₦airaland Forum

I received a job interview and it is this morning by 9am....please I need confirmation from anyone who have experience about this because I really don't know how real it it

Good Afternoon Adedayo! You have been selected for an interview with the CEO of Medpro Logistics at 248 Nnebisi Road Opp Wema bank Asaba, Delta State on the 18/03/21. Time 9.0am prompt

I received a job interview and it is this morning by 9am....please I need confirmation from anyone who have experience about this because I really don't know how real it it

Good Afternoon Adedayo! You have been selected for an interview with the CEO of Medpro Logistics at 248 Nnebisi Road Opp Wema bank Asaba, Delta State on the 18/03/21. Time 9.0am prompt

AutoMoTech:
Very sorry i responding late.
I had actually typed the reply. Just checking the thread and i discovered I didnt post it.
Regardless. Keep am open mind.
Your Mechanic might be right or wrong.
Diagnosis is what will help point you in the right direction.
However i have some questions.
After changing the cam sensor, were you still having the misfires?
Also did you confirm the circuit integrity of the wiring from the ECU to the camshaft sensor?

I believe the ECU is probably limiting engine power to 3000 RPM due to the misfire it is recording.
Kindly do the following;
Scan again to ensure there are no other codes causing the misfire.
Try confirm the wiring to the Camshaft sensor.
Confirm the sensor itself is good.
Then check the ECU for any abnormailities.
If all is good then the cause of the misfire might just be mechanical....

After the Cam sensor is changed, the engine still misfire and I told him am not ready for the brain box now, but to my surprise the following day when I drive the car to take my kids to clinic, the misfire stop the blinking stop too but the engine check light remain on the dashboard, so I will be going to rescan the car to be sure everything is fine and check all the thing you mention here.
Thank you

AutoMoTech:
Good morning.
Sorry about your ordeal. You need a very competent Technician to help handle this issue.
Where is your location?

Am in Warri, Delta State

Good morning all,
Please am having serious issues with my Honda Accord 2009 model, 2.4L, 4 Plug Engine......all of a sudden the check engine light started to blink anytime I try to accelerate and once it started blinking the car will not be able to fire up pass 3000 Rpm, I have diagnosed it and it say cylinder 2 and 3 random multiple misfire and also error code P0341 Cam sensor bank A misplaced error detect. I have change the sensor, service the valves, nossle, change the fuel pulp, replace the gasket, change the oil pressure switch and still yet the check engine light is still blinking, infact I have spend a lot and it has not been fix and now the mechanic is telling me that it has to be Brain box and I totally disagree with him.
Please at this junction I don't know what else to do about 3 different mechanics have work on it and couldn't fix it..
Please I urgently need your assistance here and I will be so glad if anyone who has experience anything of such can be of help to me with the solution.
Thank you
Waiting for your reply