₦airaland Forum

Hello Sir,
Do you need concrete mixer recently?

Kind regards
TERRY

MANGAM:
I really need a concrete mixer urgently for purchase. Anybody wit info regarding cost and where to get a good one?

Hello Jerry,
Do you want simple concrete mixer?

Best regards
Terry Lin
Email: terrylin@wztianyuan.com
Wenzhou Tianyuan Machinery Co.,Ltd

Hello Sir,
Do you still need concrete mixer, pls contact with us.

Best regards
TERRY LIN
Email: terrylin@wztianyuan.com

It is my intention to buy a concrete mixer and a brick making machine.

Then pay a laborer to make the bricks under supervision.

At the end of thd project sell the equipments.

It won't work for everybody though.

Hello Sir,
We are Wire Drawing Machinery Factory from China since 1986.
There are wire descaling machine, wire drawing machine, cold drawing machine will suit your requirments.

Best regards
TERRY LIN
Email:terrylin@wztianyuan.com
Wenzhou Tianyuan Machinery Co.,Ltd

agbus:
An indigenous steel company which was incorporated in 1985 as a private limited liability company for the purpose of processing steel wire coils into assorted drawn, annealed or galvanized steel wire products located on 10,354.55 square metres(over 22 plots of land) of fenced-in land at new owerri industrial layout. The factory proper is marked by an array of wire drawing and ancillary equipment, control systems for the drawing, annealing and galvanizing plants. Some of these factory equipments are: EOT Crane 3000kg, EOT Crane -2000kg, wire hanger B23, parking's generating set 500KVA, galvanizing wire hanger, was electrical panels, rusting generating set 75KVA, tensile tester machine, wire drawing machine BSC 1, galvanizing plant(lead basin), retching and cutting machine, wire drawing machine BSC5, eather machine(small size), galvanizing machine(acid bucket), galvanizing machine (finishing drum), wire pointing machine, welding machine, polishing machine, wire drawing machine BSC3, scalier etc.
Contact me for more information
08035060204

Hello Sir,
Do you need concrete mixer recently?
We are China Factory.

Best regards
TRERY
Email: terrylin@wztianyuan.com

BITSWORKS:
Work on site was a bit hectic yesterday and that's the reason I didn't have time to post an update. The demolished building foundation on site had to be dug out and the site grub and cleared to make it easy for the pile boring machine. Also sharp sand was delivered to site and the iron benders are working more efficiently so more reinforcement rings have been produced.

Today's work was a bit relieving, the concrete mixer was delivered to site this morning in preparation for the casting of the bored pile points. Also, the entrance slab collapsed when granite was delivered to site on Monday and it's being worked on. The drainage has been excavated and the side reinforcement have been put in place. Tomorrow the wood form-work will be done and casting of the slab will take place.

Hello Sir,
DO you need Concrete Mixer?

Regards
Terry
Email: terrylin@wztianyuan.com

segun1976:
The floor was done in a full day.

Challenges with the omo-onile as usual to collect one levy or the other. The concrete mixer broke down, rain came down ......, but we remain undaunted.

Hello Sri,
We are concrete mixer factory in China.
If interested, pls contact back.

Regards
TERRY
Email: terrylin@wztianyuan.com

saniby:
show Pic and were is it located. I'm interested.

Hello Sir,
What kind of concrete mixer do you need? Pan mixer or Portable mixer?

Kind regards
TERRY LIN
Email: terrylin@wztianyuan.com

GoodJ:
How much is the concrete mixer. State if fairly used or direct tokonbu[b][/b]

Hello Sir,
We are manufacturer of concrete mixer from China.
If needed, pls contact back.

Regards
TERRY
Email: terrylin@wztianyuan.com

iqquod:
Below for sale. Was bought to power a concrete mixer machine but never used. Negotiable!!

Hello Sir,
Do you still need concrete mixer. We are manufacturer from China.

Kind regards
Terry

earthrealm:
new to th e thread, sorry to take us back, but i have a question

Using concrete mixer for the foundation of a 1 storey building, is it really important/critical?

Hello Sir,
Do you sale concrete mixer?

Regards
TERRY

Kesmakveli:
mobile concrete mixer still up for sale

Hello Sir,
Do you need concrete mixer recently?
We are manufacturer from Wenzhou, China.
Pls feel free to contact with us.

Best regards
TERRY LIN
Email:terrylin@wztianyuan.com

kino47:
please who has an idea how much it cost to rent concrete mixer for a day and how is the contract like do the people that comes with the mixer will be included in the bill and how much will it cost.
location lagos

Hello Sir,
Do you need concrete mixer recently?

mavverick:
Do you also do like residential buildings, as this particular pictures shows what appears to be a mobile concrete mixer pouring concrete. Was this for a commercial build ?

If you do residential buildings, do you have a list of your past clients that one can speak to for verification and would you be able to show us what you have done in the past ?

