₦airaland Forum

GDS VCI for Kia & Hyundai (Red/Blue) with Trigger Module Firmware V2.07 Software V2.02
1. Latest firmware: V2.07, Software V2.02
2. Package come with USB Dongle, software installation more convenient
3. GDS VCI come with Trigger module
4. The only OEM diagnostic tool for Hyundai and KIA.

GDS VCI for Kia & Hyundai (Red/Blue) with Trigger Module Firmware V2.07 Software V2.02

GDS VCI Diagnostic Tool is an advanced service system that provides comprehensive coverage for all Hyundai vehicles including all Hybrid cars. GDS provides complete diagnostics, analysis and reprogramming capabilities as well as a huge library of technical, service and repair information. And now buy it. you can get NEW kia GDS software free.

GDS Software Installation Tips:

1. Kia and Hyundai software can not be installed on the same computer. Before install Kia software, it must install hyundai master dvd, otherwise it will cause the softwre install not success
2. Never try to update the software, otherwise the circuit board will be burned, need return it back for repair,and you will pay all the maintenance cost and shipping cost back and force, because such damage is not free in the warranty policy.

GDS VCI Diagnostic Tool for KIA Hyundai Features:

1) Completely Integrated Diagnostic System with User Specific information & settings
2) Complete Technical Service Information
3) Comprehensive & Customized Diagnostic Solution
4) Guided Troubleshooting Procedures
5) Mobile Data-recording Function
6) Real-time Software Management

Trigger Module (Flight record)

Intensified recording function of vehicle conditions at idling or driving
Recorded data VCI can be reviewed and analyzed precisely and the terminal
Exact Analysis of data trend
Data storing in PC and sharing for remote control diagnosis and further diagnosis
Actuator Driving
Sample Operation and multi-record with large memory up to PC HD memory
Easy to use and fast procedure

http://www.obdii365.com/wholesale/gds-vci-with-trigger-module.html

Since there is little information and review about the clone Actia Multi-diag Access J2534 Pass-thru, I decided to post my own experience.

Where I purchased the J2534 Pass-thru?

Multi-diag VCI 2013-Ⅱpass-thru (French version), € 239 no shipping included from diyobd2.fr (超链接)
http://www.diyobd2.fr/wholesale/ii-2013-multidiag-access-j2534.html

How many days packed?

The package arrived at my door 4 days later. Package including VCI main unit, DB25 to OBD-2 Male cable, OBD2 OBD2 cable, DIN6 to USB cable and DIN6 to DB9F cable:

Day 1 after purchase:

First get the software installed and activated on a Vista Notebook by following the video installation guide:

https://www.youtube.com/watch?v=OM5uAU0jumo
But the device did not recognize the software. There was no communication between computer and device.
Then I contact the didobd2.fr dealer, the technician warns me to install Multi-diag VCI software on Window XP or Win 7 laptop. So I installed VCI on Virtual Machine running XP home acer laptop and it worked.

NOTE: It is very important to disable network and any anti-virus software programs before installing VCI.

Renault Clio was my first subject to observe, I connect the Multi-diag Pro to under the dashboard steering side OBD connector. It helped erase an engine code, reprogrammed mutlifunction steering angle sensor, code injector. Then VCI enabled to detect some parameters. Here are some pictures I taken. I figured out that actia multidiag can not only do some basic diagnosis, but also write it as the official tester ecu for any updates, drivers.


The first experience was successfully, but I realized that it ran slow than I imaged. So I decided to dissemble the device and check what the PCB inside look likes. I googled and found a little tutorial on MHHAUTO forum to modify the PCB to make it works faster. Here is the modified PCB.


Day 2 after purchase:

Second vehicle I tested was a BMW MINI 2011. One client took his car to my garage because the airbag light constantly flashed. I tested it with VCI but no code stored. I checked some other parameters and all fine. Then I disconnected the battery, and did a battery reset for half an hour. The
SRS light went off finally.



I have tested other vehicle models, Opel, BMW X5, Citroen C5, Pug 301, American Ford, Audi etc later, mainly French and American brands. I am not sure how it works on Japanese brands.

I still learning and testing other models and will add if necessary.

BMW engineering software (INPA or BMW ICOM ISTA ISTA-D) have lots of coding possibilities. Here is the instruction on bleed E90 ABS unit brake with INPA software.

Run INPA software. (With INPA cable plugged or within ICOM ISTA ISTA-D software)
Select vehicle model: E46

Select control module: Chassis

Select DSC MK60

Select Activate (F6)

Call someone to put pressure on brake pedal

Select either F2 or F3 (ABS FL RL or FR RR) depending on which one you are bleeding
Open the bleed value when hear the ABS buzz

It will then make a second noise where is activates the valves at which point the pedal will start going down in pulses and the fluid will start coming out the caliper.

