This can get you an alternative
distribution in residential and
commercial buildings when made at
a larger scale.
In this alternative power article, you
will learn how to construct a
hydroelectric generator at home. It
is easy, only if you can concentrate
well enough. The generator will be
most suitable for those living near
water bodies eg streams.
STOP ONE:
The hydroelectric generator will
consist of two main parts, namely:
STATOR:this part does not move
and contains the coils that collect
electricity produced by your
hydroelectric generator.
ROTOR: The rotor is the moving part
, it has some powerful coils that
induce electricity in the coils.
The first thing to do is that you will
get some templates and a
cardboard.The templates containing
stator and rotor scheme should be
cut and attached to the front and
back of the cardboard and after this
,make a hole about 1 cm at the
center of the stator disk.
STEP TWO:
After all that in step one is ready ,you
should now proceed to making 4
coils ,these will be attached to the
cardboard. To do this ,you will
have to make a cardboard into an
oval shape , then you start winding
the wires ,which you must have
provided for this, on the cardboard
carefully to form a fine and tight coil,
each coil should be ....too long...just
click link..to read full article.... www.mariosinn..co.ke/2016/02/a-practical-guide-on-how-to-make.html?m=0