 Science/Technology / Re: Homebuilt Radio Control Airplane by Tommyclancy(m): 9:44pm On Jan 06, 2016 |
CAN I HAVE THIS MATERIALS DELIVER TO ME IN OGUN STATE ESC,TX AND RX,BRUSHLESS MOTOR,GRYO,HELI BLADE,ROTOR HEAD,SWASHPLATE,SERVO. |
| Science/Technology / Re: Homebuilt Radio controlled Helicopter by Tommyclancy(m): 5:56pm On Jan 06, 2016 |
hi,my name tomiwa olatunji a.k.a tommyclancy i am also involved in making rc projects,i have also built sum project like heil,airplane,boat,cars e.t.c.but due my location and lack of money am not able to complete it and make it work.pls if u can help let me knw.here re sum pix of it. 
|
| Science/Technology / Re: Homebuilt Radio controlled Helicopter by Tommyclancy(m): 2:42pm On Oct 16, 2015 |
My nam is tomiwa am buildin a rc heli al i nid is servo esc gryo tx rx nd swashplate |
| Science/Technology / Re: Homebuilt Radio controlled Helicopter by Tommyclancy(m): 2:28pm On Oct 16, 2015 |
Pakingzzz:
My name is Kingsley Obinna, Aka Pakingzzz.
A student of Michael Opkara University of Agriculture. Currently studying Mathematics.... Enough of the introduction about me...
CONTACT DETAILS.
07015387845
email: kingsleyobinna26@yahoo.com
I am currently bulding a homebuilt radio control helicopter...]The helicopter weighs 950grams including the battery.
One problem most people often have,trying to building a pratical model helicopter is: the ability to get certain critical parts....
I want to show them how to bypass that.
If you want to bypass my method,then you must have some sound idea about design ideas,design theories,design problems,mechanics,fabrication and having an idea of material structural strength.
[/color]
In my design,i am using a model Airhogs bluesky airplane Tx and Rx.
The Tx is a 2.4ghz,and has a micro camera embedded in the receiver.. According to the manual,it could take up to 100 pictures and a 5 minute length video.
The Tx functions just like a mode 2 Tx,where the throttle is on the left and aileron is on the right.
Each joystick has one axis of movement(an unusable feature for heli control). So i disoldered it and replaced it with a Playstation joystick. I did this that i can have a joystick with 2 axis .
This airhog Rx was built to drive a micro motor that ran at 3.2v,and drew 1amps.
I wanted it to drive a motor that draws about 15amps at 12v with it. I knew this impossible without destroying the mosfet in the Rx.
I simply built an amplifier to amplify the 3.2v to 12v,and the current as well.
I also buit a little Bec for the Rx.
At first,when i connected the Rx to the Bec,it wouldn't pair with the Tx. I suspected there where alot of interference coming from the main motor,and disturbing the reception. I soldered a diode to the output of the Bec and the problem was solved.
THE MAIN BLADES
I built the helicopter blades, from a strip of baton board or ceiling batton stick,(i dont know what you call yours).
It was hand carved. You have to have a ton of patience doing this,and love it as well.
Mind you,these batons are unsymmetrical in their dispersion of weight. You would have to balance your blades statically and dynamically,else your heli will never fly.
As with the blade, all other parts are mostly custom built.
The construction of the blade holder or rotor head,was done,using light aluminuim sheets.
If you have any question,you can do so here,or contact me via my email kingsleyobinna26@yahoo.com 
|
