Introduction

The deoiling machine is made of 304 stainless steel. Mainly used for fruit and vegetable processing industry fruits and vegetables, the food industry in the food cleaning after blanching dehydration and drying.This machine is suitable for units or individuals that require dehydration or oil removal.Completely replaced the bitter and tired of manual work, the machine is efficient and easy to use.It saves time and manpower

Working principle

The deoiling machine centrifugal Movement as its working principle of the motor-driven high-speed rotation of the inner tank. The moisture in the dehumidifying material splashes under high-speed rotation to achieve dehydration.

Machine structure

(1) The deoiling machine is a rubber shockproof type, due to the unbalanced load in the drum, the vibration of the foot can be avoided when running.

(2) The shell is made of stainless steel plate，

(3) The base plate material is cast iron, the outlet pipe is located on the side of the barrel, the base and the column foot material is cast iron.

(4) The spindle is made of stainless steel and is equipped with two bearings

(5) The deoiling machine adopts the time controller to control the working time, can be set freely according to the raw material dehydration time.

Technical parameter



Name Model Size Weight Power Capacity



Deoiling machine

SL-400 1000*500*700mm 360kg 1.1kw 300kg
SL-500 1100*600*750mm 380kg 1.5kw 400kg
SL-600 1200*700*750mm 420jg 2.2kw 500kg
SL-800 1400*900*800mm 480kg 3kw 700kg

http://www.peanuts-machine.com/deoiling-machine.html
Email:jerryzhangshuliy@gmail.com

Nowadays, the continuous development of science and technology in our country, the continuous improvement of technology, industry they all widely used mechanical operation, convenient and quick, greatly saves manpower, today we speak of peanut harvester, simply refers to finish digging in the process of the peanut harvest fruit, separation of mud, shop, pick up, picking fruit, cleaning and so on a work of mechanical harvesting the crops, the specific what are the benefits do the peanut harvester, today small make up to take you to look at:

1 peanut harvester is one of the convenient agricultural machinery tools, mainly when the peanut is ripe for harvesting, can be combined with the use of agricultural tractors in coordination, not only can be planed after picking peanuts, but also can be crushed, the collection of peanuts fruit, peanut harvest mechanization operation. Compared with the traditional time-consuming and laborious collection work, peanut harvester can greatly reduce labor intensity and save labor costs.

2. The harvesting parts of the peanut harvester swing forward, and the working resistance is small, reducing the power consumption of the unit.

3. The structure of peanut harvester is simple, the operation procedure is very easy to learn, and the price is low. We have a large area of peanut planting, if the harvest of peanuts to hire workers is a great expense, not only to dig workers, but also need to manually crush and select peanuts, this is a very large workload, it takes a long time to work, peanut harvester can complete a series of labor process.

4. Reverse parallelogram equiangular swing mechanism is adopted by peanut harvester to integrate the digging and separation of two parts of peanut harvester.

http://www.peanuts-machine.com/peanut-harvesting-machine.html
Email:jerryzhangshuliy@gmail.com

Introduction:

This peanut sieving machine adopts four-layer folding structure, which can automatically load four kinds of peanuts (including half-petals) at one time, and then change the sieve to achieve the desired screening purpose. It absorbs the advantages of similar products at home and abroad, and has the characteristics of compact structure, high efficiency, low cost, convenient and reliable use. It is applicable to selected peanuts, with a single selection to achieve accurate grading standards.

Application:

This peanut sieving machine is suitable for all kinds of peanut, almond, pine nut, and other granular food.



Working process:

Peanut sieving machine can grade different sizes into three levels or more levels, which is convenient for storage and sales. It consists of one, two and three vibrating screens or more. It can be screened at the same time. The sieves of the movable sieve are 6–10 mm. The sieves are replaced according to different varieties, and the qualified size is divided. it is the most ideal nuclear processing equipment.

