₦airaland Forum

recommend you use vident diagnostic tool at http://www.obd360.com

i found this is a good website for Auto part catalogue
http://www.autoepccatalog.com

here UOBD2 share you how to check how many id 48 clone credits on your VVDI Mini key tool

1.Click on “Transponder clone” in new xhorse app.
2.Click on “ID48(96 bit) online calculation.
3.Click on “Available bonus points”.
4.Have free token, paid token, available bonus points.

Confirmed:
It is 99.99% safe to clone 48 chips. Still no one experienced car not starting problem after key duplicating.
Next question is where’s the best place to buy credit from?


UOBDII Official Blog All rights reserved 4 Steps to check credits on vvdi mini key tool for id 48 clone

http://www.uobdii.com

CK360 Easy Check Tester Features:

1.Remote control -frequency detection:
Frequency: 315MHZ, 433MHZ, 868MHZ
Distance: 0.1~ 1m
Cover ASK and FSK models

2.Key anti-theft chip detection:
46/4d /48/ 47/ 49/ 4A/ MQB A/ MQB B/ 8C/ 64/ 4C/ 13/ 12/ 11 and other common anti-theft chips

3.Mercedes infrared key detection:
Infrared key active detection
No need to press the button (except FBS4 system)

4.Intelligent signal detection:
Keyless entry, keyless start and other signal data flow

5.Remote control button battery detection:
For the ordinary remote control

for vehicle maintenance you can buy original diagnostic tool from this website:
http://www.obd360.com

I have Yanhua Mini ACDP with Module 2, 3,7,11 authorized, only need to solve the module read and write the code ISN DME. It's open but it doesn't do the job. Says unsupported in all models DME 1724/1725/172p


Finally Solved by the engineer:
How? here is solution:
1.Browse ACDP official site: http://www.acdpmaster.com/.
2.Click on "Resource Download".
3.Choose and download "Click the icon to download ACDP PC software (with resource bundle), shown as below.
yanhua-mini-acdp-unsupported -in-all-models-DME-1724-1725-172p-03
4.Put the above file into this path:
" Nanning Yanhua\PC-ACDP\WebResource\aliyun\CCDP_Web\en\DevFiles\Mini-ACDP".

Yanhua Mini ACDP Blog
Article from:https://yanhuaminiacdp..com/2019/04/yanhua-mini-acdp-supported-all-models.html

Here i found a blog special for Yanhua Mini ACDP,check here:
https://yanhuaminiacdp..com/

There are two options available when accessing the Autel MK908P Diagnosis section:
1. Auto Scan – starts auto scanning for all the available systems on the vehicle
2. Control Units – displays a selection menu of all available control units of the test vehicle
1
Auto Scan
The Auto Scan function performs a comprehensive scanning over all the systems on the vehicle’s ECU in order to locate fault systems and retrieve
DTCs. The sample operation interface of Auto Scan displays as above:
1. Navigation Bar
2. Main Section
3. Functional Buttons
http://www.uobdii.com/wholesale/autel-maxicom-mk908.html

Navigation Bar
1. List Tab – displays the scanned data in list format
2. Progress Bar – indicates the test progress

Main Section
A. List Tab
Column 1 – displays the system numbers
Column 2 – displays the scanned systems
Column 3 – displays the diagnostic marks indicating different conditions of the test result:
Indicates that the scanned system may not support the code reading function, or there is a communication error between the tester and the
control system.
Indicates that the vehicle control system has been detected, but the tester cannot accurately locate it.
Fault | #: Indicates there is/are detected fault code(s) present; “#” indicates the number of the detected faults.
Pass | No Fault: Indicates the system has passed the scanning process and no fault has been detected.
Functional Buttons
The table below provides a brief description of the Functional Buttons’ operations in Auto Scan:

Control Units
This option allows you to manually locate a required control system for testing through a series of choices. You simply follow the menu driven procedure, and make proper selection each time; the program will guide you to the diagnostic function menu after a few choices you’ve made.

The Function Menu options vary slightly for different vehicles. The function menu may include:
ECU Information – provides the retrieved ECU information in detail.
Selecting opens an information screen.
Read Codes – displays detailed information of DTC records retrieved
from the vehicle control module.

