[quote author=KingRex1 post=89039051]

I really dont know how @thecommunist gets his own to work. My is new, less than a month now but doesn't cool to my taste. I use the original tec stabilizer of 40k sef. Had the installer and vendor to come take a look at it and they confirmed it's ok.

I guess yours is as ineffective too and it displays the room temperature.
I would have just gone for the normal Panasonic ac

Yes bro it is not o. Just regretting as well.

[quote author=pair36 post=89010977]I don't trust haier thermocool inverter ac anymore. I will never make that mistake to buy their inverter ac nor will I advise anyone to. I bought inverter ac last month March. My God it was a terrible mistake. It has exactly the same fault you are describing. It stays at 33°C after 6hrs. Tried everything for where. The dealers sef were confused and they couldn't tell why. I just jejely returned it after 1 week.
So my brother, try everything you want it won't cool. I believe it's a factory problem [b][/b]

My brother am even regretting as well. Imagine putting on Ac from 5pm to 7am yet i slept without wearing any cloth in my body not even using duvet.

I want to buy this LG dualcool abi na gencool. Do you know anything about it.?

Which Ac are you using now and how is it working?

[quote author=dake40 post=89007226]

Someone adviced me to buy Panasonic over of LG gencool, even if you buy the gencool, you'd still need a stabilizer if your voltage isn't regulated ....

I got a 1.5hp Panasonic and 5k watts stab and I'm falling in love with it... Currently using it in my 1 bedroom apartment, At 16 temperature, I'm almost freezed and I can feel it in every room and corner....

That's good. Is the Panasonic inverter or normal Ac?

[quote author=Collinsade369 post=88999529] yes ooo my brother, you are correct. The gen mode should be used on generators.
But as a Nigeria man living in Nigeria, man has to adapt .
My area has low current most times I noticed the gen mode works for low current at 173+ but anything bellow 170 the useless ac goes off and disgrace it self lol ;

Are using yours with stabiliser. Because mine does not strip off even when the light current is 120+ cos of the stab am using just that am not enjoying that kind cooling compare to the 1hp royal ac i was using before.

[quote author=Collinsade369 post=88999309]

When the ac is on, lift your hands close to the ac.
Once you press the turbo button once, instantly you will feel the ac cooling better.
The turbo button should be pressed just once.

And pls on your remote put it to the lowest (16) before you press the TURBO BUTTON.

don't worry abt the display on small screen on your ac, that one shows the room temperature.

I will be waiting for your reply to see how it goes

Hi bro, have done like you said and there is a bit improvement gradually. But honestly it not as compact cool like my previous 1hp royal ac.

Now temperature on the small screen is showing 31, I doubt if it will ever reach the 16 as in the remote?

[quote author=Collinsade369 post=88999529] yes ooo my brother, you are correct. The gen mode should be used on generators.
But as a Nigeria man living in Nigeria, man has to adapt .
My area has low current most times I noticed the gen mode works for low current at 173+ but anything bellow 170 the useless ac goes off and disgrace it self lol ;

Tnx for your response my brother. Am thinking of buying this LG DUALCOOL inverter too for another room.

Do you have any idea on how good is it?

[quote author=Collinsade369 post=88983117]Wow..! I use the same ac.
There is a button on the remote TURBO, just press it.
It will cool 2 x faster.

And let me be truthful with you, low current can't carry the ac.
Once the light is on 170v, my ac trips off
Some times I have to even put it on gen pal mode and off turbo, just to enjoy the ac

You mean I can use the genpal mode on nepa ligt?

I thought the genpal mode was only meant for generator and I understand it has L1,L2 ,L3.

How do you off the turbo? Thank you

[quote author=Collinsade369 post=88983117]Wow..! I use the same ac.
There is a button on the remote TURBO, just press it.
It will cool 2 x faster.

And let me be truthful with you, low current can't carry the ac.
Once the light is on 170v, my ac trips off
Some times I have to even put it on gen pal mode and off turbo, just to enjoy the ac

Thanks so much on this response. Should press the turbo twice or just once to for it to cool faster.

[quote author=Limahgirl post=88560048][/quote]

Hi, any update on your Ac now, is working perfectly okay(cooling as desired)

[quote author=KingRex1 post=88659565]
Bought mine at 138k. But to be fair bro, it doesn't cool so much as expected. It does a pretty good job but not as mad as expected.

Bro please whats the update on your thermocool genpal Ac, is it cooling well enough as it supposed. Cos mine is not cooling even when i set the temperature to 16 on the remote and fan speed at maximum instead the Ac will be reflecting another different temperature on the body.

[quote author=Tbioty post=88971458]Do I also need to get a bigger stabiliser.. maybe this one currently use is not giving it more power as required

@thecommunist please any idea?

