Step 1: Go to the link below and download (http://www.mediafire.com/download/3bzg7sr66kc785a/SDATA.zip)

Step 2: Open and extract it to a driver except (C)

Step 3: Put in your USB (flash drive) into the Computer/Laptop

Step 4: Open the place where you extracted your files from the link in step 1

Step 5: Open SDATA Tool

Step 6: You'll get something like this 'choose your place where your USB (flash drive) is (Mine is for example (E)

Step 7: Press OK on the pop up window

Step 8: Choose a name for your USB (Optional)

Step 9: Choose the active botton (4gig, 8gig etc) then press E-Compress Now. Wait for few minutes then press OK.

Your Flash is ready to be used.

Biocon

You do realise that you have not increased the storage space on ur flash drive. What you've done is enabled compression which is not the same. Also if anything happens you'll lose everything on the drive. You cannot physically increase the storage on any storage device after it's been made!

if you check the property of the flash drive, it remains the same. when you format it, it reverts to the previous size so what is the point?