TEMPERATURE & HUMIDITY SENSOR FOR SERVER ROOM MONITORING, RECEIVE ALERT ON YOUR PHONE

Temperature/Humidity Sensor Notifications & Alert
An essential part of any server room monitoring system is accurate temperature and humidity monitoring. High temperatures can lead to system failure, unwanted downtime and costly repairs. Our Intelligent G-Alert Temperature & Humidity sensors help to avoid these costly errors with easy to configure, cost effective systems that are ready to run, right out of the box.
Events that lead to IT equipment disaster and failure can be avoid by using G-Alert device to proactively alert the IT staff to maintain equipment correctly or to take corrective action. When events occur, this intelligent Monitoring system can be configured to send notifications alert at interval to an IT Staff

Temperature Sensor
Monitoring air temperature is essential in any area with IT equipment. It is particularly important to monitor air temperature in rooms, racks, and directly around the equipment. The common method of achieving this is by using intelligent temperature monitor sensors. If air temperature is not monitored, it can lead to equipment failure or a reduction in the equipment lifespan. This is caused by air temperatures above equipment specifications and frequent, drastic temperature changes.

An optimal environmental monitoring strategy includes intelligent temperature sensors like G-Alert. These should be placed on top, middle of server room close to the racks to measure the heat being generated by equipment, and at the air conditioning system’s intake and discharge vents, to measure efficiency. Probes should also be placed around critical devices, because the temperature inside a rack-mounted device could be as much as 20 degrees higher than the surrounding area. A probe near the room’s thermostat can help monitor what the thermostat is ‘seeing’ as it controls the air conditioner.

Humidity Sensor
High humidity may lead to corrosion on electronic components and low humidity levels may cause issues with static electricity. Humidity must be monitored at the room and rack level. The focus must be on the relative humidity at specific operating temperatures - not humidity level general. This is archived by using humidity sensor, if there is too little humidity, equipment failure can be caused by static electricity buildup. If there is too much humidity, condensation can cause equipment failure and create and unsafe working environment for personnel

Product Description
The G-Alert Environment Alarm is special for remotely monitoring onsite temperature, humidity, power status through wireless GSM Network. When the temperature, humidity, power voltage exceed high threshold or low threshold value, the system will send SMS alert to up to 10 preset mobile phones numbers immediately and automatically.

Just dial the system from Authorized User number, the G-Alert Environment Alarm will reject the call at the first “Ring" (no communication cost) and then return the current temperature, humidity, power status or voltage. Moreover, it can report onsite environment at intervals or daily.
The G-Alert Environment Alarm can be used for monitoring Server room, Office, Meeting Room, Laboratory, Library, Solar power, Class Room, Public Room, Waiting Room, Hospital, Warehouses, Stations, Remote sites or anywhere that requires monitoring of temperature, humidity and power.

Main Features
• Can be operated from anywhere, no distance limitation.
• No call charges for inquiry, the G-alert Environment Alarm rejects the call from authorized number then returns onsite temperature, humidity, and power voltage on the first 'ring'.
• Multiple applications (temperature, humidity, power status, solar panel, dc voltage)
• Up to 10 authorized phone numbers, 5 can be used to receive call or SMS, and 5 can be used to call and SMS during alarm occurrence.
• One Temperature & Humidity sensor input, measures temperatures from -40-80'C to 0.5°C accuracy.
• Relative Humidity from 0-99RH% , accuracy is 3%.
• External AC Power status monitoring, AC On/OFF will send SMS to authorized phone numbers.
• Inbuilt MCU monitoring the DC input Voltage value, measure range is 9-24VDC, no need for additional sensor to save cost.
• Timer Report—Can be setup to report parameters every x hours automatically by sending status/value to the authorized numbers.
• Support remote reading of historic data via SMS
• Rechargeable Backup Battery inside can last 8hours
• Secure - Using caller ID and password for identification, unknown callers are ignored;
• Programmable by SMS Commands or APPs with password protection
• Based on GSM Network
• Usable for many applications.

Standard Packing List
G-Alert Environment Alarm X 1;
Antenna X 1;
AC/DC adaptor(12V1 A) X1 ;
User Manual X 1.
Note: The package does not include any SIM card.