[quote author=suco01 post=88973667]


How much did u get this your Qasa AVR

18k

[quote author=thecommunist post=88971492] it is supposed to go as low as 16.

Are you using stabiliser on yours?

[quote author=thecommunist post=88971492] it is supposed to go as low as 16.

I have press it. In the remote is on 16. But on the Ac once it show the 16 it will fluctuates back to the temperature on display on the Ac.
Normally it suppose to reflect 16 on the Ac to correspond with the remote. Infact the temperature showing on the Ac was like 33 it decrease by itself to this 28 as per attached picture. While the remote is still showing 16.

[quote author=xiaomimoney post=88971337]The remote needs to respond with the indoor unit. If you can get it to 16,it will start cooling. Or call your installer to explain how the remote works.

Thank you. I appreciate your assistance.

Do I also need to get a bigger stabiliser.. maybe this one currently use is not giving it more power as required

[quote author=thecommunist post=88971120]the remote is same as mine. is the brass hose just cool or freezing?

Also, do i need to press the gen mode when am not using it on generator. I understand the gen mode has three levels. L1, L3 & L3. I guess the gen mode does implies when using normal power supply. @thecommunist

[quote author=thecommunist post=88971120]the remote is same as mine. is the brass hose just cool or freezing?

Is not freezing just normal cool.

Please i have question, in my remote i set the temperature to 16 but is not showing on the indoor unit instead is showing 28 as per attached picture.

My former Ac once you press the temperature on the remote either increasing or decreasing it will definitely show on the Ac.

[quote author=favor2016 post=88971067]Have you removed and cleaned the filter before? If yes, your light might be low to power it

I was wondering since is an inverter Ac according to them is should not need plenty light to power it.

[quote author=favor2016 post=88971032]Have you removed and cleaned the filter before?

Is a new Ac, just bought yesterday.

The remote is responding and have done reset. I believe that 33 is showing on the indoor unit was the room temperature then. Because now is showing 28 while in the remote is still showing 16.

[quote author=xiaomimoney post=88970288]Press the Gen Mode to change the Mode. Just make sure it stays on 16 .

Is still on 16 on the remote. I thought the gen mode is use when is on generator only.

[quote author=thecommunist post=88968125]this your type is quite different from mine.are you sure it is an inverter AC. in any case, put it on and go outside the outdoor unit and check if the brass hose for the gas is freezing on one side or just having condensate only.

Have check the outdoor unit as recommended, the brass hose for the gas is cool on one side.

Please can i see picture of your own, i just hope they have not sold something different for me.

See my remote. Hope is the same as yours.

xiaomimoney:
Just change the 33 to the lowest number. should be 16,17 or 18. Leave it for 30 minutes.

Have done that, but is still showing the 33. But the remote is showing 16. It quite confusing. I don't know if there is anyone using the same Ac.

Hey guys please did anyone have ideas on how to set the this genpal inverter Ac to cool. U don't really understand it. I bought this Ac on Monday and i was thinking it will be super and fast cooling. Even my royal 1hp ac cool more than this. I don't know if there a setting on the remote am not getting.
This Ac is not suppose to consumed too much of power since is inverter but am even using stabiliser with it yet am getting the maximum cooling.

Please any technician with an idea should help me out. Thank you.

thecommunist:
i recently purchased a 1.5 hp thermocool QDC genpal and i must say it hasnt dissapointed . i use it every night for 10 hours with my 2.2 generator. i dont know much about the LG gencool tho

I purchased the same air conditioner but mine is not cooling. It take a more time for the Ac to pick when you turn it on. Even when you set them temperature to 16 degrees Celsius on the Ac it will be showing 33 degrees. You said yours is cooling pls how can i make my mine to be as cool as yours. Am even using it with a stabiliser

thecommunist:
make sure you set the fan speed to maximum and set the mode to cool. And temperature to 16.

Hi please how do i set the fan speed?

thecommunist:
i recently purchased a 1.5 hp thermocool QDC genpal and i must say it hasnt dissapointed . i use it every night for 10 hours with my 2.2 generator. i dont know much about the LG gencool tho

Goodevening pls i just bought the same Ac on Monday but is not cooling, I don't know if is because of the setting on the remote. Pls how can i set mine to cold as yours.
This my WhatsApp number - 08066034525

Am even using it with a stabiliser.

[color=#000099][/color]contact me (08066034525)on whatapp for your sure football weekend bets ....especially six fold bet dat will fetch sum cool cash...

Mikel was not cooking for is galfren...does chicks re presenter for ebonylife Tv..dey is program on dat tv.which is call WITH MIKEL..showing evry Saturday by 8pm in channel 165...