mctfopt:


Picked the one I bought in February last week.

It means I should keep hope alive then Because am yet to receive orders placed in feb

mank1234:


Though I'm not using it, I read that MK does combined charging too and also can combined both utility and solar for load if solar is not enough.

Please confirm if GK can combine utility and solar to power load as well?

I love the high voltage of GK.

I have gone to look at the mk manual again and yes it does combined charging just like GK and even throws more cumulative amps than GK but I still prefer GK especially when comparing the 3kva of both series. The high VOC is sure a good and bad thing with the GK, it's good when you are able to get sufficient Panels array to ensure early wake up and late sleep.
Yes the GK does load source combination as well.

360w flame solar panel now available, #48000. Call/WhatsApp us on 08168986461.

https:///2348168986461?text=

Back view of the 360w flame solar panel.


Call/WhatsApp us on 08168986461.

200Ah 12v safepower battery is available, #120000. Call/WhatsApp us on 08168986461

https:///2348168986461?text=

EMMATECH solar battery just landed. Both 100ah and 200ah. #40000 (100ah,12v) and #80000 (200ah,12v). Call/WhatsApp us on 08168986461.



https:///2348168986461?text=

10mm dual core cable available, #1200 per metre. Cal/WhatsApp us on 08168986461

ceaser:


Lucky you baba. Me I still dey waiting mode till God knows when.

ojeysky:


It means I should keep hope alive then Because am yet to receive orders placed in feb

Weirdly enough I opened dispute and won. Tried to reach seller when I got the product and store is no longer in existence

justcallmenuel:
EMMATECH solar battery just landed. Both 100ah and 200ah. #40000 (100ah,12v) and #80000 (200ah,12v). Call/WhatsApp us on 08168986461.



https:///2348168986461?text=

Chairman is this one your brand

justcallmenuel:
10mm dual core cable available, #1200 per metre. Cal/WhatsApp us on 08168986461

What's the guage (AWG) and voltage max written on it?

mctfopt:






Weirdly enough I opened dispute and won. Tried to reach seller when I got the product and store is no longer in existence

Woah. I hope seller isn't one of the mortalities of covid in China.

ceaser:


Woah. I hope seller isn't one of the mortalities of covid in China.

Some Chinese close down their shop due to bad reviews only to open another with another name. AE doesn't care. If you do that in places like Amazon, you may be blacklisted.

I have a Schneider sw4048 Inverter/Charger and Schneider charge controller 60/150 used for a few months.

Going for a good price.

07033311179

ojeysky:



Chairman is this one your brand



What's the guage (AWG) and voltage max written on it?

Yes boss, and is a very good battery sir.

Can you share the specs of the battery?

justcallmenuel:

Yes boss, and is a very good battery sir.

justcallmenuel:
360w flame solar panel now available, #48000. Call/WhatsApp us on 08168986461.

https:///2348168986461?text=

Please what is the meaning of the Half-Cut stated on the panel.

justcallmenuel:
10mm dual core cable available, #1200 per metre. Cal/WhatsApp us on 08168986461

Can i use this wire for (2) 360w Flames panel u advertised please advice

spartacus11:


Can i use this wire for (2) 360w Flames panel u advertised please advice

Using this size of wire for stated installation is a gross overkill.

You have to provide your system details like nomimal voltage (12V vs 24V), distance of panels from CC, type of CC (PWM vs MPPT) to get a reliable response.

Cheers!

ClickSis:


Using this size of wire for stated installation is a gross overkill.

You have to provide your system details like nomimal voltage (12V vs 24V), distance of panels from CC, type of CC (PWM vs MPPT) to get a reliable response.

Cheers!

Makeskyblue MPPT 40A or 60A
Distance 16 yards or 15 meters it can be less but not more

12v or 24v it can be either

spartacus11:

Makeskyblue MPPT 40A or 60A
Distance 16 yards or 15 meters it can be less but not more

12v or 24v it can be either

See the chart provided. A 10mm wire will carry the amps supply of the panels even if you parallel them with no issues at all.

ojeysky:


Yes o, I have a rough idea of what happened to the first Board, would avoid it in future.

