do you know that with the right tools and software you can reach your church community online with better video and audio quality without spending a fortune .

Reach members during emergency pandemics like COVID-19, which we’re currently experiencing.

Allow members who are sick or injured, too old to make it in person, or have a disability that makes it difficult to travel to watch your service.

Live streams help members who are traveling and want to continue to participate in their own faith community.

Extend your reach beyond your local community and help people to connect with one another.

Create a live stream of your sermon or broadcast a private event for members of your congregation who cannot attend.

Record your live streams and make them available as video on demand. This is also a great way to lock in the experience of each event forever. It allows people who missed the live event to watch it later on their own time.

There are a variety of ways you can go about setting up your system.

Want more information? Call 07038572120

An e-office (electronic office) system is an Information Technology system employed to cater for an organisation’s administrative needs, especially in the areas of data processing, information sharing and communication activities. The system uses some forms of telecommunications in the running of an organisation’s general operations. It is a virtually automated system usually intended to capture the use of integrated computer and communications systems to support administrative procedures in an office environment. The interest in this area of study was motivated by the desires to curtail the problems, such as bureaucracies, documentation errors and data losses, etc., that are often experienced in the manual approach or method of conducting organisational businesses

At Digital Inspiration we bring our clients Peace Of Mind by delivering international standard electronic business management software to improve our customers’ business and lives by providing exceptional services that enables them to efficiently manage their vital documents and optimize their business process to achieve a competitive advantage

Call us today 07038572120

Check it out below
Username: admin
Password: admin
http://eoffice.digitalinspiration.com.ng/admin

WHAT IS THE HDPE PIPE?
HDPE Pipe, Polyethylene (PE Pipe) are sorted by strength classified according to the intensity of the earlier technological developments. HDPE Pipe pressure classes that can be made between Pn4-Pn32 and the production of the desired diameter and size of HDPE pressure pipe system has undergone many tests in 1950, particularly in the carriage of drinking water. After the result of these tests of HDPE Pipe, if all reports are positive then it has no harmful effect on human life. One of today's most widely used pipe is HDPE piping systems which is economical, easy in handling, efficient performance, easy method of coupling. Is quite useful.

[img]https://drive.google.com/open?id=16IgYcu9BcI3cvduZg-CmFYcTHh0PRoXF[/img]

Pk critical collapse pressure bar
Ec Modulus of Elasticity
U Number of cross thermoplastics
https://drive.google.com/open?id=1wTiHSB9vHzuzE1PIGvjJ64Dw38YcuT7K
S Thickness (mm)
rm The average radius tube (mm)

RAW MATERIAL OF POLYETHYLENE PIPE
Polyethylene Pipe, Pe 32 class is developed in 1950 with improving technology and low density. 3rd Generation PE 100 Polyethylene raw materials are used in drinking water pipelines, desalination plants, biological treatment plants, swimming pool piping, sea discharge lines, gravity flow water lines, gas stations , irrigation lines, compressed air lines, cooling-heating lines, pre-insulated sheathing for pipes. Because Low Density Polyethylene Pipe is economical and has high-performance in many areas, such as sewer lines has been a solution. (C2H4) has the general formula of crude oil of 97% polyethylene and is a thermoplastic polymer as shown. The production of raw materials, entirely depends on the availability and price of crude oil. Polyethylene density is divided into three main groups according to their crystalline structure percent.
• Low density polyethylene raw material (LDPE)
• Medium density polyethylene raw materials (MDPE)
• High density polyethylene raw materials (HDPE)

According to other types of raw materials as well as their field of high performance and long life due to the strength of economy most preferably 97% of the product which is used crude for the production of the polyethylene raw material. So the production of polyethylene raw materials, the availability and the price depends entirely on crude oil. It also has many superior properties compared to other thermoplastic polyethylene. The main ones are
* HDPE Pipe is resistant to weather conditions
* HDPE Pipe High resistance to tearing and pressure
* HDPE Pipe Despite high resistance to stress cracking
* HDPE Polyethylene Pipe -30 And -60 degree to strength
* High Density Polyethylene Pipe have corrosion resistance
* Easy and reliable assembly of HDPE Pipe
* In HDPE Pipes Lower level compared to metal pipe friction losses
* HDPE Pipes, Reduced flow noise
* Electrical full insulation, it is a good thermal insulation
* HDPE Pipes are non toxic.
* HDPE Pipe is suitable for radioactive waste.

