Gud morning house,

Let’s work for you..

Pop & wall screeding

WhatsApp 07088534661

Dubemcapital1:





Nice one, i like those samples

Thanks you sir/ma

New offloading Spanish tiles, as many Of your choice. Still your blessed sunny tiles dealer

Please how much would it cost to fence a 250sqm land

Please how many 6inch block would fence a full plot of land? And how many couch? Thank you

sonnie10:

Please how did you arrive at the figures for the length and width of the columns being that he has 16 pillars ( assuming each pillar is 9 feet which is approximately 3m in length).

"Length 50feets: breath 25feets: width 9inch"

The above is the dimension he gave me.
Although, that is not what i was expecting as i don't understand the basis of the value but i don't want to go back and forth. i stated that i was going strictly with his dimension. I only converted to m/mm

Sankabson:
I have 2 bedrooms apartment at Igando housing estate. Newly built by Lagos State Government.

How much is it please

Olumighty123:
Please how many 6inch block would fence a full plot of land? And how many couch? Thank you

size of plot varies with location most times..... what is the dimension of the said plot

EyeBee04:
Please how much would it cost to fence a 250sqm land

what location?

Hardwood available for sale check my signature for contact

EyeBee04:
Please how much would it cost to fence a 250sqm land

Olumighty123:
Please how many 6inch block would fence a full plot of land? And how many couch? Thank you

The simplest way to calculate the numbers of blocks you need for your fence project, assuming you are fencing a land measuring 120 feet by 60 ft, a standard plot

This calculation is based on 9 inches block fence .
The measurement we are using is 120 ft (length) and since we have two lengths that is multiply by 2 which is 240 ft. (120 x 2) = 240

The breadth is 60 ft and also since we have 2 breadths that equal 120 ft (60 x 2) = 120
Then (240 + 120) that is 360 feet perimeter line fencing.

The calculation

(we are to convert this 360 feet to inches ) since a foot is 12 inches , now let us multiply 12 inches by 360 ft which is 4320 inches.

Now to get the line numbers of blocks that will go around the fence perimeters of 4320 inches or 360 feet, we would need to divide 4320 by 18 inches, since the length of any block be it 6 inches or 9 inches is 18inches.

Now 4320 inches divide by 18 inches is approximately 240 line of blocks , then we must multiply that by the numbers of coaches of blocks you want for your height, assuming 7 ft which is 9 coaches that means 240 multiply by 9 which is 2160 blocks and that is all you need anything aside from this is fake and fraud, this calculation is derive by me professionally and i have been using it without any mistake, but always remember to add 10 % of blocks to it because of broken blocks, and for this work, you only need 30 bags of cements, one bag of cement to 70 blocks, is standard.

for your pillars between the fence, let assume 6 blocks far from the next pillar, that means 6 divide by 240 which is 40 pillars, 1 bag of cement to 2 pillars standard, that is 17 bags plus 40 bags that is 47 bags is need by me to do this fence, if i'm in position and you should also to add 15 bags for floor blinding of the fence making 62 bags of cement.

Then, we need to minus the gate and the pillars that are also taking space in the fence.

The gate is 12 ft, let us assume the gate columns or pillars is 14 inches each, we have 2 pillars holding the gate, that is 28 inches or 2. 4 feet plus 12 feet that is 14.4 feet or approximately 15 feet.

Remember we already calculate the pillars that 40 pillars is need for the measurement.

Each pillar or column for 9 inches concrete is 9 inches square, 9 x 40 = 360 inches that is (30 feet + 15 feet = 45 feet ) / 18 inches = 30 blocks multiply by the number of coaches, 30 x 9 = 270 block minus 2160 blocks = 1890 blocks in total.

40 lengths of 12mm iron rod, since one pillar is equivalent to 1 length.

3 lengths of 16mm iron rod for the 2 big pillars holding the gate.

90 planks of soft wood for the framing.

1 truck of granite (granite would be use for the wall foundation and columns)

About 5 trips of Sharp Sand.

Regards.