Erase Codes – erases DTC records and other data from the ECM.
Live Data – retrieves and displays live data and parameters from the
vehicle’s ECU.
Active Test – provides specific subsystem and component tests. This
selection may appear as Actuators, Actuator Test, or Function Tests,
etc., and the tests options vary depending on the manufacturer and model.
Special Functions – provides component adaptation or variant coding functions for custom configurations, and also allows you to reprogram
adaptive values for certain components after making repairs. Depending on the test vehicle, this selection may sometimes appear as Control
Unit Adaptations, Variant Coding, Configuration or something similar.
NOTE: With the diagnostic toolbar on top of the screen throughout the whole diagnostic procedures, you are allowed to make various controls of the diagnostic information at anytime, such as printing and saving the displayed data, get help information, or perform data logging, etc.

Xhorse VVDI Mini Key Tool Remote Key Programmer Support IOS and Android
http://www.uobdii.com/wholesale/xhorse-vvdi-mini-key-tool-programmer.html

Here is IProg Pro programmer support function list:
http://www.uobdii.com/wholesale/iprog-programmer.html

Airbag,carradio,dpf off, ECU,IMMO KEY, MIL TO KM, PINABS,PINCODE SMATRA3,PINCODE SENSOR SPEED LIMIT,ODO Adjust,EEPROM,MCU-Atmel,Fujutsu,Microchip,Motorola,Motorola912EN,NECV850,BLR,CAN,CRC_Cript,ibutton,sd_unlocker,test.

for auto repair tech and knowledge,i recommend you to this blog
http://blog.uobdii.com

Ohh,i found this blog share this guide on how to perform all key lost programming for Benz W211

Launch Creader 3001 Scanner Modes of OBDII Diagnostic

Mode $01 Request current powertrain diagnostic data.
Mode $02—Request freeze frame information.
Mode $03—Request emissions-related diagnostic troublecodes.
Mode $04—Clear/reset emissions-related diagnosticinformation.
Mode $05—Request oxygen sensor monitoring test results.
Mode $06—Request on-board monitoring test results for specific monitored systems.
Mode $07 — Request emission-related diagnostic troublecodes detected during current or last completed drivingcycle
Mode $08—Request control of on-board system, test orcomponent.
Mode $09—Request vehicle information.
Mode $0A—Request emissions-related diagnostic troublecodes with permanent status after a clear/reset emission-related diagnostic information service.
http://www.uobdii.com/wholesale/launch-creader-3001-diagnostic-tool.html

Digimaster 3 is the third generation multi-functional Automobile data adjusting equipment developed by Nanning Yanhua Electronics Co.,Ltd. It bases on a high performance hardware platform which takes high-speed CPLD
and the ARM11 processor as the core device.

Original Digimaster 3 also is called Digimaster III or shortly D3 works with various types of adapter you can easily achieve odometer correction, Audio decoding, airbag resetting, engine ECU resetting, IMMO, programming key for Benz &BMW etc

here is another option to get this Digimaster 3
http://www.uobdii.com/wholesale/digimaster-3-digimaster-iii-digital-odometer-correction-master.html

TMPro 2 Key Programmer Activating new software modules is very easy. Connect hardware and start software. Go to “Purchase modules” – “Order new modules”.
Software opens screen with 2 windows – left and right.
In left window – “Available modules” – are shown all available for purchasing software modules.

With double click on desired software module you can move it from “Available modules” window to “Order list” window. You can add as many as you wish software modules in “Order list”. Also you can move any module from “Order list” back in “Available modules” again by double clicking on it.
When your selection is ready, press “Order” button. Software will save on disc file with your order.
You must send to me this file by e-mail.

http://blog.uobdii.com

OBD2 Scanner:
http://www.uobdii.com

if you look for some car key programmer,check this item:
http://www.uobdii.com/wholesale/auto-key-programmer/

OBDSTAR X300 DP PAD Plus Update Announcment!
Update Announcement on Aug 31st 2018 2018-08-31