Repeat the previous procedure.

http://blog.diyobd2.fr/how-to-bleed-bmw-e46-brake-abs-unit-with-inpa-software/

there are lots of instruction document download, including user manual, vehicle list, update guide etc in diyobd2 webpage
http://www.diyobd2.fr/wholesale/sbb-key-programmer-v33-immobiliser.html

The software and firmware version of K-TAG KTAG ECU programmer has been frequently discussed.

ⅠThe following part deplores the Clone K-TAG master version software and firmware version, and offers free software download for each link.

1) Free download clone K-TAG K-suite V1.89 (firmware 5.001) software
http://down.diyobd2.fr/k-tag-softwear-v1.89.zip


2) Free download clone K-TAG K-suite V2.06 (firmware 5.001) software
http://down.diyobd2.fr/KSuite-v2.06.zip

PCB inside

3) Free download clone K-TAG K-suite V2.10 (firmware 5.001) software
http://www.obdbox.com/download/Setup2.10.rar


Software version:

NOTE:
1. Computer system: Windows XP (SP2 is better)
2. Disable any anti-virus software before install K-TAG software.
3. Check in K-suite help folder C:\KSuite 2.06\Help. The help files must be the same language as the language you selected when you installed K-suite. For example, if the help files are in German but you select English when installed, the help files will not show when select a specific ECU type. Change language to German Help files will show or copy to folder C:\KSuite 2.06\Help all of help files from DVD.

ⅡHow to unlock K-TAG tokens limits or reflash the CPU chip?

Download the tutorial instruction here:
http://down.diyobd2.fr/ktag-j-link-v8-add-tokens.zip


Ⅲ Clone K-TAG K-suite V1.89, V2.06, V2.10, which is better?

According to K-TAG users and diyobd2.fr engineers’ tested result, K-TAG V1.89 with firmware 5.001 works 100%.

V2.06 works pretty well on an EDC17C41 but fail to test on some EDC17.

And K-TAG V2.10 is newest clone and support many protocols (F -series BMW etc) more than 2.06. K-tag k-suite V2.10 adds warning, notice, recommendation, instruction, pinout, etc.

K-TAG engineers have successfully tested K-TAG V2.10 on EDC 17 BMW, EDC17 DURAMAX, EDC17 FAL, EDC17 FORD, EDC17 DEUTZ, DDE8 BMW MINI etc. Here is the free instructions guide.

K-TAG V2.10 User manual free download
http://obdbox.com/download/ksuits.help.rar

Detail K-suite list, please check diyobd2.fr webpage.

OBD365 provides the stand-alone Miracle A7 key cutting machine software download link.

Language: English

Computer system:
Windows XP operating system

Miracle A7 key cutting machine functions and features:

Built-in internal battery enables key cutting without external power supply.
Both standard and laser key cut. Cuts the both standard keys and laser keys in one system
Light-weight(13.5Kg) and compact sized machine for easy carry


Both decoding and cutting are available. Decoding converts decoded information to original bitting with its electric tracer.
Retrieve and cut keys using embedded LCD and keys.
Hundreds of key data are stored in an internal memory.
Automatic key measurement
Automatic cutter length sensor
3 axes
One clamp for holding all types of keys
Support with various power source (portable battery, vehicle cigarette cord, AC, etc)
Just directly plug into vehicle cigar cord. (no inverter is needed)
Built-in battery enables portable use of the machine.
All range of AC source is supported from 100V to 240V at 50/60Hz.
Bright LED light for night
Easy data management of user-defined key
Bright LED light helps easy night work.
Automatic cutter length sensor

Free download Miracle A7 key cutting machine software
http://down.obd365.com/miracle-a7-key-cutting-machine.zip

Free Download Miracle A7 key cutter user manual
http://www.obd365.com/upload/service/user-manual-for-korea-miracle-a7-key-cutting-machine.pdf

Miracle A7 key cutting machine
http://www.obd365.com/wholesale/korea-miracle-a7-key-cutting-machine.html

Equipment:
Mercedes Benz MB SD Connect C4 Star diagnostic system (SDS)
Dell D630 laptop

Who need to enable Mercedes Benz Telephone buttons on the steering wheel?

If you have changed out form an Audio 20 to an aftermarket head unit with a steering wheel control module for a phone, a keypad on the centre stack, and a telephone function button.