Features:

High capacity
Grader accurately by one time.
Low breakage rate and reasonable design.
Technical data:

Model SL-2 SL-3
Power 0.75KW 1.1kw
Capacity 500kg/h 800kg/h
power 1.1KW 1.1kw
Voltage 380V 50HZ 380,50HZ
Size 2.4*0.8*1.4M 2.4*0.8*1.6M
weight 260kg 300kg


http://www.peanuts-machine.com/peanut-sieving-machine.html
Email:jerryzhangshuliy@gmail.com

Put peanut butter into mixing,vacuum and storage tank, then add various seasonings. After the agitation of the rotor of mixing,vacuum and storage tank, the flavor of peanut butter can be stirred more evenly, and it is suitable for mixing and stirring different materials, and can also be used for heat preservation in this process.

Application

Widely used in pharmaceuticals, building materials, chemical pigments, resins, food, scientific research and other industries.

Advantage

1, stainless steel material, complete functions, reasonable equipment

2, structure design, advanced technology,

3, simple operation and save manpower

Parameters



Model Power Water pump Size
SL-M1 2.2KW 0.55 KW 500L Φ1000×1700


SL-V2 2.2kw 2.2kw 500L Φ1000×2580


SL-S3 / 200L 600*650*600MM


http://www.peanuts-machine.com/mixingvacuum-and-storage-tank-for-peanut-butter-introduction.html
Email:jerryzhangshuliy@gmail.com

Peanut shelling machine is a professional equipment for peanut shelling. It combines peanut shelling and shell kernel separation. It has the characteristics of simple structure, convenient operation, low power consumption and low noise. It is popular among peanuts. . The emergence of the peanut shelling machine has brought the gospel to many farmers, because there is a layer of outer skin that needs to be removed from the peanuts, but because the peanuts are small, they can only be peeled off one by one without any machine, thus causing The efficiency of production is very low, so the emergence of Peanut shelling machine has helped many farmers friends.

1. After the machine is in normal operation, the peanuts are quantitatively, uniformly and continuously put into the hopper. The peanut shell is broken under the repeated impact, friction and collision of the rotor.



2. Peanut kernels and broken peanut shells are screened through a screen with a certain aperture under the rotating wind pressure and blow of the rotor. At this time, the peanut shell and the pellet are subjected to the blowing force of the rotating fan, and the light-weight peanut shell is blown out of the machine body, and the peanut grain is filtered through the sieve to achieve the purpose of cleaning.

3. When using the Peanut shelling machine, there are certain requirements for peanuts. The peanuts that need to be treated should not be too dry, otherwise the particles will be damaged. Before putting them in, you can soak the peanuts and water them. Then it can handle peanuts very well. Not only does it increase production, but it also saves time and effort. Peanut shelling machine is simple to manufacture, suitable for long-term use, and easy to shell, so it is the choice of peanut production.

Our company has 20 years of experience in the production of Peanut shelling machine>, able to provide customers with quality products and attentive service. If you are interested, please pay attention to our website.

http://www.peanuts-machine.com/peanut-shelling-machine-wanted.html
Email:jerryzhangshuliy@gmail.com

Hello, please leave your whatsapp and email if necessary, we will contact you in time.

The peanut sheller is conveyed by a V-belt. After the belt is used for a period of time, it will gradually elongate and appear slack due to the pulling force. Therefore, it is necessary to regularly check the tension of each belt and the clearance of each mating part. Make adjustments.

The soaking sequence and time of the peanut peeling machine. The relationship between soaking sequence and time is a technical hub of the process. Practice shows that the optimal soaking sequence and time are: first cold soak for 30 minutes, then hot soak for 2~4 minutes, at this time the peanuts, inside and outside the heat, The overall water is saturated, and the epidermis is thermally expanded, tending to fall off, and is easily peeled off.

http://www.peanuts-machine.com/peanut-sheller.html
Email:jerryzhangshuliy@gmail.com

1.function

Chaff cutter machine is mainly used for cutting various fresh hays and straws, which can be used for animal husbandry feed and stalk returning. It is a good helper for farmers and useful to raise livestock by processing grass.

2.Classification

（1）According to the different sizes, chaff cutter can be divided into small, medium and large.

（2）Due to the different cutting parts,chaff cutter has hob type and wheel type (also called disc type).

