uwemjack:


State the start and finish date

Dennis3D:


See dates now

uwemjack:


Why didn't you construct a "mallam step"

EgunMogaji:


I actually salute him for not doing this. This is part of wastefulness that’s rampant in Nigerian builds as I discussed with AbdulWastecx a few weeks ago.

Dennis3D:
And we casted the staircase first to enable us do the decking...

uwemjack:



Time and cost on a scale.
The mallam step though additional cost will save him 2days plus, considering he has a time constraint of 30day.
Also he will pay more in terms of Labour to cast the upper floor in two days, whereas they could be done in a day.
In the long run what you think you are saving by not using a "mallam step" for a project of this nature, you loose in time.

Let's do the maths
1. Cost of mallam step: materials and Labour = 22k
2. Cost of not using a mallam step - Labour to cast steps only = 10k + cost of additional 2day staying in an hotel and feeding and logistics= over 22k

Emphasis on this project considering the variables

EgunMogaji:


Here’s is the Achilles heels to your eloquent argument.

Is he going to cast the steps eventually? [/b] if he installs a "mallam step" both will be casted on the same day[b]

As a client I’m saving money on materials = wood. [/b]you loose time and the contractor money[b]

As a contractor I’m adding to my bottom line = efficiency. No rework. rework is as a result of poor workmanship or supervision

Emphasis on the project to me is a well built structure. A timely built structure that wastes resources is not ideal. time, quality and cost

A good contractor should be able to frame and pour a flight of stairs in a day. With the right concrete mixture and support it is ready for use immediately so zero you will have to use a more expensive cement = more money, even at that not advisable to start walking up and down with loads of concrete. It will stress the concrete and you don't want that on a structural member time loss.

I’m still keeping an open mind to garner knowledge.

uwemjack:



Time and cost on a scale.
The mallam step though additional cost will save him 2days plus, considering he has a time constraint of 30day.
Also he will pay more in terms of Labour to cast the upper floor in two days, whereas they could be done in a day.
In the long run what you think you are saving by not using a "mallam step" for a project of this nature, you loose in time.

Let's do the maths
1. Cost of mallam step: materials and Labour = 22k
2. Cost of not using a mallam step - Labour to cast steps only = 10k + cost of additional 2day staying in an hotel and feeding and logistics= over 22k

Emphasis on this project considering the variables

Rubbiish:

Hmmm....U mean u casted the staircase as means to the deck?
Was the staircase given enough time to garner strength before receiving movement from floaters...What happened to mallam stair?

EgunMogaji:


Here’s is the Achilles heels to your eloquent argument.

Is he going to cast the steps eventually?

As a client I’m saving money on materials = wood.

As a contractor I’m adding to my bottom line = efficiency. No rework.

Emphasis on the project to me is a well built structure. A timely built structure that wastes resources is not ideal.

A good contractor should be able to frame and pour a flight of stairs in a day. With the right concrete mixture and support it is ready for use immediately so zero time loss.

I’m still keeping an open mind to garner knowledge.

Dennis3D:


With my time frame. Am using a very good mixture of grade 15 and 20 concrete. That way am good to go.

Remember this is my 5th project this year and in fact my busiest year as far as building and construction is concerned and so much experience is already gathered.

Dennis3D:
This is the 3D Design of what we are doing

EgunMogaji:


You have my support for not doing double work on the steps.

What is the oldest build you’ve done and have you returned for inspection?

Thanks for sharing.

gordonbarrett:


Nice design.

Wondering the Material used for this type of facia and soffit. Is it plasterboard?

EgunMogaji:


You have my support for not doing double work on the steps.

What is the oldest build you’ve done and have you returned for inspection?

Thanks for sharing.

Dennis3D:


It's called Kalsi Board. POP Water resistant plasterboard can be used too or direct concrete facial casting

gordonbarrett:


Thanks for the information.

Is the Kalsi board cost effective compared to plasterboard, and will it require screeding after installation or just painting? I know it should be cheaper that concrete facia.