Praxtech:

Run...flee take a flight from all plans to wreck your destiny this year. Lastly that person is NOT your friend

Haba....... Are you trying to say, he is simply attempting to pass over his problems......


The man is already in love o.......

Lexusgs430:




Haba....... Are you trying to say, he is simply attempting to pass over his problems......


The man is already in love o.......

He needs to get a reality check. No mechanic workshop trips and the engine bay looks like a JuJu shrine

Chaiiiii....thank you o bros.and d guy is agreeing to even drive d car to my PLC....see wahala
Run...flee take a flight from all plans to wreck your destiny this year. Lastly that person is pNOT your friend[/quote]

Thanks everyone for ur solid advice.
Abeg make I find one simple ,mechanically affordable ride buy ...afterall I need it for everyday transport to my office.

Any idea is welcomed.:a normal 4plug ride that is cost efficient.

Hello wise ones. I plan on buying a Nigerian used Nissan tiida and saw one with a sound engine and gear (engine was replaced last year) but scanned and got a few codes
P0118
P0141
P0340
P0135
How serious are these codes because I don't want to use my hand carry problem. Thanks
@costee @nurey

Signorkeane:
Hello wise ones. I plan on buying a Nigerian used Nissan tiida and saw one with a sound engine and gear (engine was replaced last year) but scanned and got a few codes
P0118
P0141
P0340
P0135
How serious are these codes because I don't want to use my hand carry problem. Thanks
@costee @nurey

here are what is the cause of the engine maintenance light

nurey:


here are what is the cause of the engine maintenance light

Thanks boss. Are these easy fix or a death sentence?

Signorkeane:


Thanks boss. Are these easy fix or a death sentence?

They are easy fix, for the camshaft I would advise you buy new OEM not Tokunbo or chinko. That one can get you stranded in enemy territory

nurey:


They are easy fix, for the camshaft I would advise you buy new OEM not Tokunbo or chinko. That one can get you stranded in enemy territory

Thanks boss

Hello Gurus,

I need your help.

The dashboard around the navigation screen and cd player is broken. Where can I get a replacement? I have been to Ladipo and no show there.

My vehicle - Infiniti QX56 2005.

Thank you.

kasshoggi:
Hello Gurus,

I need your help.

The dashboard around the navigation screen and cd player is broken. Where can I get a replacement? I have been to Ladipo and no show there.

My vehicle - Infiniti QX56 2005.

Thank you.

E go hard o.

Cc: oluwanisola

kasshoggi:
Hello Gurus,

I need your help.

The dashboard around the navigation screen and cd player is broken. Where can I get a replacement? I have been to Ladipo and no show there.

My vehicle - Infiniti QX56 2005.

Thank you.

Is this what you are looking for ?

Crixie:

Is this what you are looking for ?

No Sir, the plastic part that borders the navigation screen and the top/sides of the CD changer. that seems like the only serious plastic part of the vehicle. I have attached for your attention.

Cheers

Good afternoon friends. Sorry, a friend of mine’s 2014 Nissan Pathfinder has ATF power steering fluid leaking profusely. Please can you recommend a competent Nissan Mechanic who can help him out. Location is GBAGADA Lagos.

Thanks in anticipation.

kasshoggi:


No Sir, the plastic part that borders the navigation screen and the top/sides of the CD changer. that seems like the only serious plastic part of the vehicle. I have attached for your attention.

Cheers

Your best bet is eBay.

kingreign:


Your best bet is eBay.

Thanks Sir. I will look into it

nurey:


here are what is the cause of the engine maintenance light

HI nurey,
Can you help with next step about my car,Fx 35.

Scan code are.
P0340
U1001
P1574
P0057
P0328
P0463

Any nissan specialist within mainland ?

HeavenlyBang:


Yes, they're rare. So I just bought an X. The RWD models are faster btw, since they're lighter, but I think I prefer not having my car squirm around when I gun it and it kicks down from 2nd to 3rd.

Despite my wife's car being an X, on WOT, it flashes it's SLIP and tries to squirm abit with slight tyre squeal. Yet it's AWD works very very well and so does the ABS and skid control.

kingreign:

Despite my wife's car being an X, on WOT, it flashes it's SLIP and tries to squirm abit with slight tyre squeal. Yet it's AWD works very very well and so does the ABS and skid control.