（3）Chaff cutter machine can be classified into fixed and mobile type according to different fixing ways as well.Small chaff cutter generally uses hob-cut components and is mostly fixed.


http://www.agriculture-machine.com/small-chaff-cutter/
Email:jerryzhangshuliy@gmail.com

Application:
1. This chaff cutter and grain crusher is a new type of feed processing machine which combines chopping， rubbing, crushing and beating.
2. Chaff cutter and grain crusher not only can smash dry or green corn stalks, sorghum stalks, peanut vine, sweet potato pods, various pastures but also can crush grain,corn for feeding animals,which is favorable for improving the digestion and absorption of straw for animals.

Matched Power:
Concerning the power ,chaff cutter and grain crusher can be made with motor ,diesel engine or gasoline so that the machine can be used in place which is short of electricity
Chaff-Cutter-and-Grain-Crusher2-1Chaff-Cutter-and-Grain-Crusher3-1
Model TY-B
Power 3kw motor or gasoline engine
Rotating speed 2800r/min
Capacity 500kg/h for crushing grains , 1500kg/h for silage700kg/h for dry straw
Weight 98 kg
Size 1200*1060*1000 mm

http://www.agriculture-machine.com/chaff-cutter-and-grain-crusher-2/
Email:jerryzhangshuliy@gmail.com

Application:
1.The big thresher is applied to rice, wheat, beans, sorghum, millet
2. With high capacity of 1000kg/h , the big rice thresher is very popular in India ,we supply more than 10000 pcs to India every year .

Main Structure :
1.This big rice thresher has reasonable design ,it can be convenient to move with the casters
2.The big rice thresher is easy to operate. The discharge port is equipped with a powerful blower and vibrating screen which further blows out impurities while filtering kernels that is pretty clean.
Big-Thresher-for-rice-wheat-beans-sorghum-millet2Big-Thresher-for-rice-wheat-beans-sorghum-millet3
Model SL-125
Raw material Rice wheat beans sorghum millet
Power 3kw motor
Engine Gasoline engine or 12Hp diesel engine
Capacity 800-1000kg/h
Weight 400kg
Size 1340*2030*1380

http://www.agriculture-machine.com/big-thresher-for-rice-wheat-beans-sorghum-millet/
Email:jerryzhangshuliy@gmail.com

1. Normal wear caused by long-time use of Small Chaff Cutter engine or abnormal wear caused by improper maintenance will increase fuel consumption.

2. The diesel engine is difficult to start, the exhaust pipe has obvious blue smoke, and the breathing apparatus has serious oil injection. The torsion spring of the inner support inside the oil ring is disconnected at the opening position of the oil ring, resulting in unclean oil scraping and participating in combustion and oil consumption

3. Check the front end of the oil shell side of the Small Chaff Cutter on the same side of the driving wheel. Due to the loose screw of the base, the driving wheel will rub against the Angle iron of the frame protecting the oil shell for a long time under the pull of the triangular belt, and the oil shell will be worn through to form a gap, resulting in oil leakage.

4. Check whether there is oil leakage at the joints of the Small Chaff Cutter body, the gear chamber cover, the plate on the side of the wheel, the back cover, the cover cover and so on.

5. Pay attention to observe whether the sealing gasket of each connection part is complete, and cut grass machine excessive to replace the damaged sealing gasket.

The above is my opinion on the fuel consumption of Small Chaff Cutter. If you are interested, please continue to follow our website

http://www.agriculture-machine.com/small-chaff-cutter-consumes-oil/
Email:jerryzhangshuliy@gmail.com

Please pay attention to our website:http://www.agriculture-machine.com/6-row-rice-transplanter/
Or send me an email:jerryzhangshuliy@gmail.com

Please pay attention to our website:http://www.agriculture-machine.com/kenaf-decorticator/
Or send me an email:jerryzhangshuliy@gmail.com

Please pay attention to our website:http://www.agriculture-machine.com/rice-milling-plant-machine/
Or send me an email:jerryzhangshuliy@gmail.com

Insufficient spray pressure of the sprayer, poor atomization: If the water ball valve is lifted by the dirt, the inlet valve can be removed and the dirt can be removed with a cloth; if the cup is damaged, the new cup can be replaced; If the seal is installed, or the seal is damaged due to damage to the seal, the seal can be added or replaced.
The sprayer does not spray fog: if the inclined hole of the nozzle body is blocked by dirt, the oblique hole can be dredged; if the cleaning nozzle hole can be disassembled due to the nozzle hole blockage, the hard object hole such as wire or copper needle can not be used to prevent the hole Enlargement, the quality of the spray is deteriorated; if the filter in the casing is clogged or the ball of the over-water valve is put up, the filter should be cleaned and the dirt on the ball should be cleaned.