Bimodal Polyethylene / PIPE
Polyethylene for pipes with advancing technology began to be produced on 1950 II. Polyethylene generation until 1970 and in the 1990s began to be used in the biomedal period polyethylene was formed. Polyethylene should demonstrate excellence in strength and workability is provided by the bimodal polyethylene to accommodate these features Bimodal Polyethylene known titles can add a few more outstanding features. These are:
* Resistance against cracking tube is perfect.
* It is spacious and provides a cross-section.
* Increases the volume of flow of fluid to pass through the pipe.
* Deflection making tendencies are low.

https://drive.google.com/open?id=1wTiHSB9vHzuzE1PIGvjJ64Dw38YcuT7K

Ultraviolet (Sunshine) Resistance
In the absence of any physical and chemical protection from UV radiation is affected polyethylene and weakens. Thanks to between 2-3% of carbon black incorporated into the UV input during the production of the weakening cut is avoided.

Classification of Polyethylene Pipe
MRS; Polyethylene pipes and classified by the raw materials used in the production of attachments. MRS material strength values of 20 ° C is also shown by the internal pressure for 50 years
https://drive.google.com/open?id=1wTiHSB9vHzuzE1PIGvjJ64Dw38YcuT7K

* HDPE Pipes ( Polyethylene pipes) working conditions in, temperature, pressure and fluid properties.
* HDPE Pipe is produced from chemical reactions of rawmaterials.
* Soil structure used during the pipe-laying for PEHD pipes that suits to conditions.

PE 100 pipes are available in a minimum of 50 years of life temperature of 20 oC according to life flow calculation. Polyethylene pipe with chemical bonds that makes connection with HDPE material can vary.

Advantages of HDPE Pipes
HDPE pipes with a history of 60 years of technological developments that have positively influenced and until today has become one of today's most preferred tube.
• HDPE pipes; It maintains the general properties of the fluid inside.
• HDPE pipes; moss on hold due to the inner surface can be used in drinking water systems.
• HDPE pipes; Due to its chemical nature, it has a high resistance to chemicals.
• HDPE pipes; To take shape and slope of the sloping terrain by laying is very simple due to be flexible.
• HDPE pipes; Due to its high elasticity properties, for use in areas where a lot of seismic activity is very comfortable. It can orient itself according to the direction of movement of ground motion and does not break.
• HDPE pipes; Other types of pipes
• HDPE pipes; welding and assembly methods are very simple.
•HDPE pipes; Easy to carry because of the weight and thus shipping is cheap.
• HDPE pipes; It is highly resistant to acids and alkalis. Only damaged by nitric acid.
• HDPE pipes; Environmentally Friendly.
• HDPE pipes; Are not affected by underground, there is no refractive properties.
• HDPE pipes; it do Not conduct electricity.
• HDPE pipes; a good level of friction, wear and has a rustproof.
• HDPE pipes; It is strong against microorganisms.

2- Feild Assembly
2.1- Polyether Storage and Transport
2.2.1- Storage
After the production of HDPE pipe, there are some important points to be considered while the storage structures.
* Accumulation against the proposed measures should be taken and must be 1 meter in height.
* Coils are silos for the proposed arrangement. Silo is important not to disturb the balance in the individual coils received.
* Straight pipes should be arranged in horizontal rows and so it should stand from the bottom row to the top row angle. The shift of pipe supports should be avoided as well.

Of storage on top of the pipe:
• Pipes must be stored in a remote way of sharp objects in a horizontal plane.
• PE Pipe fittings in a closed manner, should be stored in the package.
• PE pipe and fittings waste water, dirt and soil contact must be avoided.

