What causes the unstable quality of the 115*1*22 cutting disc?
115*1*22 cutting disc is convenient and easy to use. It is one of the grinding tools commonly used in the abrasive industry. However, there are many quality problems in the production process of the cutting piece. The material is multidisciplinary, so the reasons are complex and numerous. Below, I will analyze why the quality of the 115*1*22 cutting disc is unstable:
1. Cutting sheet manufacturing process problems
The manufacture of the dicing sheet is a highly technical industrial product. If there is a quality problem, it can be found in the process of compounding, molding, hardening, and processing.
2, raw materials
Abrasive quality is uneven, and the binder particle size is too coarse, which will affect the hardness and strength of the cutting piece.
3. Inspection equipment problems
Raw material inspection, process inspection and factory inspection are important contents for the implementation of effective inspection and control of cutting sheet production enterprises, but there are few production enterprises that truly standardize management and standardization management. The main problems are incomplete systems, unimplemented functions, lax management, short control of inspection equipment, and poor quality of inspection personnel.
4, equipment problems
The equipment of the enterprise is not complete, the lack of good mixing machine, the tonnage specification of the hydraulic press is too small, and the maintenance of the equipment is poor, and the product quality is not easy to guarantee.