I called a technician, he changed the piston and ring but I still have the same problem. I've used 6litres of Oil in space of 1month.

space9880:
the Gen goes off cos oil level is too low and when this happens your rings and piston might be guilty. does the Gen smoke at all especially when you put it on?

Hi guys.

Please what could make Thermocool Hustler 3500MS consume much oil? There isn't any sign of leakage. I change oil once in every 10L I burn as the oil seems to dry up. Most times the gen goes off, this happens when the oil is dried. No much load on the gen just the normal electric bulbs and fans.

Am I to provide the Microwave Radio or it will be provided by them? What's the installation cost like?

Thevideoguy:
I think SmartCity Internet is better than all these. See internet.smartcity.com.ng available in Port Harcourt and Yenagoa.

enochogaga:


Thermocool is good product, if ur mind is in getting them go ahead, but both are 2.5 and 2.6kva

Thanks prof.

The description on the Thermocool Optima 3500es says it's 3.75kva/3kw Generator.

I opted for Thermocool because I found it somewhere on this thread that it has less to none counterfeit.

All I need is something that can serve me well. Like I said, your suggestion is welcomed.

WarriAproko:
go for heir thermocool tec gen major cost about 132k..that's what am using now

How many HP and KVA is this generator?

enochogaga:
Am here to give you any answer about fault on ur generators, and how to identify original generators.

Good day Prof,

I want to purchase these 2 generators

1. Thermocool Optima 3500es 3.75kva/3kw Key Start Generator

2. Thermocool Hermocool Generator - Ptr Sml Bobo - 2500ms 2.5kva/2kw

Are they OK in terms of quality, durability and efficiency?

My budget is 90k

Your suggestions are welcomed.

Please is Sumec Firman 6.6 kVA Generator - Eco8990es okay?

enochogaga:
Am here to give you any answer about fault on ur generators, and how to identify original generators.

Hello Prof,

I want to purchase a 4.5KVa manual starter generator and my budget is below 80k, what are your recommendations?

BlakKluKluxKlan:



Is this about Nitel/Mtel issue ?

Yes. We can start a campaign, get the world involved. All we need is someone who can put a quality right up, stating how many Nitel staffs had died and how many are suffering due to this inhumane treatment by the government.

Once that is done, a link would be shared, then those having access to the Internet would follow the link and protest until we are attended to.

I am willing to share the write up on these platforms if any write up is provided me.

The world must hear this.

http://theimpossibleinstitute.com
https://www.change.org

Use the sites above to start a campaign, mobilize supporters, and work with decision makers to drive solutions.

I just received an update.
All has been resolved. Nitel union has agree terms with the government.

arewaa:
AREWAA
Just like me, we aged pensioners of NITEL/MTEL are worried.
When is our verification coming up? Please when........ Is 9th Oct 2017 a reliable date?
We are waiting and will continue praying.

It won't exceed October by God's unfailing grace.

The Pension Transitional Arrangement Directorate (PTAD), will commence its second phase of verification in Lagos State from 18th – 29th September 2017. The third phase of the verification exercise will commence from 16th-21st October, 2017 in Oyo and Ogun States.
Civil Service Pensioners are to come along with both originals and photocopies of their employment records.

Please we all should be at alert. Don't listen to anyone who tells you he/she will help you facilitate anything regarding verification.

def recursive_factorial(n):
n = int(n)
if n <= 1:
return 1
else:
return (n * recursive_factorial(n - 1))

# print (recursive_factorial())


def iterative_factorial(n):
result = 1
for i in range(1, n+1):
result *= i
return result

# print (iterative_factorial())