₦airaland Forum

Ibukun2k15:
Calibration, that's a different ball game, you will need another of the same device to recalibrate. If not the flash tool would not know where is which.

Thanks a whole lot 2k as I got my phone fixed. Pls I need another help. . How do I backup this current rom. Backed it up with custom twrp but it seems not to appear in zip format. Is the twrp backup flashable? If so how. And how can I backup in zip form so I can flash through sp flash tools? Thanks bro.

CarlcareOpebi:
You're welcome. @princefemo1

Got my tecno w3 and its working again. Thanks much.

A quick one. My 32gb memory card doesn't seem to be compatible with this marshmallow os. Any file I copy to the sd card always ends up corrupted. I dont know if you could recommend a solution as I discovered its not only my w3 that has the problem.

CarlcareOpebi:
If your phone is without any physical damage & under warranty, it will be fixed for free. @Tigris007 Our engineer will be on-ground to check, for any other issues. If you haven't already. Visit any of our centres from Next week.

Thanks a lot. I do appreciate.

.... ...wetin dey find you

Ibukun2k15:
If you're using sp flash tool, you need to format everything including the boot loader, then flash again.

I just did so again but still the same dram fail error. Though I observed that the preloader beginning address is 000000 all through compared to other fkashable partitions. Seems it has to do with calibration. .... Any ideas?

princefemo01:
it cannot power on also....but when I got to clacare center .some people had thesame issue and it was resolved though u have to come back a week later...

How much does carlcare charge ? Thanks for your reply

Ibukun2k15:
If you're using sp flash tool, you need to format everything including the boot loader, then flash again.

Thanks bro, would give it a try.

DonRaphTech:
You can use the steps that i used to unbrick a bricked tecno w4 to tml[/url]

Thanks but you seem not to have read my post. I know all these. An error keeps coming up when I want to flash/download stock rom. Sft dram fail on sp flash tools. I need tecno w3 stock rom HA1........v96 or higher

Hello engineers in the house, I bricked my tecno w3 accidentally. Pls I need a working stock rom HA1.......v96 or higher. Can anybody be of help?

Good day guys (et ladies) in the house. I currently have a hard bricked tecno w3 on my hands.
It was initially soft-bricked but I downloaded a stock rom to flash it all over a again. It was going smoothly until NEPA jana.(bad battery).

I have tried reviving it.
It still makes sound when connected to p.c.
I have all the drivers and a stock rom.
But when it is about to begin flashing the rom, it says s-ft dram-fail. (Check that your load matches the destination)



Seems the phone wants the exact firmware: the original firmware is HA1.........v96 but I could find HB1...... I thought every w3 is the same and the build number should not matter. Otisumii .

pls does anyone have HA1........v96 or above till v103