Any mention of qualifications ?

What would you require to be able to provide a quotation for a complete electrical wiring for a block of 6 flats ?

Thanks.

Hello Sir,
Do you need concrete mixer lately?

Goodhouse:
You can rent the following material handling equipment
Cranes (Wheel, crawlers, all-terrain, mobile etc.)
Forklift including telescopic variants
Hiab
Swamp buggy
etc.


You can rent the following earthmoving equipment
Dozers
Backhoe Loader
Graders
Excavators
Dumpers
Tippers
Compactor

You can rent the following General Purpose Equipment
Generator (From as low as 2.5Kva to as high as 500Kva)
Welding machines
Towing vehicles
Portacabin
Concrete mixer
Scaffoldings
Empty intermodal containers

Call: 08180136383, 08030716105, 08168668899

Best seller in Nigeria, Concerete Mixing Machine/Concrete Mixer/Cement Mixing Machine/Cement Mixer, Do not hesitate to contact with us.
1- We have endurable quality
2- We have reasonable price
3- We have shipping comppany
4- We have Soncap Certificate
5- We have fast delivery time
6- We have easy after sale servie
Link: https://www.nairaland.com/2733698/concrete-cement-mixing-machine

Best regards
Terry Lin
Email: terrylin@wztianyuan.com

Just Coming back from Indonesia

As we all know, Wires (steel, aluminum,copper) are used in many industries. Wires can be made into spring, screw, nut, etc. Today let us see how this works out:

1- First, you will need to get the raw material.

2- Second, you will need to clean the surface of the wire if it is oxidised. It is called wire descaling machine. It has two parts: the main body and the vacuum. It has 4 highlighted features:
1) Anlike the traditional descaling machines, our newly developed one has got high productivity. It reduces the working process, as well as the production cycle, and saves the cost of production.
2) Anlike the traditional descaling machines, our newly developed one can make the surface clean and bright. And after processing, the wire can resist rust for as long as 6 months.
3) Simple operation. It has got long lifetime, simple to operate, adjust and maintain.
4) Environmental friendly. This is the most import point. It does not cost acid, water or coal to clen the wire, and does no harm to the employee's health.
Pls see the link for our newly developed descaling machine: http://v.youku.com/v_show/id_XMTM2ODA2MzkxMg==.html?from=y1.7-1.2
3- Third, you will need to drawing the wire into the diameter you want, so that it can be processed at the next stage. Generally speaking, we recommend two Models for drawing wire.
1) The WL series wire drawing machine: It has got two blocks in one body, can draw the wire at the same time, pls see the link: http://v.youku.com/v_show/id_XNjA3MzE4Mjcy.html?from=y1.7-1.2
2) The DLI/550-1500 wire drawing machine: It possesses both functions of wire drawing and wire coiling. The wire is drawn and then automatically coiled into the carrier below. Pls see the link: http://v.youku.com/v_show/id_XNTczMTE1NjIw.html?from=y1.7-1.2
4- Fourth, you will need to cut the machine into the length you want. We usually suggest Our TZJ1-18 wire straightening and cutting machine is with simple operation and easy maintence. Pls see the link: http://v.youku.com/v_show/id_XNTczMTE1ODE2.html?from=y1.7-1.2
This is how we can get the wire to the expected diameter and length.
For more information about metalworking machinery, pls kindly contact us by Email: terrylin@wztianyuan.com

Best regards
Terry Lin
Sales Director
Skype: terry0501258
Video: i.youku.com/wztianyuan
Email: terrylin@wztianyuan.com
Wenzhou Tianyuan Machinery Co.,Ltd
Web: http://www.aliexpress.com/store/1802712

Hello Sirs and Madams in Nigeria,
We are very glad to meet you here.
Pls allow me: We are Wire Drawing Machinery manufacturer since 1986 located in Wenzhou, China.
Here we have two project solutions for you:
1- Elements needed to establish a standard fastener manufacturing factory, like nuts, screws, nails, bolts, washers etc.

2- Elements needed to save material of steel wire coil for building construction companies

Pls click the links to download the PDF files, any questions, pls feel free to contact with us.

Construction PDF:
http://www.my9ja.com/news/users/ffh/download.php?file=f2a6c6870a26a3e49e3b2cc3f48795b1
Fasteners PDF:
http://www.my9ja.com/news/users/ffh/download.php?file=dd931218b153e943e6e73f40c5a0a557
Machine SPECS:
http://www.my9ja.com/news/users/ffh/download.php?file=9cb35391629e0fc5ca929cbc1090517d

Best regards
Terry Lin
Web: www.wztianyuan.com
Email: terrylin@wztianyuan.com
Video: i.youku.com/wztianyuan
Wenzhou Tianyuan Machinery Co.,Ltd.
Web: http://www.aliexpress.com/store/1802712