, Nissan Sunny 2004, can be sold 800euro, or less than 850usd, or 410pounds(righthand drive), all this used ones oooo. I belt you if u can even see it in china, if you see ham for 1500usd, Make u go do thanksgiven for church.... What am tryin to say is that china is good for New things, But for motor spare parts, You non go see buyer, because people prefer tokunbor parts than new parts nowaday, Wether na d money dey cause ham oooo, i never still no why.

I learnt Spare parts from my Uncle. What you said is nothing but the truth. Buyers prefer buying used tokunbo parts to New ones. Used tokunbo parts are of original quality while the new ones from China, (even the ones made in Nnewi, Anambra state included) are of poor/qualities.....

I learnt Spare parts from my Uncle for 4 good years. I don't really like the business, so I ventured into Laptop business. I will be importing laptops online. My laptop apprenticeship made the outer world more open to me , so I am also considering venturing into Motor Spare parts business too as a side-business.
I am wondering if it can be done through online importation?

Macelliot:

I learnt Spare parts from my Uncle. What you said is nothing but the truth. Buyers prefer buying used tokunbo parts to New ones. Used tokunbo parts are of original quality while the new ones from China, (even the ones made in Nnewi, Anambra state included) are of poor/qualities.....

I learnt Spare parts from my Uncle for 4 good years. I don't really like the business, so I ventured into Laptop business. I will be importing laptops online. My laptop apprenticeship made the outer world more open to me , so I am also considering venturing into Motor Spare parts business too as a side-business.
I am wondering if it can be done through online importation?

very well,

Macelliot:

I learnt Spare parts from my Uncle. What you said is nothing but the truth. Buyers prefer buying used tokunbo parts to New ones. Used tokunbo parts are of original quality while the new ones from China, (even the ones made in Nnewi, Anambra state included) are of poor/qualities.....

I learnt Spare parts from my Uncle for 4 good years. I don't really like the business, so I ventured into Laptop business. I will be importing laptops online. My laptop apprenticeship made the outer world more open to me , so I am also considering venturing into Motor Spare parts business too as a side-business.
I am wondering if it can be done through online importation?

Bro, don't know if you will be willing to put me through the lappy importation Biz, i'll be very grateful if you do.
.
Thanks in advance.

winnar:
Hello everyone. Nice thread you got here

Please, can one set up a shop of tricyclye(keke) spare parts with 300k?

I am really a novice in spare parts biz, but, i am thinking of learning for two months, and then invest in it.

This is good business.but many people don't no.

chiefkpokp:


This is good business.but many people don't no.

How can a novice go into this business.

chiefkpokp:


This is good business.but many people don't no.

Hello dear, Do you think 300k will be enough to start it? Do you also think i can learn about this biz within two months.

I'm thinking of setting up a shop in a keke mechanic garage or workshop.

alakara:

How can a novice go into this business.

We all were once a novice in one thing or the other.

Nobody was born with knowledge.

If you read again.., you will see i asked if i can learn it within 2months?

,

winnar:
Hello dear, Do you think 300k will be enough to start it? Do you also think i can learn about this biz within two months.

I'm thinking of setting up a shop in a keke mechanic garage or workshop.

No money is enough to start business, it's gradual process,you can take a pen and a note book, lists out the parts(underneaths) that make Kekenape,this lists, take it to any shop they sell parts,use it to determine the prices of the parts,that will give u insights of how d business is run, na modern life we dey now, u don't need to learn d business for 3months before u start ur own.......

chiefkpokp:


No money is enough to start business, it's gradual process,you can take a pen and a note book, lists out the parts(underneaths) that make Kekenape,this lists, take it to any shop they sell parts,use it to determine the prices of the parts,that will give u insights of how d business is run, na modern life we dey now, u don't need to learn d business for 3months before u start ur own.......

Awww. Thank you sir. Thank you so much.

I am interested in this auto spare parts business. Can I get someone to partner with?

obalufonlll
ogboato

Ogbo Ato

OBALUFON

0balufonlll

arewabee52:
0balufonlll

XXXX

chiefkpokp:


0 8 1 5 9 8 7 06 20 whatsapp only

Sent you email, text and whatsapp message.

Hello

Distributors and Dealers Urgently needed!!!

We are importer of Yieldmaster injection Cleaner. Yieldmaster injection cleaner is a German brand

* It removes ENGINE HESITATION & BLACK SMOKE
* it improves FUEL ECONOMY and restores THROTTLE RESPONSE.


Presentation:
1 pack= 24pcs


Call 07016551055
for BULK BUYERS ONLY!!!

Very interesting am in US,New York to be precise want to start importing used spare parts have people at Ladipo . But how to go about getting the parts I need is where I need help . Please I don't mind if you can connect me to your brother who is in the US.TO just seek for more guidance on how to get it cheaper.
THANKS.

chiefkpokp:
@op, motor spare parts is good if you understand the market, I have elder brothers in USA,UK,Spain, They are both into motor/parts importation, I do invest my own money, While the one in USA specialised mostly on container, Cars,Parts,, the one in UK, Buys cheap righthand vehicles,Bucher the parts and load same on container, The one in spain does same, he buys cars too,butcher and load, But he does not use container, He specialized on ford transit Bus, he prefer to Buy 3 ford transit bus loaded with engines,parts, Mainly Volkswagen(goft 3) engines and underneats, Nissan vannets, toyota, And when he loads this 3 ford transits, its equivalent to 40ft container, its will be cleared, I hire drivers to help me drive them to Trinity,Where we rent warehouse, sell off the parts, while selling the parts, Aboki guys would not allow the 3fords transit to leave Lagos-Bini, They will buy those fords. I only invest in the one in spain, Because I can buy 1 ford transit bus, while he loads it with his parts, or he buys the ford transit bus, and my parts will be inside..... with all this, i could invest little of like 600k to get 800k for Bus, or invest 600k for parts, and make 1.2m as profits. The hot cake parts is Volkswagen(golf3) Engine and underneat, I can invest like 300k for 10 engines and underneat, and when its get to the market, i sell them sharp sharp for (very cheap) 120k as clearance, I get my 1.2 or more than. You cannot do it yourself, you need to have someone over there. and also most importantly, any of those IBo guys that have links to buyers that help you sells, They will tell you what and what is moving in the market and they will tell you how much its sold, then its left for you to do your calculation to balance incase you wish to import.....Good luck.

Very interesting am in US,New York to be precise want to start importing used spare parts have people at Ladipo . But how to go about getting the parts I need is where I need help . Please I don't mind if you can connect me to your brother who is in the US.TO just seek for more guidance on how to get it cheaper.
THANKS.

doncharlesdee:
Very interesting am in US,New York to be precise want to start importing used spare parts have people at Ladipo . But how to go about getting the parts I need is where I need help . Please I don't mind if you can connect me to your brother who is in the US.TO just seek for more guidance on how to get it cheaper.
THANKS.

Funny enough, they are other things you can buy and ship to Nigeria at cheaper rate. Cheap laptop, accessories and iphone sell faster