Transportation or shifting:
* Freezing or maintained at a lower temperature than PE pipes are becoming weak against shocks. Therefore pipes should not be reduced quickly by dragging on the ground, it’s impact should be seen.
* Polyethylene Pipes with the handsaw when cutting and freezing bilateral assistance should be provided if done at a lower temperature may break or bend.
* Polyethylene pipe will be carried during the transport of the vehicle must be full length of the pipe in the pipe tools and should be hanged out.
* After the move is finished Polyethylene pipe absolutely must use ropes or chains when they are shifted down from the transport vehicle. pipe and fittings must not be thrown to the ground. Use forklifts or cranes use the recommended shifting method.

2.2- Sliding Support Renovation
2.2.1- The open (air) hinged flor
Intervals are restrained; laying line, the temperatures existing in the environment, size and characteristics of the pipe depends on the fluid properties. Usually need continuous support for small-scale Although intermittent bearings used.
Saddle bracket, the bottom of the tube 120 degrees (minimum) should be up bed. To prevent the bearing from damaging edge of the pipe must be taken to be pointed.
Supports formula used to calculate the range are as follows;

L = [(3840xExlxd / (5(Wp+Wf))1/4] / 100

Details;
L: Support Range (m)
E: Young's modulus (MPa)
l: the inertia of the pipe (cm4)
d: Permitted collapse (cm)
Wp: Pipe unit weight (kg / cm)
WF: The unit weight of the fluid (kg / cm)
EUR table of typical values PE 100 pipes for long periods of use

2.2.2 Burying Ground Floor
Soil pipe laying in the classic sense to dig, lay, off, requiring a very different and meticulous engineering of logic is a serious work. Terms and explanations that we give here will be the guidance that will enable us to have information on the matter. Making process of laying buried in the soil as it requires decisions should be made and given to the different application methods.
Materials and Processes on the pipe burial

Fitted foundation:
When you are finished digging needs to be done with enough strength on the ground if not the strengh should be made enough.

The layer/ground:
Ditch the ground state according to the required form to implement the process according to the flat level.

Primary and secondary fillers :
The height of the pipe from the ground Trench landfill is made to increase at least 15 cm. The fill tube that improves the quality and lifetime durability.

Primary Filler:
The quality of the material and application technique used in this section is very important. The diameter of the pipe rising from the bottom of the filler pipe is raised to 75%.

Secondary filler:
It is fuller of the distribution of load on top of the reason for making and maintaining the pipes against the play that may occur after the end filler. Place in case of rising to the level of underground water pipes and come in second if the first is filling more.

Last filler:
Although there is not too much of an effect on the structure of the HDPE pipe and pressed. To ride a solid filler pipe will reduce the upper end loads.
Last filler material and the compression paths, sidewalks, etc. structure/processing rules must be observed.

Installation Guidelines for PE Pipes
Workplace and the work to be done by engineers to consider the shape of the surface and it is difficult to determine that which part needs the reinforcement of the pipe. Specific guidelines for situations such as low soil depth is more than the thickness of the meat should be prepared. In general, it is sufficient that we understand the methods for general application. These applications are not installed to deep, on overload events, and are conditions that are sufficiently resistant to pressurize pipes.

Simplified Application Methods for HDPE Piping
Most of the time an application is required for successful implementation of the following conditions successfully. steps occured by providing the following conditions;
1. The pipe diameter of 600 mm or less
2. SDR 26 or less
3. Fill size of between 0.75 m to 5 m
4- be at least 60 cm from the surface of the groundwater.

HDPE pipe is the preferred choice for many pipeline applications. We provides support to assist the successful installation and operation of the system. Experience personnel provide advisory information on such items as the ranges of pipes and fittings available, the technical features of the product, site and factory welding. For further information on polyethylene pipe systems contact Digital Inspiration . 234-(0)7038572120

STARTER PLAN N20,000

Up To 3 Pages
1 Branded Mail
1 Time Monthly Update
5 Pictures / Products

BASIC PLAN N30,000

Up To 5 Pages
3 Branded EMails
3 Time Monthly Update
20 Pictures / Products

PLUS PLAN N45,000
10 - 20 Pages
Unlimited Branded Mails
1 Time Weekly Update
1 Time Weekly Update

