Corn flour mill helps us make fine corn powder. With corn flour mill technology improvement, corn flour mill can help us make finener and finener corn powder.


The CORN FLOUR MILL should remove impurities in the raw maize, leaving quality material without mildew, worm damaged and odorous cobs. The pure maize is poured into a big shallow basin and manually selected. The pure particles contain no more than 3% impurities.
Wash the particles repeatedly in avoidance of exceeding scrubbing to prevent them from loss of starch. The impurities should be removed in time during this process till the water appear transparent. Then you put the clean maize into a shallow container and sun it until the surface is dry.
Then corn flour mill conveyed the material to the dryer and keep them there for 7-8min under 110℃. The dried particles are not loose and scorched. The grinder is used to mill the maize. The maize flour is at 60-200 mesh with 20% moisture. Flour under 100 mesh is suitable for maize porridge; super fine flour over 200 mesh can be applied to enfants; the most common flour is at 120-150mesh which can be made into silk noodles,crust and instant noodles.

As the scientific technology develops, many new machines turn up. Let us talk about principles and cautions of CORN FLOUR MILL.
Corn flour mill is a multifunctional small grinder for corn and bean, suitable for grain, feed processing industries. Different specifications of sieve plates make the corn flour mill process materials with different fineness.
The corn flour milling machine is mainly composed of charging hopper, rotor, tooth plate, sieve, machine shell, base and motor. When the grain goes into flour milling chamber, the tooth plate knocks to grind the corn into fine flour which is discharged out of the outlet under centrifugal and air force.
Cautions of corn flour milling machine
1.When you use the corn flour mill, check tightness of all the parts regularly to prevent looseness.
2.Every oil hole should be added with grease regularly; clean the bearing every half a year and add lubricant.
3.Run the corn flour milling machine without load before stopping the machine to blow out the left grain.
4.When stop the corn flour mill, add lubricant to all the parts and keep the machine in dry storage.
janefan462@gmail.com
http://www.wintone-machinery.com/products/

Like hw much is this machines base on capacity