seanfer:


Good afternoon Boss.... My 2006 Camry keeps throwing P2423.. O2 spacer was installed at your workshop when i came to lagos last month and my journey back to PH was smooth ... I have clear the Code like 3 times and keeps coming up... What do i do?

GAZZUZZ:


might have to instal different type of spacer. Or replace catalyst

seanfer:


Do you have the different spacer?

SpeedRacer:
Good evening sir I have a Honda accord with P2646 and P0341 please urgent help is needed

Where are you going to?

Meanwhile you have 2 very interesting codes here.

0341 refers to a performance issue on the signal from camshaft (possible timing issue, possible sludge issues, possible welding of camshaft actuator.

Next is a 2646, which is the rocker are actuator with performance issues or stuck off. (Possible timing issues, oil pressure issues, sludge )

There is no easy fast route to this fix, but diligent step by step diagnosis in eliminating possible causes.

P.S do not replace the camshafts sensors on a honda, they never die

GAZZUZZ:


Where are you going to?

Meanwhile you have 2 very interesting codes here.

0341 refers to a performance issue on the signal from camshaft (possible timing issue, possible sludge issues, possible welding of camshaft actuator.

Next is a 2646, which is the rocker are actuator with performance issues or stuck off. (Possible timing issues, oil pressure issues, sludge )

There is no easy fast route to this fix, but diligent step by step diagnosis in eliminating possible causes.

P.S do not replace the camshafts sensors on a honda, they never die

GAZZUZZ:


Where are you going to?

Meanwhile you have 2 very interesting codes here.

0341 refers to a performance issue on the signal from camshaft (possible timing issue, possible sludge issues, possible welding of camshaft actuator.

Next is a 2646, which is the rocker are actuator with performance issues or stuck off. (Possible timing issues, oil pressure issues, sludge )

There is no easy fast route to this fix, but diligent step by step diagnosis in eliminating possible causes.

P.S do not replace the camshafts sensors on a honda, they never die

ozoneymcm:

Oga Gazzuz good afternoon. I asked for help two days ago so I’m reposting since you didn’t see it. Please I’m trying to register a car but can’t locate the engine number. Vehicle is Toyota Sienna 2005. Thanks

mikefem58:
Gazzuzz my 2009 Toyota Camry vibrates when AC is turned on, please assist with a fix

GAZZUZZ:


Where are you going to?

Meanwhile you have 2 very interesting codes here.

0341 refers to a performance issue on the signal from camshaft (possible timing issue, possible sludge issues, possible welding of camshaft actuator.

Next is a 2646, which is the rocker are actuator with performance issues or stuck off. (Possible timing issues, oil pressure issues, sludge )

There is no easy fast route to this fix, but diligent step by step diagnosis in eliminating possible causes.

P.S do not replace the camshafts sensors on a honda, they never die

mikefem58:
Gazzuzz my 2009 Toyota Camry vibrates when AC is turned on, please assist with a fix

GAZZUZZ:


Take a picture of your compressor

mikefem58:
There you go...

SpeedRacer:



Good morning sir ,
Took of the spool behind the engine block, looks pretty neat , also the timing actuator hasn't been welded because there is rattle on start up . Maybe I should just seek professional help and stop this DIY

SpeedRacer:



Good morning sir ,
Took of the spool behind the engine block, looks pretty neat , also the timing actuator hasn't been welded because there is rattle on start up . Maybe I should just seek professional help and stop this DIY

MotorGuru:


Good.

Also check the VTC strainer.
to access this, you need to take off the power steering pump and (very likely ) the self-adjusting tensioner
the strainer looks like this:

GAZZUZZ:


You have nothing to loose, continue diagnosis by elimination

Any history of engine disassembly?

MotorGuru:
also check confirm that engine timing is correct. May not be DIY.

SpeedRacer:


None , but it seems the top has been opened before .
Engine sounds great and runs smoothly just for the lights that tend to come on and the power loss I think I'm feeling when I accelerate hard.

GAZZUZZ:


You were replied by another member and it was solid.

GAZZUZZ:


Does it go into limp mode? (Not exceeding 3,000rpm)

ozoneymcm:

Reply was that number was at rear of the engine. Does that mean the engine has to be dropped to check it or there’s a way to check that By only a good mechanic. Other member didn’t answer this question

Kaybaba5:
Oga gazzuz
Is there any difference between v6 and v4 camry droplite car engine...

Which one do u advise to buy

Kaybaba5:
Oga gazzuz
Is there any difference between v6 and v4 camry droplite car engine...

Which one do u advise to buy

GAZZUZZ:


Avoid the V6.

somethinggood:
I noticed my sienna 2005 model doesn't move like before and felt like there is a blockage somewhere and vibrates on hold, also there was a sound as u crank the engine... Mechanic tonned camshaft and said its silencer touching the body of vehicle... He asked panel beater to check which the panel beater changed silencer net and work on silencer.. Still yet the problem is there... Engine mileage is 200788 as at this morning

I scanned and got this codes
[size=8pt][/size]
Fault log report generated by Torque for Android
=================================================

Vehicle VIN:
Vehicle Manufacturer:
Vehicle Calibration ID:

Current Fault Log
------------------
P0016: Crank-Cam position correlation
P0031: HO2S Heater Control Circuit Low (Bank 1 Sensor 1)
P0037: HO2S Heater Control Circuit Low (Bank 1 Sensor 2)

Pending Fault Log
------------------
P0300: Random/Multiple Cylinder Misfire Detected
P0301: Cylinder 1 Misfire Detected
P0303: Cylinder 3 Misfire Detected
P0305: Cylinder 5 Misfire Detected

Historic Fault Log
------------------
ECU reports no historic faults
Other discovered fault codes
(possibly pending, current or manufacturer specific)
----------------------------------------------------

End of report.




I cleared the codes and and scanned... After rescanning, this one still came up below


Fault log report generated by Torque for Android
=================================================
Vehicle VIN: Not present
Vehicle Manufacturer: Unknown
Vehicle Calibration ID: Not present

Current Fault Log
------------------
P0031: HO2S Heater Control Circuit Low (Bank 1 Sensor 1)

Pending Fault Log
------------------
P0016: Crank-Cam position correlation

Historic Fault Log
------------------
ECU reports no historic faults
Other discovered fault codes
(possibly pending, current or manufacturer specific)
----------------------------------------------------

End of report.

Please what do I tell mechanic in layman's term to do. Thanks as I anticipate help from all....

Kingsdave:
Help me out please... I have noticed as of late , when my car is parked for some hours let's say 5-10 hrs... Once I start it ... Engage either drive or reverse ... The rev counter near the speedometer will be revving but the car will be moving slowly no matter how much I press the pedal... It does that for about 10 mins before it moves fine... What's wrong Its a Toyota Camry 2009 thumb start xle