omololaglo:

yes I have unscrew and clean , what do U say I should change please?

if it persists after cleaning then change the valve

Hi, I need a gen to power a 150l freezer, an LED TV, DSTV as well as 10 9w bulbs. I saw a senwei 4.5kva on jumia but it felt somehow suspicious. What rating do I really need and best product to go for. My budget is 75k.

Hello.. Please i want to get a minimum of 1.8 kva gen tomorrow.. I need recommendations on what to go for. and how to spot an original.

Thanks

Have being reading the trend , the name junior tec max as the best, can it power 77w output fridge+freezer, 1 32 inches lg TV,averge sound system, 1 averge standing fan, 1 bulb, charging of laptops and phones.

Thanks

Preator:
Hi, I need a gen to power a 150l freezer, an LED TV, DSTV as well as 10 9w bulbs. I saw a senwei 4.5kva on jumia but it felt somehow suspicious. What rating do I really need and best product to go for. My budget is 75k.

hello go for sumec fireman spg 3000, rating output 2.8kva. Powers my 346liters freezer without any hussle, make sure you buy the original one with pure copper.

temmy59:
Hello.. Please i want to get a minimum of 1.8 kva gen tomorrow.. I need recommendations on what to go for. and how to spot an original.

Thanks

Have being reading the trend , the name junior tec max as the best, can it power 77w output fridge+freezer, 1 32 inches lg TV,averge sound system, 1 averge standing fan, 1 bulb, charging of laptops and phones.

Thanks

if it's tec you're going for then go for it... tec doesn't have fake and yes it will power...

Hello all, can I plug my tec stabilizer to Generator to enable my fridge work well? The generator is a sumec spg 3000e2

rubi96:
Hello all, can I plug my tec stabilizer to Generator to enable my fridge work well? The generator is a sumec spg 3000 3.5kva.

which one is spg 3000 3.5kva? There is nothing like that! Are you sure you bought an original gen?

Rikon:
which one is spg 3000 3.5kva? There is nothing like that! Are you bought an original gen?

. It's spg 3000e2 so I assumed that it's kva should be about 3.5

I bought a tiger 2700 from a friend. The gen consumes more fuel than expected. My friend assured me it wasn't like that. The only thing I've changed is carburetor. Can a new carburetor cause excessive fuel consumption

rubi96:
. It's spg 3000e2 so I assumed that it's kva should be about 3.5

yes it can carry it

After 2months on this thread I decide to go with the recommendationsfrom the engineers in the house....I choose to buy this generator Tec junior max for 60k. Pls any assistance where to buy cheap and genue here in lagos pls help....

Good day professor please I want to get a generator that can power my industrial sewing machine, will use it and TV alone when using the generator. But when I am not using the machine I will use a 150L freezer and TV on it and other minor household stuff like laptop, phone charging and fan. Please is lutian 3.2~3.5 kva okay for it
I may once in a while use iron separately on it, by separately I mean off every other thing and use it on the generator
The sewing machine is
400w 1/2hp
Vamp: 268A

Iron is: 1300w

And can you please give me contact of a generator dealer thank you.

bahlow87:
After 2months on this thread I decide to go with the recommendationsfrom the engineers in the house....I choose to buy this generator Tec junior max for 60k. Pls any assistance where to buy cheap and genue here in lagos pls help....

PZ at Toyota, bus stop, opposite Ladipo. By DHL. That's if you're in Lagos

GRACEGLORY:



PZ at Toyota, bus stop, opposite Ladipo. By DHL. That's if you're in Lagos

tnks bro....but this is way far to island

I have this Sumec ECO1990-S we use at the office powering just laptops, standing fan and lights.

These days
1. it smokes very badly (blue smoke)
2. It runs short of oil very fast
3. It consumes a lot of fuel (about a liter an hour)

The generator technician doesn't seem to know how to fix the issues properly.

Is there any hope for the generator to go back to good working condition or do I just buy another one?

