Introduction
Business processes are driven by a workforce, not just a workforce, but an effective workforce with the requisite skills, knowledge and competences. With the day to day advancement in technology and business management processes, the need to continually up-skill by workers has become a necessity. With up-to-date knowledge and skills in carrying out their roles, workers are able to be proactive in their decision making and respond to issues timely. A competent workforce eliminates downtime, unnecessary waste in materials and finances and above all, they always love their jobs.


Training Services
Our Training and development programs are structured in accordance with our clients' needs as they can be customized and delivered in-plant/in-house and at locations of choice. We have a system in place with a post training follow-up on all our participants with our clients. This is to measure the level of improvement in the roles of the participants as it relates to the training program undertaken. Training to us is not just a yearly ritual but an investment with an expected Return on Training Investment (RoTI) which can be measured through our post training follow-up.

Our various training programs are approached and delivered through;

1. In-Plant/In-House Training Delivery: All our training programs are delivered in-plant/in-house for clients with both parties agreeing on set objectives for the training. This approach enables us to use the equipment of clients to carryout hands-on practice sessions and case studies built around those specifics without unnecessarily making the training generic. This also makes it easier for participants to transfer knowledge to their work responsibilities more easily and improve their efficiency.

2. Customized Training delivered at locations of choice: We customize training programs for clients to specifically address identified skill gaps and at the end of the training bequeath to the participants the right skill sets. We collaborate with our clients to work on the learning expectations based on a previous needs assessment. This form of training is targeted at a specific audience and areas of need of our clients.

3. Scheduled Short/Open Training: We offer training programs on Short/Open scheduled bases for Soft Skills/Non-Technical and Technical and HSE training programs. These training programs are delivered at our office with scheduled dates on our yearly training calendar. The training calendar can always be downloaded from our website or contact us through our numbers or email for electronic copies.
Prior to our Short/Open training programs commencement, we send pre-course questionnaires to our participants to capture their expectations and also let us know areas of great importance to them pertaining to the course. This enables us put together a training program that is robust and accommodates participants needs thus making them come out of the training well equipped with the right knowledge and skills to function efficiently in their jobs. This is to avoid making the training too generic without much benefit.

Angelus Consulting and Research Limited have the capacity and capability to provide these arrays of training programs to your organization;

Benefits of Using ACR Training Services
• All our training solutions are aligned to our clients’ need.
• Our training and consulting interventions are customized and participatory.
• We conduct local, regional and global research to stay abreast of the challenges and best practices facing organizations and thus services deployed using best practices.
• All training programs are specially delivered to meet our clients’ training expectations by bridging skill gaps through our training delivery.
• Our training programs and services ignite enthusiasm and inspiration and they accurately reflect clients’ objectives, culture and climate.
• Our experienced faculty members are always ready and available to meet with our clients in carrying our training needs analysis/assessment in order to improve the quality of training delivered to clients.
• We consistently strive to provide the needed solutions to our clients as meeting their needs is the primary reason of our services to them and this we always keep in our minds while delivery our training programs.
• We develop your own real life situations into case studies highlighting immediate practical applications, making skill development as natural, beneficial and as useful as possible.
• We work with our clients as partners and not just as a vendor or contractor because our primary aim is to be part of the process of providing solutions.

Kindly nominate/participate in these training programs and more coming up later in February, 2020.

1.Basic PLC Programming Troubleshooting & Maintenance Rslogix500
Date: 3rd - 7th Feb, 2020

Venue: Angelus Consulting and Research Limited. 70B, Olorunlogbon Street, Anthony Village, Lagos State.
Fee: N132, 000 (fee covers tea break, lunch, course materials, course bag, notepad/pen, certificate etc.). Discount available for a group of two and above.
Learning Objectives: At the end of this training program, participants will be able to;
Understand the operational principle of a PLC.
Identify and describe the functions of the system components of a PLC.
Operate a Programmable Logic Controller.
Make a Program in Ladder Diagram; Translate a ladder diagram program into electrical and logic circuits equivalent;
Effectively Carry out Basic Maintenance and Troubleshooting of PLC systems
Observe safe practices when working with PLC and its devices
For participation, space booking, course outlines and other enquiries, contact the undersigned.