The sprayer switch leaks or does not move: If the switch cap is not tightened, tighten the switch cap; if the washer on the switch core wears, replace the washer; the switch does not move, because it is placed for a long time, or used for too long, The switch core is adhered by the etch of the agent, and the parts should be removed for cleaning in kerosene or diesel oil; when it is difficult to remove, it can be immersed in kerosene for a period of time, and then removed and removed, and hard objects cannot be used.
Leakage at each joint of the sprayer: If the joint is loose, tighten the nut; if the washer is not flattened or damaged, the washer should be flattened or the gasket replaced; if the gasket is hardened by shrinkage, it can be soaked in animal oil before it is softened. use.

http://www.agriculture-machine.com/sprayer/
Email:jerryzhangshuliy@gmail.com

Paddy cleaning – essential for removing unwanted foreign matter, rice cleaning is important to ensure proper operation of the rice mill; the coarse rice passes through a series of sieves and provides a closed-circuit suction system to remove dust by positive suction Light impurities.

Undesirable materials pass through a slag remover/gravity separator than coarse meters (but similar in size). This machine works according to the principle of specific gravity. Stones and other heavier impurities are heavier and remain on the surface of the screen, while rough rice is lighter and flows to a positive air gradient created by an external source.

The rice husking-streamlined rice stream is directed into a pair of rubber rolls that rotate in opposite directions at different speeds. The horizontal inward pressure on the corrugating roller is pneumatically applied. Due to the difference in rotating seeds, shear forces are generated on the surface of the hull (both sides of the rubber are rubber rollers), destroying the surface/hull. The lower specific gravity shell is then separated from the brown rice by a closed circuit suction system.

This process causes breakage of brown rice. Although proper horizontal inward pressure is an important factor in crushing or rice, the efficiency of shelling is equally important and should be maintained between 75% and 85%.

The rice-separated rice surface is smoother than the rough rice surface. This difference in surface texture is used to separate brown rice from brown rice by a rice separator. A smooth textured grain surface with a high width is removed along with precise sized red particles.

Whitening Rice – Rubbing with a rough surface made of sand with a specific grid size. The rough corundum removes the brown bran layer. The radial speed of the stone wheel, the grid size of the stone, the gap between the stone surface and the other stencils, and the external pressure of the outlet chamber of the whitening machine determine the degree of whiteness. If pneumatically transported to a separate room for further processing/storage, the bran layer is removed from the surface.

Rice polished – the surface of the white rice is still rough and polished by a humidified rice polishing machine. This process involves rubbing the rice noodles with another rice surface with a mysterious air between the two faces as a lubricant. Usually a modified version of this process is used to create an ultra-fine silk-like finish on the rice surface.

Rice Grading – The rice is removed from the entire rice by a cylindrical indentation screen that rotates at a specific speed. The broken/small particles embedded in the indentations of the rotating cylinder are lifted by centrifugal force, and gravity drops the particles into the grooves. Adjusting the rotation speed and angle of the groove can change the average length of the grain.

