₦airaland Forum

still available

still available

Still available

still available

still available

Hi All,

I have a 40 foot International American style flat bed trailer back for sale.

Made of Aluminium and Wood.

6 months old


Price: 1.2million

Call: 08033586504

;d

still available

still available

still available

still available

still available

still available

still available

;d

;d

;d

;d

waistbead:
Bros can it go for 1.4?serious buyer.08037064796.

Sorry bro,but your price is just too low.

still available

still available

still available

Hi

Kindly help check this VIN 3HGCM56324G706017

Thanks

still available

Get your VSAT kit today and start enjoying super fast broadband internet

still available

Come for inspection

still available

still available

Siena:
A turbo conversion is more than just bolting on a turbo. You'll need:

01) Turbocharger.
02) Custom exhaust manifold to mount the turbo.
03) Turbo oil feed from main oil gallery.
04) Turbo oil return (involves drilling and tapping the engine block, or the sump above the normal oil level).
05) Lower compression pistons, or thicker head gasket to lower compression cheaply).
06) Custom intake pipework for intercooler.
07) Intercooler (compact enough to fit behind your bumpers).
08) Larger fuel injectors (your standard ones won't give enough fuel under boost).
09) Custom exhaust front pipe (connects to turbo).
10) Custom engine map.
11) MAP sensor (that detects vacuum, atmospheric and boost pressure).
12) Different spark plugs ("cold-running plugs".
13) Electric auxillary water pump (if turbo is water-cooled).
14) Associated coolant plumbing (if turbo is water-cooled).
15) Uprated fuel pressure regulator (at least 3 - 4 bar).


You may be able to retain your standard pistons and compression ratio, as long as you don't intend to run more than 6 psi boost. But an ECU remap is a must, assuming the parameters will allow it. If not, you'll need a custom stand-alone engine management system, running alongside your standard ECU, to handle boost, fuelling and ignition timing.

If your engines have over 100,000 miles on them, I wouldn't recommend boosting them without a rebuild. At the very least, new piston rings, crankshaft and conrod bearings.

A MAP sensor allows your ignition timing to r[i]e[/i]tard by at least 6 degrees under boost, otherwise your engine will detonate like mad, and eventually self-destruct.

Good luck finding a Custom Tuning House in Nigeria willing to handle your project.

Siena, You BAD!!!
double tuale for you, much respect for the breakdown men,

still available

bump