GM/BMW ECU Programming
GM/Peugeot/Volvo ECU Clone
Toyota G&H chip/smart key all keys lost via OBDII
Benz S series cluster calibration (W221/W222/C216)
BMW FEM/BDC key programming (CAS coming soon)
Jeep Cherokee pin code reading & add key (2010-2016)
GM/Opel pin code reading via OBDII (most vehicles in 13-17)
Renault Dokker/Lodgy/Logan 2013-/Sandero 2013-/Koleos 11-16/Symbol 2013-2018 key programming
Hyundai/KIA new pin code reading (46/47/8A chip smart key)
Volvo pin code free & all keys lost via OBDII (non-proximity system)
Jeep challenger pin code reading & add key (smart key system 2014-)
Ford key programming for F150/Mondeo/Mustang/Explorer 2015- (within 2mins)
VW/Audi/Skoda/Seat MQB cluster calibration & NEC 24C64 2014- key programming
Peugeot/Citroen BSI & dashboard cluster calibration ( CONTINENTAL BSI-Q0X/ JC BSI04EV-K0X)

http://www.uobdii.com/wholesale/obdstar-x300-dp-pad2-key-master-plus-full-configuration.html

Here are some topics about benz:
http://blog.uobdii.com

OBDSTAR H111 Opel key programmer covers more than 90% models of Opel including old and new models. It can easily extract PIN CODE from BCM by selecting option “Auto” or “Manual”. In addition, it adopts the hardware and the shell of OBDSTAR H series, which keeps fast and stable software running. Comes with OBDII function and cluster calibration for some models of Opel, H111 is technical, professional and comprehensive auto key programmer. Compared with similar products, it covers more vehicle models, more functions and is easy to operate, which can be widely used in auto after market.
OBDSTAR H111 Opel Auto Key Programmer
http://www.uobdii.com/wholesale/obdstar-h111-opel-key-programmer.html

This article show a guide on how to use CGDI product:CG Pro 9S12 to add key for BMW CAS4.


BMW CAS4 anti-theft buggy key increases,needs to read to configure the key,read CAS 4 anti-theft data to load data matching keys.

Step 1:Operating [b]CG-Pro to Read CAS4 anti-theft data[/b]

CAS4 anti-theft computer module style.

CAS4 anti-theft computer module

Wiring diagram

Physical connection

Connect to CG Pro equipment

Decrypt successfully and save the data


Step 2:Operating CG-Pro to Match the New Key

Click on the “CAS4 Key Match”

Load CAS4 data read by CG-Pro

Select data and click open

Display relevant information

Select the key position that need to be configured ,click to generate the dealer key,put in the blank key,and determine the next step.

New key programming successfully.

CG Pro to Add New Key for BMW CAS4 (13)

After learning,it can be used normally.



[url=This article show a guide on how to use CGDI product:CG Pro 9S12 to add key for BMW CAS4.



BMW CAS4 anti-theft buggy key increases,needs to read to configure the key,read CAS 4 anti-theft data to load data matching keys.



Step 1:Operating CG-Pro to Read CAS4 anti-theft data

CG Pro to Add New Key for BMW CAS4 (1)

CAS4 anti-theft computer module style.

CG Pro to Add New Key for BMW CAS4 (2)

CAS4 anti-theft computer module

CG Pro to Add New Key for BMW CAS4 (3)

Wiring diagram

CG Pro to Add New Key for BMW CAS4 (4)

Physical connection

CG Pro to Add New Key for BMW CAS4 (5)

Connect to CG Pro equipment

CG Pro to Add New Key for BMW CAS4 (6)

Decrypt successfully and save the data



Step 2:Operating CG-Pro to Match the New Key

CG Pro to Add New Key for BMW CAS4 (7)

Click on the “CAS4 Key Match”

CG Pro to Add New Key for BMW CAS4 (

Load CAS4 data read by CG-Pro

CG Pro to Add New Key for BMW CAS4 (9)

Select data and click open

CG Pro to Add New Key for BMW CAS4 (10)

Display relevant information

CG Pro to Add New Key for BMW CAS4 (11)

Select the key position that need to be configured ,click to generate the dealer key,put in the blank key,and determine the next step.

CG Pro to Add New Key for BMW CAS4 (12)

New key programming successfully.