The beige sorting-beige sorter removes the variegated rice grains from the colored grain. A photosensor/CCD (Charge Coupled Device) sensor generates a voltage signal when observing the color-changing particles, and then removes it by air jet generated by the solenoid valve.

http://www.agriculture-machine.com/rice-milling-plant-machine/
Email:jerryzhangshuliy@gmail.com

In the process of using the rice milling machine, the staff will find its advantages and disadvantages will be many, so let’s talk about the disadvantages of rice milling machine, if you want to understand, then please with the editor to understand!
1. Gravity affects the centrifugal acceleration of rice grains, making a difference between the upper and lower parts of the whitening chamber, affecting the evenness of whitening degree;

2. The number of rice knives is small and the material is hard. Some of them are not easy to adjust.

3. Bran is easy to accumulate in the upper part of the whitening chamber;

4. Manual repair is required after screw groove abrasion, and the quality is different for different people. The sand roller is a combination of $35, which cannot be adjusted or partially replaced after abrasion, and the maintenance cost is high.

These are the disadvantages of rice milling machines. If you are interested, please stay tuned to our website

http://www.agriculture-machine.com/rice-mill/
Email:jerryzhangshuliy@gmail.com

When the plastic granulator in the operation of the plastic granulator has a poor drying condition, what aspects should be used to find the problem and solve it in a targeted manner? Longyue granulator manufacturers here are some suggestions for everyone.
First check the dryer of the plastic granulator. Pay particular attention to air filters and hoses. A blocked filter or a flattened hose can reduce airflow and affect the operation of the dryer. Damaged filters can also contaminate the desiccant and inhibit its ability to absorb moisture. The ruptured hose can introduce humid ambient air into the dry air stream, causing premature moisture absorption and high dew point of the desiccant, poorly insulated hoses and Dry silos also affect the granulator drying temperature.

If the material does not dry properly after it has come out of the dryer, check that the drying chamber has enough space to provide adequate and effective drying time. If Kerry does not have enough drying time in the silo, it should pay attention to the size and shape of the pellets or crushed materials, which will affect the bulk density and residence time of the dry materials.
Dew point readings can also help to identify problems. The dew point reading of the dryer during normal operation should be a straight line in the range of 20oF to 50oF. Of course, small fluctuations caused by the replacement of the desiccant are normal. If the dryer is operating normally, the dew point at the dry air inlet should be at least 30oF below the dew point at the return air outlet. On the other hand, if the dew point immediately peaks after replacing the desiccant, it indicates that the desiccant is not sufficiently cooled before it is placed, so that it does not adsorb moisture well, and the dew point of the desiccant will fall to the normal standard after cooling.

http://www.plastic-machines.org/how-to-deal-with-the-drying-situation-of-plastic-granulator.html
Email:jerryzhangshuliy@gmail.com

Plastic granulator manufacturers teach you how to identify plastic
Plastics are products that are very familiar to us in our daily lives. They are made of synthetic or natural polymer compounds. There are many kinds of plastics. Because of their different compositions, their properties are different. Some plastics are not toxic and can be made into food packaging. Some plastics are toxic. It is harmful to people to pack or package foods and beverages. Healthy body.

So how do we correctly distinguish which kind of plastic products we encounter in our life? The manufacturer of plastic granulators will explain this to you.
There is usually a triangular mark on the bottom of the plastic article, and an Arabic number in the middle of the triangle, from “1” to “6”, each number representing a plastic. This number (or letter) is internationally versatile. Regardless of domestic and foreign plastic products, we can see the number (or letter) in the triangle to know which plastic is made and how it is used.
The number 1 plastic is made of various beverage bottles. The number 5 is light and non-toxic, and can be made into containers, plastic bags, and film to hold food. The number 6 is pure and transparent, and can be made into a disposable plastic lunch box, instant noodle bowl, and the like. Other figures of plastics are non-edible standards and are generally used in industry.

http://www.plastic-machines.org/
Email:jerryzhangshuliy@gmail.com

Broken material can not be directly injected? Look for a granulator.
For many friends, the broken materials will be more troublesome for recycling and processing. Can the broken material be directly injected? Xiaobian tells you: the broken material can be directly injected, but it is not recommended, why? Because the broken material is not uniform due to the uneven size of the particles and the gap, the density of the melted rubber is not the same, which tends to cause uneven feeding during the storage process, which makes the process unstable, resulting in an increase in the defective rate. Of course, if the product requirements are not high, you can use the broken material.

