Trek4000's Posts
Nairaland Forum › Trek4000's Profile › Trek4000's Posts
How can I attach Two C band lnb' to my motorised 2.4m dish one with fibre plate and one without? If possible pictures would be helpful so I also see the positions of the Lnb skew. |
Thanks to all you guru' that helped me with the likes of Lunsat,illish,Pidzo,etcwest and all I have managed to nail Astra 2b man it feels good. Hats off to you guys. |
Strong has introduced another Mpeg4 free to air decorder which according to them is as good as the 4930 its just that its purely free to air its being called the srt 4920. Try and check it out. |
etcwest: @trek4000 am in luanshya & am able 2det multi tv with 80% qualty.i t seems d beem ends in th copperbelt. Ask lunsat if hs able 2get it u wil get it too.But etcwest can you just give me an idea on the exact position for this bird is it that the dish is raised up when moving from Eutelsat36A/B or is it lowered and secondly what's the size of the dish you're using Coz I was trying using a 1.8m dish? |
Lunsat can you confirm that I can get Astra 2f on 28 degrees in kafue, etcwest says he is able to get it with 80% picture quality in Luanshya. |
Hi Guru' out there I'm trying to nail Astra 2F on 28degree East so I get Multi tv but in futility, I have managed Eutelsat 36A/B and also 16 and 17degree East satellites but for this its a hard nut to crack. Any help will be appreciated. I'm in Lusaka,Zambia. |
Whats the best method to use when trying to capture satellites using the C-band? this i ask because i have a 2.4m Mesh dish which i want to set up and when i think of the work that is involved i develop cold feet,more to that i will be motorizing it.Any advise will be appreciated like which are the three pillar satellite if i should call them that for setting the furthermost west,east and overhead satellites. I'm in Zambia southern Africa so that should be in mind when advising me.Thanks in advance to all javascript:void(0); |
Pidzo I need your email address as we are in the same region. I have three satellite dishes,90cm,120cm and 240cm.my email is trekmwansa@gmail.com |
Does anyone know where i can get updates for the sumsung smart TV UA32EH5300? |
anyone with a strong srt4930 decoder for sell can contact me on trekmwansa@gmail.com i need it like yesterday ![]() |
I need a strong hd srt4930 decoder if anyone has one get in touch.I need it like yesterday. |
Im saying hi to all you guys out there,but i have a question arising from the fact that my Strong srt4930 just got hammered by Lightening so iam thinking of getting the Strong srt4940 but iam woundering if it allows card sharing.Has anyone out there tried it. ![]() |
Hi guys,can anyone help me with a clue on how I can get the keys for Zap on eutelsat 36A and 36B on 36degrees east. |
Guys I need your assistance,my Strong srt 4930 sometimes freezes whilest watching Mytv dispite still being valied or payed up. |
thanks ilish i owe you one Guys |
Lunsat thanks for the lesson i will try it and give you a feed back |
ilish i'm in Central Province in this new District Called Itezhi-tezhi. |
Lunsat,Pidzo or King411 can you Guyz pliz help me align my 2.4 m dish i have only managed to get intelsat 906 C with no other satellite in the arc.I'm in Zambia and i will really appreciate your help. |
Guys i just blind scanned my decorder on intelsat 906 C and found that there is a new channel for Sport called sport 24 it looks good.Try it |
ilish i need your assistance i dont know on weather you had seen my post earlier on but i have a 2.4m dish and i have problems setting it in the arc so i only have Tz on intelsat 906 C band how should i go about it?Equally inform me which satellite to start with and how to proceed. |
ilish what birds are you able to nail and were about in zambia are you? |
Pidzo i need your assistance on how best to align my 2.4m Dish into the arc i have just managed to get intelsat 906 were there is Tanzania,i also had citizen from Kenya but its now gone.Obnelly tried to help but i felled so i tend to think that since you are closer or were in the same region so most likely what you can get i can also get.Try and give me a step by step instruction of which satellite to start with and probably how my Lnb' should be positioned. Its an abuse of a 2.4m motorised Dish to only be able to get 1 satellite. ![]()
|
Hi there guys iam able to watch You Tube using my Decorder but it buffer alot and this irritates me,can you guys advise me how best to do this though my plans are to watch DSTV with it. Advise |
Hi People i need more information on watching Satellite Television using Internet iam currently able to watch You Tube using my Decorder but i buffers alot and this iritates me .Any Help out there will be appreciated. |
i would like to thank Pidzo and Kungu for responding to my post,but tell me something are you guys using a 1.8m dish or what coz all these channels are really apart. ![]() Another thing is that i have just downloaded the new update for the strong SRT 4930 the 123 what exactly is it working on. |
Pidzo what movie channels are you able to capture and on which satellites?iam in zambia and trust that what ever you get i might as well capture most likely. ![]() |
Iam equally using a Strong 4930 HD and as for the dish sizes i'm using a 90cm which is pointed at the bird intelsat 7/10ku,then i have a 1.8m dish pointing Arabsat 5A and lastly i have a 2.4m Dish which is pointing either 906 or 902 C this dish is motorised though i have a problem of aligning it in the arc. |
Pidzo what type of decorder and size of dish do you use?And what satellites are you monitoring. |
Adetayo100 its actually adding a motor to your dish so that you are able to move it from the comfort of your seat. |
what would be your best time so that i dont squeeze you on the time. |
Obnelly its seems we keep missing each other can we talk at say 19hrs GMT.Confirm if possible on my Gmail account. |
Happy New Year to everyone out there,Can anyone out there Help me on which Satellite i can Capture FX free to Air |
so that should be in mind when advising me.Thanks in advance to all javascript:void(0);