₦airaland Forum

...

300mm x 300mm Virony bathroom floor tiles.

...

Good morning everyone
We are making progress...

...

Lovely 600mm x 600mm Grade A China

The pillars looks intimidating

600mm x 600mm polished porcelain tiles. Thought it's a floor tiles, we are going to lay it on the pillars and the foyer.

Operation tileright!!!
We are starting with the pillars like i said before.
Tiles and Gold Cement , are here already.

Spanish Plain white Tiles.

400mm x 400mm Ceramic tiles
For kitchen and Room floors.

Bathroom floor and wall...

Delivered to Agbor, Delta State.
For a Nairalander in FloridaUSA


Thank you for believing in us.


Pix1. For other Apartments
Pix2. For masters Apartment
Pix3. Masters Bathroom Toilet
Pix4. For all counter tops.

..

600mm x 600mm polished porcelain tiles

600mm x 600mm polished porcelain

Site:Ekwulummiri Anambra State.
Client: A Nairalander

.

...

600mm x 600mm glazed porcelain tiles
Grade A+ China

Jetjacky:
Is this not sparking writeboi?

I don't understand your question

4. After installation





Ensure the tiler removes all waxes, grout and grout residue after tiling. These are sometime hard to see with the naked eye but will act to collect dirt if left, and the longer they are left the harder they will be to remove. If tiles are being sealed it is especially important that the tiles are thoroughly cleaned first, otherwise any contamination will get trapped below the sealed surface of the tiles.
Also ensure tools and other building equipments, dirt and contaminating liquids are not left on the surface of the tile while other trades are working in the area as they can stain or scratch your brand new tiled floor.

3. During installation




Ensure the tiler mixes tiles from 3 or 4 different boxes to ensure proper blending of any color variation that may exist. Take time to periodically check that no defective tile are being laid and that the Tiler is following your instructions. If you have any doubts or concerns as the job progresses, stop the tiling and make consultations.

2. Choosing your tiles:


Manufactured tiles are not perfect, while manufacturing allows for a lot more control and consistency in determining the final tile product than let's say, a piece of stone cut out of the ground, tiles still vary within a production run in colours, size and appearance (variations in ingredients, temperature both within the kiln and outside air temperature) all influence the end result. Take these steps while buying your tiles
i) Order more tiles than the area being tiled and check that the correct quantity is delivered : your tiler should factor this when working out quantities required and will often allow an additional 10-15% of the area being tiled. (this cover wastage when cutting and during transportation and also allow you to hold a box or more of spare). Every production run results in different shades and even if you can still source the same tile down the track, it is most likely to be from a different shade which may be noticeably different.

ii) Check boxes delivered all show shades/tone reference, while manufacturers takes care to deliver tiles from the same batch, occasionally error can occur. Laying constitutes acceptance of the product so it is important to identify any issue prior to laying.

iii) Check you are happy with the colour, size, quantity of products delivered: most tiles of the same batch and box can vary in colour and size, some are negligable while some are not, it is important you and your tiler check 2-5 boxes prior to laying as laying constitutes acceptance of the product.

iv) Check for excessive brakeage: Tiles due to the number of time they are handled during transportation, loading and offloading, it is possible that some boxes may arrive damaged. In most cases this will not cause an issue as the Tiler can use the affected tiles to do cuts, however discuss this with the tiler , this will give his time to properly access the issue , before accepting deliveries from your supplier.

Ceramic tile flooring are clearly the most popular form of flooring in the building industry today, most intending home owners gets to his stage and become totally lost.
How do i go about it ?
How do i not over spend?
Which tile is good and not good for my project?
This are some of the FAQ that comes to mind when you are at the tiling stage.
In this article i'm going to try and address some of the issues that could make your tiles come out bad, and how you can minimize and if possible eliminate them in four simple but important steps.

1. Choosing a tiler : it is strongly recommended that your first step when you are at the tiling stage in your build is to get a tiling contractor or a competent tiler, ensure that you and your tiler have discussed and agreed on the detailed scope of work. We recommend that you discuss your tile selection with your tiler so that they know what they will be laying and can have the appropriate tools and materials on hand. Discussing your expectations will also help avoid any misunderstanding.

This thread is about our work, to showcase our past, present, and future projects. All kind of tiling related questions are welcomed.
Thank you.

...

250mm x 400mm wall tiles

...v

Happy Sunday to you all "our existing and intending customers . #tileright

...