Broken material can not be directly injected? Then you need to find a waste plastic granulator. What are the benefits of a granulator?
1. The granulated granules are uniform, the cutting is stable, the gap is the same, the melt density is consistent, and the difficulty of adjusting the machine before injection is reduced;
2. From the perspective of the impurity of the material, some impurities are difficult to enter the material after passing through the filter after granulation, which is relatively clean, and the crushed material is not;
3. From the color point of view, the color of the waste plastic granulator is relatively uniform after granulation, while the color powder or color master often has uneven color or uneven dispersion, it is difficult to clean the hopper or the barrel, and the granulation material is easier to clean. ;
4. In terms of material quality, some plasticizers, diffusing agents, grafting, etc. are often added during granulation, so that the material quality is guaranteed;
5. From the aspect of material modification, several different materials are uniformly mixed after being mixed by twin-screw in a small amount of grafting, and the production is relatively stable.


http://www.plastic-machines.org/pet-bottle-recycling-production-line
Email:jerryzhangshuliy@gmail.com

In some hills and mountains, because the amount of silage corn cannot meet the silage requirements of local dairy farms, we can choose to make some wheat silage. For example, summer storage and storage of wheat silage is a good choice.

Advantages of wheat silage:
Improve the use of silage equipment such as automatic silage balers
Because of the silage production, the silage can be harvested in the early stage of wheat, which also helps to spread the corn in the summer, which is high temperature and high humidity pollination period, effectively improve the corn firmness and reduce the amount of weeds in the farmland.

The use of automatic silage baler for wheat silage can effectively reduce the return of straw to the field and reduce the cost of straw burning and straw treatment.

But wheat silage also has disadvantages:

First of all, the nutritional value of wheat silage is slightly lower, generally only about 75% of the nutritional value of corn silage. The nutritional value of better wheat silage is only about 90% of the nutritional value of silage. And the dry matter production per mu of wheat silage is low, about 700kg/mu.

When using the automatic silage baler for wheat silage, we should carry out silage at 33% and 40% of dry matter. At present, some areas in China have been directly crushed in the field, and the silage processing operations are carried out directly in the fields.

http://www.agriculture-machine.com/automatic-silage-baler-for-making-wheat-silage/
Email:jerryzhangshuliy@gmail.com

When maintaining the automatic silage baler, we need to pay attention to the following aspects that need our customers’ attention: the first detailed connection is dull and dry, not let it rain, or put water on it. tool.

Secondly, we should regularly carry out the necessary inspection and nursed back to the various parts of the automatic silage baling machine every month. It is necessary to check the transmission parts and the cylinder environment, and carefully carry out the environment where the screws of the various components are loose. Check it out.

Finally, it is necessary to carry out regular liquidation of the automatic silage baler, and the remaining straw is cleared. In the time of liquidation of the straw baler, the first power outage should be taken to ensure the quietness of the man-machine, and the straw baler should be wiped clean with a clean rag. The automatic silage baler should not be scratched, and the straw baler should be used frequently. The use of lubricants for lubrication and maintenance is a transmission system for straw balers. This maintenance should be held regularly.

The automatic silage baler is the most basic and most widely used packaging equipment deployment, but blindly changing and not innovating will only make the market more boring, can not bring strange and high-tech elements, so innovation The vitality is also crucial to the growth of the automatic silage baler industry.

http://www.agriculture-machine.com/automatic-silage-baler-maintenance-precautions/
Email:jerryzhangshuliy@gmail.com

The straw chaff cutter belongs to a multi-purpose fresh straw stalking machine, a dry straw chaff cutter, a hoe storage chaff cutter, a corn hoe chaff cutter, and the like, and is a chaff cutter that is professionally researched by farmers. For the farmers to solve the problem of straw waste during feeding, the chaff cutter is basically used to act on crop straws, which are treated with corn stalks, wheat straw, straw and other crops, and are mechanically crushed by smashing, cutting, etc. Feed processing equipment for livestock, cattle, sheep, horses and deer feed.

