After acquiring a Dish TV Network for the time, but later some problems arises such as no signal and others, which prevent you from watching TV. Here are the common issues and their troubleshooting to fix those problems.

Troubleshooting Dish TV Network Problems At Glance:

Complete or Partial Signal Loss or No Signal
Black/Blue/Snowy Screen with Guide
Receiver Turning On and Off by itself
Receiver won’t turn on
Looking for Hopper
Receiver won’t turn on
Let’s discuss those troubleshooting one by one and how to get the problem fixed relating Dish TV Network on no signal and others.

Complete or Partial Signal Loss

There are many other problems relating to “No Signal or Loss Signal” error on your Dish TV Network System, with their corresponding error code displaying on the right corner of the TV screen. Some is usually caused by damaged cables, severe weather, malfunctioning equipment, a misaligned dish or major changes in the reception like new (ruging, carpeting, and roof).

Troubleshooting: “No Signal or Loss Signal” On Dish TV Network

To fix “No signal or Loss Signal on your Dish TV Network system, you have pay attention to the following tips:

1. Does Your Satellite Dish Outside Has Been Relocated?

Most of the satellites dishes available now need to align properly by a professional. If you have relocated your dish to another spot, It is good to call your local satellite technician to fix the dish properly or refer to Do-it-yourself guide here.

2. Does Your Dish TV Receiver Has Been Moved or Cable Changed?

If you have moved or changed your Dish Network receiver or cable connection from the original location to another. You can moved it back to the original place or properly check the configuration settings of both the cable connection and fix it back.

3. Do You Experiencing Severe Weather?

Dish TV Network signal is always strong. But if there’s severe weather in rare situations, there may be temporarily interruption service. To fix this, you have to wait for the severe weather to clear. You can still watch recorded event through DVR and connect internet to watch On Demand.

4. Is There Any Obstructions Blocking The Satellite Dish Outside?

After checking the sky that there’s clear view of the sky. Obstructions like trees branches, a storey building, mast tower, cobweb, Snow, or things on the sight line of the dish can cause Loss Signal or No Signal on the dish signal. To troubleshooting this, Just remove any obstructions from the sight line of your Dish Network TV dish.

5. Reset Your Dish TV Receiver

In case you experiencing No signal or Loss signal on your Dish TV Network receiver. After you might try all the troubleshooting stated above, then the next thing is to reset your Dish TV receiver. To do this, removed the power cord of your Dish TV receiver from the wall socket for 10 seconds, then plug it back.

If you owned Joey or Hopper receiver system, remove the power cord of the Hopper Dish receiver and plug it back. It may take up to 5 minutes to complete the reset process.

For more details visit: https://satgist.com/troubleshooting-how-do-you-fix-a-dish-tv-when-it-says-no-signal/