What do you think happened to it?

spartacus11:

Makeskyblue MPPT 40A or 60A
Distance 16 yards or 15 meters it can be less but not more

12v or 24v it can be either

For 12V system (panels in parallel), the 10mm is the required cable

For 24V system (panels in series), even a 4mm cable can serve. But use 6mm

Both cases are at 5% loss

Cheers

mcTrinity:


For 12V system (panels in parallel), the 10mm is the required cable

For 24V system (panels in series), even a 4mm cable can serve. But use 6mm

Both cases are at 5% loss

Cheers

Connecting the panels in series (provided there will not be a challenge from shades) will considerably reduce the wire size since he's using an MPPT CC.

Just to mention also that 6mm is about half the cost of 10mm

Good morning all, pls help me make a decision. I am planning to get 600W monocrystalline solar panel latest next week as soon as the inter-state lockdown is lifted.

I have a 24V system with an in-built charge controller whose maximum solar array is 600W and based on my research, I have narrowed down my choice to two products :

1. 3 numbers of 200W Yinglin or
2. 2 numbers of 300W Canadian solar panel

Pls advice on the better choice, thanks in anticipation.

anjilgreat:
Good morning all, pls help me make a decision. I am planning to get 600W monocrystalline solar panel latest next week as soon as the inter-state lockdown is lifted.

I have a 24V system with an in-built charge controller whose maximum solar array is 600W and based on my research, I have narrowed down my choice to two products :

1. 3 numbers of 200W Yinglin or
2. 2 numbers of 300W Canadian solar panel

Pls advice on the better choice, thanks in anticipation.

Option 2....

Cheers

mcTrinity:


Option 2....

Cheers

Thanks!

essegis:


See the chart provided. A 10mm wire will carry the amps supply of the panels even if you parallel them with no issues at all.

Thanks for the feedback

I need epever display for configuration or the bluetooth app.

mcTrinity:


For 12V system (panels in parallel), the 10mm is the required cable

For 24V system (panels in series), even a 4mm cable can serve. But use 6mm

Both cases are at 5% loss

Cheers

Thanks a lot.

I have a question
Parallel (More Amps)
Series (More Volts)

What is the advantages of having lesser Amp with more Volts (Panel Series) connection

And what is also the advantages of having more Amps with lets Volts (Panel Parallel) connection

Or they are actually no different if i am using MPPT charge controller

Throw some insight on it please

CC essegis ClickSis

spartacus11:


Thanks a lot.

I have a question
Parallel (More Amps)
Series (More Volts)

What is the advantages of having lesser Amp with more Volts (Panel Series) connection

And what is also the advantages of having more Amps with lets Volts (Panel Parallel) connection

Or they are actually no different if i am using MPPT charge controller

Throw some insight on it please

CC essegis ,mctrinity

At higher volts..smaller current flows tru the cable...and vice versa....so sending at higher volts enables you use thinner wire..

Same principle why nepa transmits at high tension/voltage, we have 33,000volts, and higher for the national grid.this way immense amount of power is transmitted at negligible losses at extremely high voltages, which is now gradually stepped down at
or close to consumption areas.
Those giant pylons carry 132,000volts if not higher

Morning star 60amps pwm cc cost 198 dollars, same morning star 60amps mppt cost 600usd.
The Pwm operates at about 60v max.
The Mppt operates at 150v max.
The extra 400usd in cost is basically cos of this flexibilty in max input viltage

For solar calculations, using 3% loss and lower is a preffered optimal design factor than 5%

Oshomo12:


What do you think happened to it?

I activated an hour long double 29.4v equalisation with 30min interval on an LFP, so I guess the BMS surged at some point and that affected the inverter. At that time, I didn't know an LFP does not need equalisation(a rapid one for that matter). That's my rough guess on what may have happened.

earthrealm:


At higher volts..smaller current flows tru the cable...and vice versa....so sending at higher volts enables you use thinner wire..

Same principle why nepa transmits at high tension/voltage, we have 33,000volts, and higher for the national grid.this way immense amount of power is transmitted at negligible losses at extremely high voltages, which is now gradually stepped down at
or close to consumption areas.
Those giant pylons carry 132,000volts if not higher

Morning star 60amps pwm cc cost 198 dollars, same morning star 60amps mppt cost 600usd.
The Pwm operates at about 60v max.
The Mppt operates at 150v max.
The extra 400usd in cost is basically cos of this flexibilty in max input viltage

For solar calculations, using 3% loss and lower is a preffered optimal design factor than 5%

A+

Little by little we go