If you are a wooden door or wooden furniture manufacturer or perhaps you need hardwood to be dimensioned to specific sizes for your interior or exterior wood projects like decking, cladding, wooden floor, pergolas etc, i have good news for you.

We understand the challenges faced by woodworkers when it comes to finding say a mahogany plank that is exactly 2 inches thick or 12 inches wide. Most of what is called a 1 inch plank in the market is usually 3/4 plank and the 12 inches could just be 10 or 11 inches. Apart from those shortages, the surface of these planks are so uneven that the plaining machines are brought under a lot of pressure when these planks are fed into them.

The good news is that over the years, we have invested in machineries that produce planks with even, smooth surface quality and accurate sizes. When we say it is 1 inch then it is 1 inch and not 3/4 inch. If the width is quoted to be 12 inches, then it s 12 inches and not 11 or 10 inches. In this way, our customer gets maximum value for their money and also gets the timber that fulfils and satisfies his/her production target.

Reach out to us for properly dimensioned hardwood planks and you will be glad you did.
Call/ WhatsApp 07033069929

This is our first post on Nairaland and I would like to use it to make a formal introduction about our business and operations.

Some time ago, a potential client told me that some construction companies in Nigeria who needed wood that were straight and properly dimensioned had to import it. I asked why? He said it was because there was no proper wood milling company in Nigeria. This story was kind of hard to believe for me so I investigated further. His claims where not completely valid because there are wood milling or saw milling companies that could produce sawn timbers to precise dimension but the reason why they are not known could be many but I know two from experience.

It is either that these contemporary sawmills have never considered giving their businesses visibility through deliberate marketing efforts or that they are busy milling timbers which they use for their internal furniture production.

Our company zubbywood sawmill has been in the business of wood for about ten years. We are like a hidden gem mostly because of the first reason that I gave earlier. Today, we have decided that the time is ripe for us to embark on the journey to make our business and the value that we can offer in the Nigerian wood processing/ saw milling industry known.

Over the years, we have invested in acquiring what I would call 21st century wood processing equipments that produces high quality timber that would rival others anywhere in the world. For us, competence does not just end with hardware acquisition. It has been complimented with requisite and complex skill cultivation through relevant technology transfer; having worked and partnered with several foreign wood processing companies.

We produce straight cut, accurate size timbers with great surface quality. Our sawn timbers are used for structural, architectural and construction purposes; exterior and interior wood application like wooden doors, wooden floor, wooden ceiling, decking, cladding, pergolas and many more.

We serve companies and individuals who want their wood in customised sizes or dimensioned to specific height, width and length for projects that we mentioned earlier.

Our factory address is KM 1 Old Lagos Ibadan Road, beside Gateway ICT Polytechnic Sapaade, Remo, Ogun state.
Call/ WhatsApp 07033069929

I love these louvre doors. It is worthy of commendation that Nigerian wooden door manufacturers can now compete with their foreign counterparts in terms of quality. Kudos!