For more info call 09132123240 or email life lightproperties@gmail.com

Contact us today for your aluminum and Gerard roof and also rain water collector.

hslbroker2:



The simplest way to calculate the numbers of blocks you need for your fence project, assuming you are fencing a land measuring 120 feet by 60 ft, a standard plot

This calculation is based on 9 inches block fence .
The measurement we are using is 120 ft (length) and since we have two lengths that is multiply by 2 which is 240 ft. (120 x 2) = 240

The breadth is 60 ft and also since we have 2 breadths that equal 120 ft (60 x 2) = 120
Then (240 + 120) that is 360 feet perimeter line fencing.

The calculation

(we are to convert this 360 feet to inches ) since a foot is 12 inches , now let us multiply 12 inches by 360 ft which is 4320 inches.

Now to get the line numbers of blocks that will go around the fence perimeters of 4320 inches or 360 feet, we would need to divide 4320 by 18 inches, since the length of any block be it 6 inches or 9 inches is 18inches.

Now 4320 inches divide by 18 inches is approximately 240 line of blocks , then we must multiply that by the numbers of coaches of blocks you want for your height, assuming 7 ft which is 9 coaches that means 240 multiply by 9 which is 2160 blocks and that is all you need anything aside from this is fake and fraud, this calculation is derive by me professionally and i have been using it without any mistake, but always remember to add 10 % of blocks to it because of broken blocks, and for this work, you only need 30 bags of cements, one bag of cement to 70 blocks, is standard.

for your pillars between the fence, let assume 6 blocks far from the next pillar, that means 6 divide by 240 which is 40 pillars, 1 bag of cement to 2 pillars standard, that is 17 bags plus 40 bags that is 47 bags is need by me to do this fence, if i'm in position and you should also to add 15 bags for floor blinding of the fence making 62 bags of cement.

Then, we need to minus the gate and the pillars that are also taking space in the fence.

The gate is 12 ft, let us assume the gate columns or pillars is 14 inches each, we have 2 pillars holding the gate, that is 28 inches or 2. 4 feet plus 12 feet that is 14.4 feet or approximately 15 feet.

Remember we already calculate the pillars that 40 pillars is need for the measurement.

Each pillar or column for 9 inches concrete is 9 inches square, 9 x 40 = 360 inches that is (30 feet + 15 feet = 45 feet ) / 18 inches = 30 blocks multiply by the number of coaches, 30 x 9 = 270 block minus 2160 blocks = 1890 blocks in total.

40 lengths of 12mm iron rod, since one pillar is equivalent to 1 length.

3 lengths of 16mm iron rod for the 2 big pillars holding the gate.

90 planks of soft wood for the framing.

1 truck of granite (granite would be use for the wall foundation and columns)

About 5 trips of Sharp Sand.

Regards.

For more info call 09132123240 or email life lightproperties@gmail.com

Thank you very much, very detailed. I've shared this for future references. Thank you once again.

Olumighty123:


Thank you very much, very detailed. I've shared this for future references. Thank you once again.

You are welcome sir, thanks for sharing, God bless you.

bobkezel:


Good morning, what kind of tiles would you suggest for sitting rooms, rooms, lobbies and verandas?

good evening well all depends on your budget sir
You can use 60x120 super polish sitting room while 60x60 for rooms while 30x60 or 60x60 lobbies and veranda

hslbroker2:



The simplest way to calculate the numbers of blocks you need for your fence project, assuming you are fencing a land measuring 120 feet by 60 ft, a standard plot

This calculation is based on 9 inches block fence .
The measurement we are using is 120 ft (length) and since we have two lengths that is multiply by 2 which is 240 ft. (120 x 2) = 240

The breadth is 60 ft and also since we have 2 breadths that equal 120 ft (60 x 2) = 120
Then (240 + 120) that is 360 feet perimeter line fencing.

The calculation

(we are to convert this 360 feet to inches ) since a foot is 12 inches , now let us multiply 12 inches by 360 ft which is 4320 inches.

Now to get the line numbers of blocks that will go around the fence perimeters of 4320 inches or 360 feet, we would need to divide 4320 by 18 inches, since the length of any block be it 6 inches or 9 inches is 18inches.