Whenever we reach the season of harvesting, corn stalks, peanut stalks, and other crop stalks are a headache for farmers’ friends. Since the emergence of chaff cutter, our crop stalks have appeared. The nemesis solves the problem of nowhere to stack. The chaff cutter tells that these crop straws are cut into the same length and are used by our animal husbandry industry, such as cattle, sheep and pigs, as feces.

http://www.agriculture-machine.com/small-chaff-cutter/
Email:jerryzhangshuliy@gmail.com

1. Repair and replacement of the screen. The screen is made of sheet steel or iron perforated. When the screen is worn or broken by foreign matter, if the damage is not large, it can be repaired by riveting or soldering; if the area is damaged, the new screen should be replaced. When installing the screen, the burr side of the screen should be facing inward, the glossy side facing outward, and the screen and screen frame should be tightly attached. When the ring screen is installed, the lap joint of the lap should be in the direction of rotation to prevent the material from getting stuck at the lap joint.



Second, the lubrication and replacement of the bearings. The corn grinder is cleaned after every 300 hours of operation. If the bearing is oil lubricated, it is advisable to fill the bearing housing clearance by 1/3 when adding new oil, and the maximum is not more than 1/2. Just tighten the capped oil cup cover a little before operation. When the corn grinder bearing is seriously worn or damaged, it should be replaced in time, and pay attention to strengthen lubrication; if using tapered roller bearing, pay attention to check the axial spacing of the bearing to keep it 0.2-0.4 mm. If there is discomfort, increase it. Reduce the paper pad at the bearing cover to adjust.

Third, the replacement of the claws and hammers. Among the pulverizing parts, the pulverizing claws and the hammer pieces are the wearing parts in the corn grinder, and are also the main components affecting the pulverizing quality and productivity. The pulverizing claws and the hammer pieces should be replaced in time after being worn. When the jaw crusher replaces the claws, the disc should be pulled out first. Before pulling out, first open the round nut lock piece on the back of the disc, use a hook wrench to unscrew the round nut, and then pull the disc out with a special puller. In order to ensure the balance of the rotor operation, it is necessary to pay attention to the complete set of replacement when changing the teeth. After the replacement, static balance test should be done to make the corn grinder work stable. Be sure to tighten the nut when assembling the jaws, and be careful not to miss the spring washer. The qualified parts should be selected when changing the teeth. The weight difference of the single teeth should be no more than 1.0-1.5 grams.

http://www.agriculture-machine.com/common-repair-and-replacement-points-for-corn-grinder/
Email:jerryzhangshuliy@gmail.com

Product detials:

Brush peeling and washing machine is cleaned with a brush and equipped with a rotating brush with high-pressure spray. The cleaning effect is good and the stain on the surface of fruits and vegetables can be thoroughly cleaned.



Product application:

Brush peeling and washing machine for peeling and washing of taro skin,cassava skin, Potato skin, etc. Very clean and easy to operate , can keep the integrality and smoothness of vegetables.very suitable for vegetable industry or restaurant !

Brush peeling and washing machineBrush peeling and washing machineBrush peeling and washing machine


Features:

The machine is made of high quality. Stainless steel, clean and hygienic, can be customized according to customer requirements.
The brush roller material has been treated by special process, durable, good wear resistance,
The machine has beautiful appearance, large peeling and washingcapacity, high efficiency, low energy consumption, etc.


Product parameters:

Model Dimension(mm) Weight Power Capacity
TZ800 1580*850*800 180kg 1.1kw 700kg/h
TZ1000 1780*850*800 220kg 1.5kw 1000kg/h
TZ1200 1980*850*800 240kg 1.5kw 1200kg/h
TZ1500 2280*850*800 260kg 2.2kw 1500kg/h
TZ1800 2580*850*800 280kg 2.2kw 1800kg/h
TZ2000 2780*850*800 320kg 3kw 2000kg/h
TZ2600 3400*850*800 600kg 4kw 3000kg/h


http://www.potatochipprocessing.com/brush-peeling-and-washing-machine.html
Email:jerryzhangshuliy@gmail.com

Hello, please contact us if necessary.Email:jerryzhangshuliy@gmail.com

Hello, please contact us if necessary.Email:jerryzhangshuliy@gmail.com

Hello, please contact us if necessary.Email:jerryzhangshuliy@gmail.com