2.Rotating Equipment Optimization Reliability
Date: 17th – 21st Feb, 2020
Venue: Angelus Consulting and Research Limited. 70B, Olorunlogbon Street, Anthony Village, Lagos State.
Fee: N172, 000 (fee covers tea break, lunch, course materials, course bag, notepad/pen, certificate etc.). Discount available for a group of two and above.
Learning Objectives: At the end of this course, participants will be able to:
Understand the operating characteristics of rotating equipment
Learn in detail all the diagnostic techniques and inspections required for critical components of rotating equipment
Understand the maintenance and troubleshooting techniques for rotating equipment
Learn the various methods used to maximize the efficiency, reliability and longevity of rotating equipment
Understand all the calculations and sizing techniques used for rotating equipment
Understand the causes and modes of failure of rotating equipment
Understand detailed fault-finding including examination of equipment deterioration and the development of cost effective corrective measures

3.AC Frequency Drives
Date: 12th-14th Feb, 2020
Venue: Angelus Consulting and Research Limited. 70B, Olorunlogbon Street, Anthony Village, Lagos State.
Fee: N120, 000 (fee covers tea break, lunch, course materials, course bag, notepad/pen, certificate etc.). Discount available for a group of two and above.
Learning Outcomes: At the end of this training program, participants will be able to:
Select Motors for various applications
Select Appropriate Ac Frequency Drives for a given Application Match Motors to AFD
Identify and Correct Drives System Problems
Identify and Test Major Drive System Components
Perform Start-Up of an AC Drive Program and Adjust the Drive for Desired Operation
Install correctly an inverter system
Interpret fault codes and resolve them

Reliability Centered Maintenance (RCM)

Date: 5th-7th Feb, 2020


Fee: N108, 000 (fee covers tea break, lunch, course materials, course bag, notepad/pen, certificate etc.). Discount available for a group of two and above.

Learning Outcomes: At the end of this training program, participants will be able to;

Develop a scheduled maintenance plan

Evaluate whether preventive maintenance is appropriate and determine optimum maintenance intervals

Analyze processes that are more efficient and more effective, utilizing lessons learnt from past analyses when applicable.



Electrical Troubleshooting & Repairs using Schematic Diagrams

Date: 10th-14th Feb, 2020


Fee: N138, 000 (fee covers tea break, lunch, course materials, course bag, notepad/pen, certificate etc.). Discount available for a group of two and above.

Learning Outcomes: At the end of this training program, participants will be able to;

Measure electrical parameters

Understand Single line diagrams

Understand three lines Diagrams

Identify, use and test electrical control components

Understand power and control of three phase motor control schematic diagrams.

Understand 5 steps approach to troubleshooting

Troubleshoot and rectify electrical faults using schematic drawings.

Identify, use and test electrical control components

Demonstrate practical troubleshooting skill



Instrumentation & Control in Process Plant

Date: 25th-27th Feb, 2020
Fee: N120, 000 (fee covers tea break, lunch, course materials, course bag, notepad/pen, certificate etc.). Discount available for a group of two and above.

Learning Outcomes: At the end of this training program, participants will be able to;

Understand the Principle of measurement and control of process variables such as temperature, flow rate, level and pressure.

Understand the types of control valves, sensors, transmitters and switches; describe their characteristics and their respective applications.

Identify Instruments on field machines and in (P and I) Diagrams

Understand different types of process control structure/methods

Carry out operation, basic installation and maintenance of Instruments

Register and join us in any of our technical and soft skills training for the month of February.

instrument and control training for just 2 days? what will one able to achieved attending two days seminar, I believe anything worth doing is worth doing well

instrument and control training for just 2 days? what will one be able to achieved attending two days seminar, I believe anything worth doing is worth doing well. instrument and control is broad and will be better understood with practical illustrations.

The training schedule for Instrumentation and Control in Process Plant is for 3 days Feb 25-27. This is for Process Plant and basically for those with hands-on experience.

akus6060:
instrument and control training for just 2 days? what will one be able to achieved attending two days seminar, I believe anything worth doing is worth doing well. instrument and control is broad and will be better understood with practical illustrations.