Technical specifications
Parameter item: Reference scope
DC Power supply: 9-24VDC, recommend 12VDC1A
Power consumption : 12V input Max. 50mA/Average30Ma
Frequency range SIM: 850/900/1800/1900Mhz
Card: Supporting 3V SIM Card
GSM Antenna: 50 Q SMA Antenna interface
Temperature range: -40-+80 °C
Humidity range: Relative humidity 0-90% (condensation free)
Temp&Humidity: Temperature&Humidity Sensor, -80°C (0.5°C accuracy) .Relative Humidity from 0-99RH%,accuracy is 3%.
Sensor: W130mm*D74mm*H27mm
Backup Battery: 900mAH, lasts 8hours
Exterior dimension
Net Weight: 300 g

G-Alert: Environment monitoring over GSM/GPRS
• With the Android Application software, G-Alert can offer an instantly usable data collection solution.
Data outputs include logs+MS Excel analysis or a XML database.
• SMS notification of up to 10 recipients is advantageous for simple applications.
Text messages can be customized with macros.
• Sensor or device status can be requested by texting or calling the device.
• Configuration software needs no installation. Simply use android application from your phone after connecting the together all the component.
o The internal battery enables alerting to failed/restored power supply. Suitable for monitoring UPS and back-up generators.
o Roaming functions reduce data costs outside of the home GSM network. Suitable for automotive or marine applications.

Applications and usage examples
• GPRS monitoring of a server room without connecting to the local LAN
• Diesel generators – environment and status monitoring
• Back-up power supply systems
• ATM (Automatic Teller Machines) environment monitoring
• Cooling systems and coolers
• Antennas and microwave links
• Technology along roads, highways, or railroad tracks
• Road surface or railroad track temperature and status
• Temperature and displacement of structures
• Storages of food or materials
• Art exhibits and depositories
• Agricultural production premises (greenhouses, granaries, etc.)
• Electricity distribution networks (transformer stations, lines)
• Water source monitoring, including technical equipment status
• Monitoring of appliances with consumable, refillable content (vending machines for coffee, sandwiches or drinks, massage chairs, ...)
• Also known as: remote environment monitoring system, monitor server rooms, computer room, network closet, temperature sensor, remote power reboot, server room monitoring.

Environmental threats in your server room can cause a lot more damage than hardware or software problems. Redundant hardware, backup tapes, UPS battery arrays, generators and other fault-tolerance measures can all be rendered useless if your server room overheats or floods. Don't ignore environmental threats – remotely manage them with G-Alert intelligent temperature sensor

Price: call 08.0383682.55

Available in stock, see my signature for contact

Monitor Temperature, Humidity, Power supply in your server room and other room with IT Equipment and receive SMS alert before any of your equipment goes down.

Comes with android apps with configuration, call for your order, available in stock

Receive SMS Alert, when temperature rise above threshold settings.

Receive SMS alert when when humidity is too much in your DataCenter, server room, etc.

Receive SMS alert when Electricity power went off, also receive SMS alert when power comes back

Call for your order

Happy new month,

Order for your device to monitor temperature, humidity, power in your server room..

Available for immediate deployment

Merry chrismas & happy new year in advance to all our numerous client & customer

Count down to new year, we wish all our numerous customer/client prosperous new year ahead

Happy new year to our numerous client/customer from this forum

We thanks our numerous customer who patronized us through this platform.


Thank you all,,,,.

Still available in stock

...

. ..

.....

Available for immediate deployment

Receive SMS alert before any disaster

Available for immediate deployment

get SMS alert before outrageous disaster occurred...
.

Available for immediate deployment

Available in stock

Available on stock

..

Nationwide deployment

We thank you all for your patronage

Still available

Available in stock

Still available in stock

Delivery nationwide

Thanks for your patronage,

Remote configuration

Happy weekend

This sensor is very useful but I think that it is an old one. Now we have different new dehumidifiers that don't need a sensor. You can set them how you need and want and let it do its job. I have a friend who was always complaining about the high humidity in his basement. That is why he found a blog about Aero State and read all the information about the dehumidifiers and choose the one which was the best for his basement. Now he doesn't have such problems, also he doesn't need some more devices for it.