Instructions in DAS Developer Mode:

Install and activate the software. Software is pre-installed and activated if you get the MB SD C4 multiplexer and Dell D630 laptop as a bundle package
Connect MB SD Connect C4 diagnostic system with car via OBD port
Run MB SD C4 DAS software
Select vehicle model
Select Control units groups
Select Information and communication
Select ICM Instrument Cluster
Select Control unit adaptations
Select Customer specific settings
Press F2 to accept the SCN prompt
Change IPOD: Operation via multifunction steering wheel to POSSIBLE
Press F5 to save the changes to the car
Press F3 to start the transfer
Press F2 when precious procedures are complete
Click OK to reset message
Click F2 back to Control unit adaptations menu

http://blog.mbstarshop.com/2015/02/10/activate-benz-telephone-buttons-on-the-steering-wheel-with-mb-star-diagnostic-tool/

GM Tech2 OBDⅡdiagnostic scanner has strong capacities that is possible to project multi programming functions, cruise control included.

But some users cannot/fail to enable cruise control settings with Tech2 scan tool. Take an example of a GM Tech2 owner, Here is how he did it:

1. Connect GM TechⅡdiagnostic tool to car via OBD port
2. Select Vehicle Control Systems, and navigate to Computer/Integrating Systems
3. Select Modules Replacement/Setup
4. Follow the system screen prompts, but he cannot see cruise control option

So he held a view that GM Tech2 scan tool is not possible to activate cruise control/ has no cruise control options.

But actually, GM tech 2 would make it work.

OBD365 here provides all GM Tech 2 OBD2 scanner cruise control options:

Cruise Control – Body > Instrument Panel Cluster > Special Functions > Input Tests
Cruise Control – Body > Instrument Panel Cluster > Special Functions > Lamp Test
Cruise Control – Body > Instrument Panel Cluster > Special Functions > Status Indicators Test Cruise Control – Body > Powertrain Interface Module > Special Functions > Output Controls Cruise Control – Powertrain > Special Functions > Engine Output Controls
Cruise Control Active – Body > Instrument Panel Cluster > Special Functions > Input Tests
Cruise Control Active – Body > Instrument Panel Cluster >Special Functions>Status Indicators Test
Cruise Control Cycle – Powertrain > Special Functions > Engine Output Controls > Cruise Control
Cruise Control Options – Powertrain > Special Functions > Option Reprogramming
Cruise Disable – Powertrain > Special Functions > Engine Output Controls
Cruise Enable – Powertrain > Special Functions (Natural Gas) > Engine Output Controls
Cruise Enable – Powertrain > Special Functions > Engine Output Controls

If you cannot find cruise control options, try another way around.
http://blog.obd365.com/2015/02/23/gm-tech%E2%85%A1tech-2-diagnostic-scan-tool-cruise-control-options/

a good document with lexia pp2000
http://www.obd-software.com/program-peugeot-new-key-lexia3-pp2000-diagnostic-tool/

This MPPS V16.1.02 is the newest professional ecu chip tuning tool, completely working through obd2 port, no need soldering or connecting cables, easy and high efficiency.

Top 6 Reasons to Get Mpps V16.1.02:

1. The MPPS V16 modern interface that allows you to read and write memory from the on-board computer through the diagnostic connector.

2. Supports the latest drivers EDC16, EDC17, MED9.x, Siemens PPD1 / x, EDC15, ME7.xi much more ...

3. Professional services, without unnecessary boxes and wires.

4. All the electronics to OBD2 connector.

5. New cars have been added

6. Support multi-Language: Afrikaans/ Albanees/ Bahasa Melayu/ Cech/ Cymraeg/ Deutsch/ Esti/ English/ Espanol/ Filipino/ Finnish/ Francais/ Galego/ German/ Hrvatski/ Indonesia/ Italiano/ Kiswahili/ Latviesu/ Lietuviskai/ Magyar/ Malti/ Nederlands/ Norsk/ Polska/ Portuguese/ Romanian/ Slovencina/ Slovenski/ Srpski/ Suomea/ Svensk/ Turkish

Carlist download

Mpps V.16.1.02 Features:

1. Recalculation of checksum
2. Read / write flash
3. Requires Windows XP sp2

http://www.obd365.com/wholesale/newest-mpps-ecu-chip-tuning.html


https://www.youtube.com/watch?v=Wm41MYtBfH4

Renault CAN Clip Diagnostic Interface V145 is designed to diagnose Renault cars models including automatically test computers, reprogramming, the airbag test all Renault models and other functions. The new version V145 is supported multiple languages.

Languages:
French, English, German, Brazil, Denish, Spanish, Finnish, Italian, Norwegian, Dutch, Portuguese, Romania, Sweden.

