₦airaland Forum

950k let me pick up this ride.

Is the car first body? Is it engraved? What's the present condition of the car?

Many thanks.

I'll take note of that.

gambus007:
Yes, you changed timing belt...was it original timing belt or Timing kit?You made mistake of changing only timing belt whereas you were to change tensioner, Timing roller, belt itself(OEM) and waterpump(if necessary).If you get good one without electrical abuse then you are good to go.

[left][/left]
Morning guys, please I plan to get a Nigerian used Peugeot 407 (ew10 engine) for my personal use but I'm kinda scared due to my experience with my previous 406 (D9) timing belt issues before I eventually sold it off. Engine was ew10
The timing belt was actually fine but I decided to change it based on the recommended change interval and then the problem started.
Within 2 years I changed the timing belt thrice, with Al the valves getting bent which cost me some money. The car was later sold and on calling the buyer after several months (which was yesterday), he informed me he changed the timing belt and all valves recently.
I love the Peugeot but the thought of the timing belt scares me a lot due to previous experience.

Any advise?

Hi Ogunvic,

Kindly send me your t and c.
Email: walestega@yahoo.com

Thanks all. Eventually got it but yet to fix it.

@Captainking, please where can I get the spark plug non foulers in Lagos? How can I reach you please.

How much for Pontiac Vibe 2004 camera with map, and camera only

Where In abeokuta

900k serious buyer.

Bring your price down and what kinda engine does it carry?

Can you post the engine pix

800k Sir

Hello Sir.

Please how much will land me a Pontiac Vibe between 03 or 05 in lagos.

Regards

Still await your response Sir.

Many thanks.

walestega:
Good day Sir.

Please how much will land Pontiac vibe 2003 or 2005 to lagos.

Awaiting your positive response.

Good day Sir.

Please how much will land Pontiac vibe 2003 or 2005 to lagos.

Awaiting your positive response.

The answer is 30

Hi Guys,
Does anyone have materials for GHSE. I'm new to this and would really love to plan ahead as i'll be going for the ISPON's GHSE training & exam in January.
email: walestega@yahoo.com

Please can I get Camshaft Position Sensor and Crankshaft Position Sensor for 2007 Chrysler PT Cruiser.
Email me: walestega@yahoo.com

Hello Sir,

You are really doing a nice job here. I have a little concern. I have a big bros civil engineer who supervises my site for free. I'm presently done with my the foundation of my 3 Bedroom bungalow and the fear of filling is sickening as the land is sloped. I have opportunity of using the graded soil in the estate for filling my foundation but he insists it's top soil and that i should buy laterite and use for filling instead.
With my calculation, it will take up to 25-30 Man diesel trucks to fill that foundation.
Kindly advice on what to do.

Regards

abdulwastecx:
Item 8 :Filling of the foundation to required height
This is done after the completion of the foundation block and casting of foundation column( if any). the most preferable soil for foundation filling is laterite or sandy soil in area with no laterite ( south southern states like rivers and bayelsa).

after filling the foundation should be left for a period at least one week during raining season to be compacted by rain or properly wet and compacted manually with rammer of mechanically with a compactor.

Hi Ikenna,

I recently changed my front windshield and i've been having issues with automatic wiping. When the wiper is set to auto it only does a 5sec interval wiping no matter the amount of water poured on the screen.

The sensor was carefully removed when removing the old windshield and carefully placed on the new one. Attached are screenshots of the type of sensor my D9 uses and also a screenshot of the new windshield purchased.
Unluckily for me the rear windshield just broke to pieces on it's own. I have also replaced that but was unable to get a new one. The issue with this is that it did not come with the heater connector. Though, when removing the old rear windshield, i found out that the connector was glued to the screen.

Lastly, i noticed my top right engine mount (the one with double bushing) gets damaged so easily. I've had to change it twice in the past month.

Kindly advice me on the best way to resolve this issues.

Thanks for the prompt response Ikenna.

Just in case. If I find out it's trigger 1 or trigger 2, how do I fix the problem.

Will get the car scanned soonest.

Ikenna351: 1. You need a PP2000 scan to tell what the cause is. It could be permanent or intermittent fault which generic scanner wont see.

2. There is no quick fix on this until you detect the cause, which likely is trigger 1 or trigger 2 under the two front seats. You need PP2000 to find out the cause.

3. You need to erase the fault on ABS/ESP ECU with PP2000 first. I am not sure it goes off automatically.

4. I think its just your imagination. Lol!

Ikenna

Hi Ikenna,

I commend you for the wonderful job and selfless service you've been rendering to nairalanders. Gob Bless U Bro.

I'm having some issues with my 406 D9.

Firstly, when I start up my engine in the morning, and try to rev it sounds a little odd (to me) until the engine warms up. I only notice this when †̥hε̲ car engine has been off for a long period. Is this a cause for alarm?

Secondly, in the past week my air bag light was flashing intermittently and is now permanently on. Any quick fix regarding this (maybe some things I need to check before going to scan my lion?).

Thirdly, my ABS lights have been permanently on for a while. I scanned it and it complained of the passenger rear sensor which I got my mechanic to clean. However the light remains on (haven't gone back to scan it). Do I need to clear the fault with a scanner before it resets or does it clear off automatically?

I love my lion, that car is a monster on the road. I also noticed that at a speed of 110km/h it seems to move faster than other cars @ the same speed. Is it just my imagination.

Thank you.

Hi Ikenna, please my car remote (peugeot 406) doesn't work any more as the buttons are broken and I suspect the panel is also damaged. Thanks to my internal car wash (my baby girl's saliva). It's just for locking and unlocking anyways. How do I get another one? Can I get a new/used one and pair with my car?
Good Morning.

Please how much does a peugeot 406 2006 model cost. Also do cars like peugeot 505 V6 engine still exist in cotonou? If yes how much does it go for? Thanks