bassdow:


yea.

Would / should work on any ChargeController that has such Load point wether na PWM or MPPT.

Also, mind you, that load-Port on chargeController ain't exactly 12-Volts Ooo. It's rating is often based on battery voltage Oooo.
for instance, that same load-Port giving you voltage of 12-volts, could equally give you 24-volts or 48-volts according to the battery voltage system.

Also, would suggest you don't plug heavy appliance on that chargeController load-Port so as not to endanger your chargeController.
I love that port because anything connected there, can't drain the battery beyond a responsible level. na there my Laptops dey 100% of the time.

Wao!
But ur laptop is not 12v/24v/...,
How did the port charge ur laptop without an Inverter to the load port?

I saw a video of someone connected his 12v DC pressing iron to the load port of his MPPT controller, can I do same on my POWMR 60a?

amicdan:
Hi bro, what’s the cost of the CC?

106k on jumia

Hero2t:

Yes, it is. Please connect the inverter directly to the battery head.

Thanks

I Just got my "POWMR" CC yesterday.
I have a 100ah battery connected to 24v pv and a pmw CC.
With a Ups connected connected to the load port of pmw.

But the new POWMR 60a said I should not connect inverter to the cc, that it can damage the Cc. Is it right?

JoeSef0:
It's a DC pressing iron
It's to be connected directly to the battery not inverter

Thanks

Pls, does this iron what buying and worth using on this inverter

Pls, can this inverter give me rest of mind

Valto:
no be small thing when i say most of the popular brand in Nigerian market are fake capacity and also used grade C cells, they will say i am a marketer and attack me. hope una de see am

Na wa o!

Congrat to u if u see this message.

Is POWMR CC available?

I have 26e Primary and 42e Secondary, After i relocate, my 42e is showing WAP TV, JALLA TV. But not showing TVC NEWS, CHANNELS TV.
What do i do to be able to watch TVC, MBC channels & others, should my 42e LNB go up a little or shift down a little.

Ease by rmoloruntoba: 7:09pm On Dec 06
My setup is an APC UPS, PWM charge controller with maintenance free 100Ah battery(just 3month old) with Solar.

1. My neighbor always bring his rechargeable touch light, is it safe ?

2. Can I use Christmas lights on the setup?

3. I want to travel for two weeks this Christmas, is it safe to disconnect it from solar, or I should leave my bulbs switch ON while I travel. I don't want sulphation to happen to my battery

My setup is an APC UPS, PWM charge controller with maintenance free 100Ah battery(just 3month old) with Solar.

1. My neighbor always bring his rechargeable touch light, is it safe ?

2. Can I use Christmas lights on the setup?

3. I want to travel for two weeks this Christmas, is it safe to disconnect it from solar, or I should leave my bulbs switch ON while I travel. I don't want sulphation to happen to my battery

saint2ace:



None, they're all the same. They'll be dead this time next year.....

Kai!!
Thanks
But Money na hm wan do ojoro

Penuelseun:
Yes, you can use lifepo4 with this

Thanks
(1) What's the maximum Ah of lifepo4 that I can use and likely cost

Plz which will you advice me to get among all these 100Ah battery

Maximum power,
Gbm,
Sunfit,
Sun tech,
Rubitec

My setup is
a 270w panel(24v),
A 210Ah used battery(doesn't last 30min on 50watt load again) ,
Pmw Roysolar CK30DU charge controller(I will later upgrade to mppt) ,
An APC UPS .

1) Can I use lithium with this or I should just go for 100Ah battery ?

I did my setup a year 4month ago with
a 270w panel,
A 210Ah used battery ,
Pmw charge controller ,
An APC UPS .

I do use it for my 30watt TV, decoder and light for about a year, It use to serve me for about 5hrs daily.
But now I only use it to charge our phones in the house about 4month ago till now.
1) can it power my TV and decoder when the sun is shining?
2) can pulse repair bring my battery to life if I buy one as this battery is a slim "FLAMM monolite 12 FiT 210" looking that the battery was produce in 2012?

oviecardealer:
estimate 1.4m

Wao! Cars don cost o

How much does it cost to land Honda Crv 2001

After a long time, I put on my Qsat 26g, it came up with LOAD and off again. if I remove the signal cable from the dish, it will power On perfectly, but if I put the signal cable it will off. What is wrong?

Pls how can I turn my CONSAT decoder to FTA?

adubam:


See this.

Thank you but my primary lnb is 26e while your own primary is 42e. Using 26e as primary , can I add 68.5e on the 90cm dish

Is it possible to add Christian station(68e) to my setup or is not possible? I have 26e as primary on 90cm consat dish in lokoja. I added 28e, 33e and 42e. If u have, pls send me ur picture

Pls I have 26e as primary on consat 90com. Is it possible to add 68.5e to it

Has anyone been able to add Christian station(68e) to my setup or is not possible? I have 26e as primary on 90cm consat dish in lokoja. I added 28e, 33e and 42e. If u have, pls send me ur picture

Hi

Has anyone been able to add Christian station(68e) to my setup or is not possible? I have 26e as primary on 90cm consat dish in lokoja. I added 28e, 33e and 42e. If u have, pls send me ur picture

Pls, are other channels like 1990 added to MBC channels still working?

On 26e, as at 2days ago, all channels are working. But as I try to use my second disec with the primary disec so as to use the 5th LNB tonight, I discover that channels like ABC, NEWDAY are not showing, saying bad signal but MBC channels are working. Is it general ?

After my relocation to another house, I have 26e as primary, I have 28 & 32e on top. I want to add nigcomsat on 90cm dish. I got Some few channels like Turksat promo, Mvb. Am I close to nigcomsat?