Renault can clip crack steps? 1. After finishing the installation, do not run your Clip 2. Copy RSRwin.ext file C: \ CLIP_X91 \ Lib \ Application \ 3. Then run your video, choose "Register Now." And in the next window, select "NO"! 4. Use the key to Register

Features:

- Multiplex network testing
- CAN network testing
- Computer system function tests
- Petrol / diesel injection system tests
- Airbag system tests
- Interconnection unit tests
- ABS / ESP system tests
- test systems air conditioning
- analysis tool (OBD tests)
- Module reprogramming


http://www.eobd2.fr/interface-de-diagnostic-renault-can-clip-v106-444.html


https://www.youtube.com/watch?v=6kGlpk9_SE0

the cheapest way is to get a cheapest scan tool to reset the error codes
http://www.obd365.com/wholesale/mini-elm327-interface-viecar-obd2-bluetooth.html

Get a techstream cable , cheap $25, easy to use and get rid of these error codes and turn off alarm and some other settings
http://blog.obd365.com/2014/12/02/achieved-mini-vci-techstream-customize-ecu-setting/

I wonder if it is possible to get these error codes read by a diagnostic system/scan tool, like this honda him diagnostic system
http://www.obd365.com/wholesale/honda-hds-him-diagnostic-tool-with-double-board.html

ICOM HDD has released to newest 2014.7V with bonus engineer programming software.

http://www.obd365.com/wholesale/bmw-icom-ista-d-software-hdd.html

CN900 is the best 4D chip copier. Here are some screen shot of the tool

1) Can directly copy 4C and 4D chips, can copy such as Toyota 4d67.
2) Can update online.
3) Two months later, it will be able to copy ID46 and Toyota G chip.
4) CN chips can be copied many times.
5) Can recongize locked ID48 and can unlock ID48.

http://www.aobd2shop.com/wholesale/oem-cn900-auto-key-programmer-2367.html

Uobd2 VDM UCANDAS WIFI Diagnostic Tool relaese to V3.8 With Honda Adapter


1. Software Version: 3.8 [ If You Need The Software,You Can Download it Directly From Official Website] Software Name: UCANDAS_UI_V3.8z
2. Languages: English/ French/ Spanish/ German/ Turkish/ Italian/ Korean/ Russian / Finnish / Arabic / Hungarian/ Czech/ Portuguese/Polish/Chinese .(Besides English,you can have another two languages at most, If you want to add language for your VDM UCANDAS, please provide us serial number and language you need)
3. WIFI and USB Connection: The WIFI direct distance is less than 50M
4. Online Update: you can go to " http://www.ucandas.com/ " to update your device. After one year, you need pay about 80USD for each update
5. VDM UCANDAS can support new computer system: Windows XP, Windows 7, Windows 8. No WP8/Win8 RT
6. Our Customers feedback VDM UCANDAS better than Autocom
7. No need Activation or Register before using.
8. VDM UCANDAS Covers 47 Car Brands:
European Car Models: Audi, Benz, BMW, Citroen, Fiat, Ford EU, Jaguar, Lancia, LandRover, MINI, Opel, Peugeot, Porsche, Renault, Saab, Seat, Skoda, Smart, Vauxhall, Volvo, VW.
Asia Car Models: Acura, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Perodua, Proton, Subaru, Suzuki, Toyota,Daihatsu,Daewoo,GM
Australia Car Models: Ford AU, Holden
USA Car Models: Chrysler, Ford, GM.,JEEP, SCION
China Car Models: Chery, Geely, GWM
9. Newly Added Honda Adapter for Free
http://www.uobd2.net/wholesale/ucandas-wireless-automotive-diagnosis-system.html

domack99:
First you need to run a scan and get us the code thrown by the ECU. You can get ELM327 with torque lite or car doctor on your Android phone you will be able to get the code.

Can you please explain more on the jerking pattern, if you are experiencing the jerking only when changing from park to drive, park to reverse, reverse to drive etc while the car is not moving, then you might have to check your engine and transmission mount. This type of jerking issue will never throw a code.

Removing the filter is not that difficult, need to remove the filter, clean it or replace it and do another refill and this time please confirm the smell and colour of your ATF.

Can you just states how to use elm327 adapter to project the function

SKP900 has newly released to the latest V2.8 support all cars lifelong free update

1. Support almost all vehicles in the world
2. Don't need pincode when programming keys for many vehicles
3. Can read pin code for many vehicles, only a few vehicles need to get pincode from other place.
4. No tokens needed. You can program as many cars as you can.
5. Low price to meet the economic crisis, cost-effective.
6. Provide lifetime Free Update Sevice,No limitation about update times now
7. Support TOYOTA G CHIP.

V2.8 add these new features:
1. NISSAN X-Trail SMART KEY Program 2013-
2. MAZDA CX-5 SMART KEY Program 2013-
3. FORD KUGA SMART KEY Program 2013-
4. FORD FOCUS SMART KEY Program 2013-
5. CHEVROLET TRAX SMART KEY and REMOTE Key Program
6. China model: Young Man lotus L3
7. China model: DongFeng FengShen S30
8. China model: DongFeng SUCCE
9. China model: FAW WeiZhi

SKP900 V2.8:http://www.uobd2.net/wholesale/superobd-skp-900-hand-held-obd2-auto-key-programmer.html