Same as mine. Wonder how much worse it'd be on the RWD models.

monopolistic:

Scan code are.
P0340
U1001
P1574
P0057
P0328
P0463

With these codes, it may well be, as Autologic has suggested (in your post in another thread), that your vehicle has a CAN (i.e., electrical) issue. Apart from the ECM, your vehicle has a number of other modules controlling the transmission, airbag, ABS, meter & a/c amp, IPDM, Intelligent key, etc. Apparently, the only module you have scanned is the ECM. Of the codes you have listed, the key code here is the electrical U1001. It suggests that the ECM is in conflict with another module (open or shorted harness connection). Three of your codes P0340 (camshaft sensor b1); P0057 (rear oxygen sensor b2), and P0328 (knock sensor) are primarily controlled by the ECM while P0463 (the fuel gauge sensor) and P1574 intelligent cruise control vehicle speed sensor) are jointly controlled by the ECM and the meter and a/c amp. It seems to me then that your problem is the meter & a/c amp (located on top of the audio unit in the dashboard). If the amp is scanned you’d probably pull U1000 (not U1001) or even B2202. I could be wrong and the direction could, in fact, be to another module. So here’s my advice: use a scanner capable of running through all the modules in your car. Any resulting U code(s) will point to which other module(s) that should be checked. You could also check all the fuses in the vehicle especially those in the IPDM in the engine bay and the fuse block inside the vehicle. As for the other three codes (P0340, P0057, and P0328) they play little or no role in your present predicament.

monopolistic:



HI
Can you help with next step about my car,Fx 35.

Scan code are.
P0340
U1001
P1574
P0057
P0328
P0463

Any nissan specialist within mainland ?

Had to re scan again and it added more code

BCM 013e 04a8
ABS c1143 , c1156, c1131

Finally COnfused.

Also i noticed black smoke coming out of the Exhaust and the sound of the revive is different..Now once it start it goes into static mode then off and the gear woun't shift.

Thinking of changing the plugs and fuel pump ,

Please can you recommend nissan versa hatchback 2005 as a first car?

monopolistic:


Had to re scan again and it added more code

BCM 013e 04a8
ABS c1143 , c1156, c1131

Finally COnfused.

Also i noticed black smoke coming out of the Exhaust and the sound of the revive is different..Now once it start it goes into static mode then off and the gear woun't shift.

Thinking of changing the plugs and fuel pump ,

Your BCM codes are undecipherable. Check again. The ABS codes relate to the steering angle sensor. All that's probably needed is a recalibration of the sensor. I'd be more interested in a U code (Uxxxx). For the moment, your intention to change plugs and the fuel pump is not advisable.

Costee:

Your BCM codes are undecipherable. Check again. The ABS codes relate to the steering angle sensor. All that's probably needed is a recalibration of the sensor. I'd be more interested in a U code (Uxxxx). For the moment, your intention to change plugs and the fuel pump is not advisable.

THEN WHAT IS ADVISABLE SIR?

monopolistic:


THEN WHAT IS ADVISABLE SIR?

Check out your meter & a/c amp.

Costee:

Check out your meter & a/c amp.

Thank You

Like I said, the major culprit if your car l, is the positive cable adapter, some lines are broken causing CAN failure. Replace or rebuild that adaptor making sure all return cables are well inserted and firm.

The bank 1 camshaft sensor needs replaced too, this will cause the car to crank long before starting or never start. Kindly shift to manual mode and see if it displays 5 instead of 1 on the instruments screen but if you have CAN failure, the instruments screen will not display anything.

The black smoke you see is because the car running very rich, which implies high amount of fuel is being dumped in the cylinders. Stop revving the car until all problems solved. The A/F sensor needs attention to fix this.

Still like I said, the major problem here is Positive Cable Adaptor, it is broken causing CAN failure and black out to the BCM.

Keep me updated for more inquiry.

Thank you,Am taken note and working on all advise.

Shalom

Infiniti whatsapp group.

Do we create one or not?

kingreign:
Infiniti whatsapp group.

Do we create one or not?

creating one is a good idea if and only if it won't affect gathering of information in this thread. Also know that NL will have more information always available than WhatsApp

nurey:


creating one is a good idea if and only if it won't affect gathering of information in this thread. Also know that NL will have more information always available than WhatsApp

Not always the case.

Club Lexus and Mercedes Benz group on whatsapp has better resources and quicker response than here.