CG Pro to Add New Key for BMW CAS4 (13)

After learning,it can be used normally.



http://www.cgdishop.com]http://www.cgdishop.com[/url]

LONSDOR JLR IMMO Registration and Activation:

(1) Please enter the site: http://u.lonsdor.com/jlrimmo/login
① Login
Users with an account of a Lonsdor tool: input account, password and verification code to login.
Users without a Lonsdor account: click on [Register] and follow prompt messages to complete registration, then log in.
② Device bound to an account
After login success, check system prompts when device boots. Input the device No. & registration code as per prompts, and set up a password for the device. Click on [Submit] to bind to the device.

(2) After bind device successfully, enter the site: http://u.lonsdor.com
① Click on the JLR-IMMO button, click on [Get activation code], confirm that device No. shown on the webpage is consistent with actual device No. Click on [Submit] to get activation code.
② Input device No. on webpage to the device to activate it.

Below is the Lonsdor JLR IMMO Support Car List:

1. LandRover 2008-: Immobilizer and smart key
2. LandRover Discovery3: Immobilizer
3. LandRover Freelander: Immobilizer and smart key
4. LandRover Freelander2: Immobilizer and smart key
5. LandRover Discovery4: smart key
6. LandRover Evoque: smart key
7. LandRover Defender: remote
8. LandRover new models KVM case’s software version: FK72
9. LandRover new models KVM case’s software version: HPLA
10. Jaguar XF: smart key
11. Jaguar SJ: smart key
12. Jaguar F-TYPE: smart key
13. Jaguar X-TYPE: Immobilizer
14. Jaguar Soverign: Immobilizer
15. Jaguar XJ6: Immobilizer
16. Jaguar XJ8: Immobilizer
17. Jaguar XJR: Immobilizer
18. Jaguar XK: remote
19. Jaguar XKR: remote
20. Jaguar new models KVM case’s software version: FK72
21. Jaguar new models KVM case’s software version: HPLA

SBB Pro2 Key Programmer V48.88
1.SBB PRO2 Key Programmer Software Version: 48.88
2. Language: English,Italiano,Deutsch,Francais,Espaniol,Portugues,Turkish
3. It is without limited tokens.
4. Support Toyota G Chip
5. It is a new generation of the SBB Key Programmer, the replace version
6. Support Toyota, Honda and Ford ... Year 2017
7.SBB V33.01 works to2011.12, SBB V46.02 works to 2015.12.


V46.02 SBB Key Programmer
1. Latest Software Version: 46.02
2.Suppoted Multi-Language: English/Italian/German/French /Spanish /Greek /Portuguese /Turkish /Russian
3.Support Toyota G Chip
4.Support Pin Code Reader Function for Part of Cars
5.Support Toyota,Honda and Ford to Year 2014
6.It is a new generation of the SBB Key Programmer

Conclusion:SBB Pro2 Key programmer is more powerful than SBB Key Programmer

OBDSTAR X300 DP PAD2 Hardware Features:
https://www.uobdii.com/upload/pro-md/18062415298944609690.jpg
1. The built-in VCI box offers more stable communication.
2. The 8" touch screen offers better vision experience.
3. Allow the user to charge by the OBD port of car. Not like the X300 DP 7" Pad, which need to be 100% charged before use.
4. With specialized toolkit, high grade and practical.
5. Industrial -grade design, comes with the silicone sleeve
6. The back bracket allows the user to hang it on the steering wheel or stand on the table, which brings great convenience to the operator.
7. Comes with Toyota Lexus Emulators (The first 4 pieces are already released, and the 5th one is under development)
8. The following 3 adapters are integrated into the X300 PAD plus: EEPROM /PIC 2-in-1 adapter, RFID adapter (VW Audi 4th / 5th IMMO programming and other cars e.g Porsche, BMW, Fiat etc.) and Renew Key PCF79XX adapter.
9. Adds the clip for reading SOP 8PIN EEPROM.
10. Adds the cables for reading ECU via OBD (Used to clone ECU and active the switch).
http://www.uobdii.com/wholesale/obdstar-x300-dp-pad2-key-master-plus-full-configuration.html