₦airaland Forum

Come in for a suitable design.

Come one, come all.

Here we are, delivery is no issue.

Ourown:
I am looking to build a 3 bedroom retirement home in Kwara State this coming new year. My problem is I am in the diaspora and don't know how to go about engaging a trusted professional to oversee the project. I am also don't want to engage family members on ground for this project.

Please advice me guys.

How do I hire trusted contractors that will deliver quality work and not drain me with inflated quotes.

Thanks

Well, we can work together to realise something excellent.

We deliver always.

It's our job.

Here we are

Come in one

We deliver

It is

C

B

A

Thinker9:
Looking for a good painter that can paint inside a house

Whatsapp 08108984504

Where's your location?

Skydivine:
Whose area of specialty is it to install interior wall panels ? Is it Carpenter, pop guys, mason or interior decoraters?

Or does it depend on the material of the wall panel?

It depends on material so as to achieve excellent result.

Architecture and building constructional works.

It's our job. Soft work.

We are good at what we do.

ProjSynergies:
CreteShield Elastocryl is a Cementitious Solution to Damps or Capillary effects of Ground Water on walls. It’s a two component (A&B)
CRETESHIELD ELASTOMERIC SKIMCOAT is a two-component acrylic modified cementitious coating that requires only on site mixing to form the ideal product to waterproof and resurface concrete, masonry, and most other construction materials.
* Can be applied by brushes, prevent water from the positive side(external)
* Mixed with the plaster slurry, to form an integral part of the plaster(Damp walls treatment). This allows for the formation of the waterproof film within the wall components.

CreteShield Elastomeric Skimcoat cement based, two components with the crack filling capabilities, high abrasion resistant and insulating material.
USAGE AREA

-Positive insulations of the wall and grounds.

-Insulations on the concrete, plaster and alum applications.

-Balcony, terrace, swimming pools, decks, tanks, dams.

-Wet areas, shower and baths.
-Insulations of the outer curtain walls.

-Pre-cast and pre-fabricated elements, roofs.

The surface to be applied on should be certainly clean and moist, If the surface is dry, it should be moistened providing no accumulation. The oil, dust, rust or the factors reducing the adherence should be eliminated.

-Application Method
Preparation Of The Mixture
Component B (10kg) in liquid for is put into a clean and appropriate container.
Component A (20 kg) in powder constantly by means of a mixer and it is mixed slowly to prevent any agglomeration.
The mixing process takes 5 minutes for homogeneous structure. The mortar that is available to apply with a brush in homogeneous form is obtained as the result of mixing process.

For “Damp Walls”
The wall should be scarified to remove any loose sand from the wall, then the mix should be prepared as follows
*The (A) Cementitious is mixed with sand and Portland cement to get a smooth powder mix.
*The (B) Polymer Solvent should be mixed in water for slurry preparation.
The mixture achieved should be used to plaster the face of scarified wall, this allows for formation of a waterproof film within the wall structure, thus preventing rejection of paint or flaking of the screed on the wall.

-Application

CEMENTITIOUS COATINGS
brush smoothly in the directions perpendicular to application should not be made at high temperatures or frost so the morning hours or the evening time should be preferred.

well as to feature high abrasion resistance.

-The product has high adherence and features an excellent adhesive on concrete

-The product presents a good resistance against the weather conditions, UV, mechanic impacts and abrasion

Prevention remains the greatest cure.

It's our work.

We are up and doing.

Happy Sunday.

Let's get it together for you.

Come one, come all.

We are who we are.
We deliver quality at all times

gaeul:
Please for one storey building, what is the idea block for the base and top, 9/6 orn6/5...Please and thanks

Most blocks out there are not strong, if you ain't moulding, it's advisable you put columns at certain edges or corners of the building, mostly especially if you are having an in-situ concrete fascia.

Ricardo2400:
Good afternoon everyone,

I am working on renovating my family house on the mainland in Lagos.

We intend to do the following:

1) Construction of gutter
2)Floor the compound
3) Change the gate
4)check the roof for any leakages and repair

Please if you are able to execute or deal in any of the following.

Kindly send a mail to richie4google@yahoo.com or share your contact here so I can reach you.

Thank you

Email sent.

+2348108408732 call/whatsapp.

OAKGroup dey for you.

Bring your job. Let's sort it out.

We are good at what we do.
Our delivery is superb.

It's as simple as abc.

Come one, come all.
Let's get it done.