Now 4320 inches divide by 18 inches is approximately 240 line of blocks , then we must multiply that by the numbers of coaches of blocks you want for your height, assuming 7 ft which is 9 coaches that means 240 multiply by 9 which is 2160 blocks and that is all you need anything aside from this is fake and fraud, this calculation is derive by me professionally and i have been using it without any mistake, but always remember to add 10 % of blocks to it because of broken blocks, and for this work, you only need 30 bags of cements, one bag of cement to 70 blocks, is standard.

for your pillars between the fence, let assume 6 blocks far from the next pillar, that means 6 divide by 240 which is 40 pillars, 1 bag of cement to 2 pillars standard, that is 17 bags plus 40 bags that is 47 bags is need by me to do this fence, if i'm in position and you should also to add 15 bags for floor blinding of the fence making 62 bags of cement.

Then, we need to minus the gate and the pillars that are also taking space in the fence.

The gate is 12 ft, let us assume the gate columns or pillars is 14 inches each, we have 2 pillars holding the gate, that is 28 inches or 2. 4 feet plus 12 feet that is 14.4 feet or approximately 15 feet.

Remember we already calculate the pillars that 40 pillars is need for the measurement.

Each pillar or column for 9 inches concrete is 9 inches square, 9 x 40 = 360 inches that is (30 feet + 15 feet = 45 feet ) / 18 inches = 30 blocks multiply by the number of coaches, 30 x 9 = 270 block minus 2160 blocks = 1890 blocks in total.

40 lengths of 12mm iron rod, since one pillar is equivalent to 1 length.

3 lengths of 16mm iron rod for the 2 big pillars holding the gate.

90 planks of soft wood for the framing.

1 truck of granite (granite would be use for the wall foundation and columns)

About 5 trips of Sharp Sand.

Regards.

For more info call 09132123240 or email life lightproperties@gmail.com

Him suppose buy you one bottle

Akerewe:


How could the length of a pillars b 50feets? Which kind wahala b this! Pillars is 3meters each or 10feet each highest. The building length is 50feets while the breath is 30feets. Pillars is usually 9" inches width each. I don't understand ur question oo

Ok

DMTtechnologies:


"Length 50feets: breath 25feets: width 9inch"

The above is the dimension he gave me.
Although, that is not what i was expecting as i don't understand the basis of the value but i don't want to go back and forth. i stated that i was going strictly with his dimension. I only converted to m/mm

Except there is different information, please see the above reference for the stated dimensions .

DFAMEGUY11S:
good evening well all depends on your budget sir
You can use 60x120 super polish sitting room while 60x60 for rooms while 30x60 or 60x60 lobbies and veranda

I actually mean kind, like, porcelain, vitrified, Spanish, 9ja,china etc

kalu61:


Him suppose buy you one bottle

lol, knowledge must be shared, for we came to this world with nothing, we are all going to leave this world with nothing.

Thanks God bless you.

hslbroker2:
lol, knowledge must be shared, for we came to this world with nothing, we are all going to leave this world with nothing.

Thanks God bless you.

I love your open mindedness bro.

Many will gain from the information you shared.

10m asking price...

Legal Title: Letter of Allocation
For further Info;

Sanusi Kabeer & Co.
08134898679 07016585600

DMTtechnologies:


How much is it please

kalu61:
I love your open mindedness bro.

Many will gain from the information you shared.

This is the main reason I did this

Many love for you for recognizing simple intelligent sharing..

It is my profession.


This what I can give back to this community that have helped me so much.

bobkezel:


I actually mean kind, like, porcelain, vitrified, Spanish, 9ja,china etc

Spanish porcelain is okay for sitting room then you can use Niger porcelain 60x60 for rooms and other areas while 30x60 Niger for wall

Can I determine the number of pop cement that will be used in a 119sqm space?

Im in need of a cement board installer for my roof cladding/fascials. Location:Benin city

Thanks so much, will try it and revert

rotecch77:


Go to where they sold kitchen pot ask them you need “ film” used to wash back of stained pot, it’s a white dry substance sold around N200 per one, buy as many as you can.
Apply it into sponge and wash the stainless, it will clear off.
Then you can buy liquid stainless cleaner to shine it. With N2000 all your stainless will look like new one
That is all.

Gud morning here,

DFAMEGUY11S:
Spanish porcelain is okay for sitting room then you can use Niger porcelain 60x60 for rooms and other areas while 30x60 Niger for wall

OK, thanks.. What do you suggest for verandas?

Adedward:
Gud morning here,

What's this kind of window called in layman's?

=LordPherule post=118786678]
What's this kind of window called in layman's? [/quote] casement windows