Hello Prof and House,

So after reading plenty reviews on Lutian LT3990E I went ahead to buy mid May, now about a month old and barely used.
In the past 4 days, I have been using it all night, changed the oil two days back. Last night was different as it went off about 1:00AM, start again running went inside few minutes later it went off again. Start again went inside, few minutes running and Off again. Start again, was about 10 steps away from its location and it went off, start again went inside, off again. Phewww!!!
Na so, went back start, running fine, then only took few seconds to go off and so... right now, it only last few seconds before going off.
Have cleaned the plug but no change. Now I have a feeling its cutting fuel supply that I cant dig into myself.
Please any Pro with best remedy should relate to this post to Equip me on what can be done...

Help me ooo this is an SOS Call...
Kind regards

cluewebhost:
I have this Sumec ECO1990-S we use at the office powering just laptops, standing fan and lights.

These days
1. it smokes very badly (blue smoke)
2. It runs short of oil very fast
3. It consumes a lot of fuel (about a liter an hour)

The generator technician doesn't seem to know how to fix the issues properly.

Is there any hope for the generator to go back to good working condition or do I just buy another one?

Piston and rings

ReppingLocals:
Hello Prof and House,

So after reading plenty reviews on Lutian LT3990E I went ahead to buy mid May, now about a month old and barely used.
In the past 4 days, I have been using it all night, changed the oil two days back. Last night was different as it went off about 1:00AM, start again running went inside few minutes later it went off again. Start again went inside, few minutes running and Off again. Start again, was about 10 steps away from its location and it went off, start again went inside, off again. Phewww!!!
Na so, went back start, running fine, then only took few seconds to go off and so... right now, it only last few seconds before going off.
Have cleaned the plug but no change. Now I have a feeling its cutting fuel supply that I cant dig into myself.
Please any Pro with best remedy should relate to this post to Equip me on what can be done...

Help me ooo this is an SOS Call...
Kind regards

check oil and also check if fuel is coming out from the valve properly

ozoneymcm:
I bought a tiger 2700 from a friend. The gen consumes more fuel than expected. My friend assured me it wasn't like that. The only thing I've changed is carburetor. Can a new carburetor cause excessive fuel consumption

Does anybody have an answer for me . Please o. I haven't seen any post from prof for a while. Who knows info about him

ozoneymcm:

Does anybody have an answer for me . Please o. I haven't seen any post from prof for a while. Who knows info about him

adjust the carburettor and hope you bought original cab

lilclin:
check oil and also check if fuel is coming out from the valve properly

Thanks.
Changed oil, oil level fine.
Checking fuel supply valve means opening the cab right?

Do you have an idea what it would cost to fix them in Port Harcourt or a contact?

lilclin:
Piston and rings

Is any of these a good deal? Just for a 150l freezer , TV and a few lighting points.

ReppingLocals:


Thanks.
Changed oil, oil level fine.
Checking fuel supply valve means opening the cab right?

not cab... The fuel tap you on when you want to on the gen. Just remove the pipe and see if fuel is passing freely

cluewebhost:
Do you have an idea what it would cost to fix them in Port Harcourt or a contact?

I once used sumec 1800 and the original Piston and rings is about 2k.. I would advise you take the gen to where you bought it and tell them to direct you to a good engineer that will work it for you. I made a mistake giving mine to a road side engineer and he uselessed the gen. Had to sell it off and buy thermocool

Preator:
Is any of these a good deal? Just for a 150l freezer , TV and a few lighting points.

elepaq is good and be sure it's original

lilclin:
I once used sumec 1800 and the original Piston and rings is about 2k.. I would advise you take the gen to where you bought it and tell them to direct you to a good engineer that will work it for you. I made a mistake giving mine to a road side engineer and he uselessed the gen. Had to sell it off and buy thermocool

Thanks.

lilclin:
not cab... The fuel tap you on when you want to on the gen. Just remove the pipe and see if fuel is passing freely

Running fine, took out fuel there to clean plug...
Looked inside tank no blockage.

ReppingLocals:


Running fine, took out fuel there to clean plug...
Looked inside tank no blockage.

what sound does it make before turning off

Hello Professor, I am looking at buying a generator that can power a mini fridge, 32 inches led tv, two small standing fan, dstv and lighting points. Will a 1.8kva generator work. What do you think about this senwei generator on konga