PRO PLAN N80,000
Unlimited Pages
Unlimited Branded Mails
Update At Any-Time
Advertising Offers


All Packages Included
Home page

Content Management System

Installation & Setup

Slider Design

Content integration

Contact form

Mobile and tablet friendly design

Social media integration

Photo Gallery

HTML 5 - the latest HTML standards

Search engine friendly

True 24 X 7 customer support

TO ORDER NOW CALL 07038572120

4 TIPS FOR SHOWING KIDS HOW TO BUILD ELECTRONICS

Children are normally inquisitive about how things function, and with another pattern in equipment organizations making open source Hardware products, it's an incredible time to show kids about electronics. Be that as it may, current technology can appear to be excessively mind boggling, making it impossible to try and start to get it. So where do you begin?

For the past Five years I've dedicated myself to teaching electronics to beginners, both kids and adults. I have given workshops to everyone ranging from young kids in remote areas and the ones in Urban Areas. And I have created over fifty DIY projects . If there's one thing I've learned through my experiences, it's that building electronics is easy.

Professionals in the field may disagree with this claim! And of course there are super-complex areas in electronics, as in every field. But that shouldn't discourage anyone from starting out. Take football for example: Is it hard to play football at a professional level? Of course! But that doesn't stop your eight-year-old daughter from playing. The same is true for building electronics.

China the largest hardware producer in the world today start just like you are about to start, though it took time to get to were they are today but the fact still remains that they started teaching their kids how to build electronic projects from a very young age.

Whether you're a parent or teacher, an electronics engineer or total beginner, here are four tips for teaching your kids how to build electronics.

1. Buy a solderless breadboard and some standard components

A solderless breadboard lets you connect components together neatly, easily, and temporarily. This makes it easy for kids to experiment and try things out without worrying about damaging parts. When they're done with one circuit, they can simply take out the wires and components and rearrange them to build another. The solderless breadboard is perfect for connecting components, and building more and bigger things.

Help them out with the first few circuits until they get the hang of it, then let them build on their own. This can provide hours of fun for your kids—it still does for me!

2. Look at some basic circuit diagrams

Electronic circuits are explained using circuit diagrams, which show you the components used and how to connect them. This is a great way to start building circuits, and this is how open source hardware companies publish the blueprints to their products.

Teach your kids the diagram symbols for basic electronic components. Start with the symbols for the most common components used in beginner circuits: batteries, resistors, LEDs, capacitors, and transistors. Explain how the lines between the components represent wires connecting the components together.

Kids don't need to understand the theory behind electronics to start building things from circuit diagrams. All they need is the circuit diagram and the components to build it. From there they can start to explore on their own. There are many open source hardware projects online, ranging from simple LED circuits to complex touch displays like the Manga Screen.

3. Teach some basic concepts of electronics with examples

When your kids have played around a little bit with electronics, they're going to get curious and start asking "why" questions. When that time comes, it's time to teach your kids some of the basic concepts of electronics. Here are some things I like to start with:

Closed loops: For electricity to work and current to flow, you need a closed loop between the postive (+) and the negative (–) poles of the battery. This is an important first lesson, and can save your kid much troubleshooting time later. Show them with a simple circuit that when you break the loop, the electricity stops flowing.

Voltage, current, and resistance: These are fundamentals of electricity and your child will find it easier to get creative once they understand these concepts. Cartoons are always great for teaching kids, and this is a nice drawing that may help to illustrate your explanations http://www.build-electronic-circuits.com/wp-content/uploads/2014/09/Ohms-law-cartoon-cropped.jpg.

Resistors: Why does an LED need a resistor? Have your child learn through experience by showing them an LED being destroyed by an overload of current. They won't forget that lesson!

Ohm's law: Use Ohm's law to show your child how to calculate the correct resistor size for an LED circuit.

If you're not sure about the details of these concepts yourself, there are plenty of resources online and in beginners' electronics books. You could even go deeper and teach them how a transistor works and what capacitors do.

But remember: Too many complex explanations can make kids feel that electronics is hard to understand. The more you can show them how things work instead of just explaining it, the better. How about showing how a capacitor works by connecting it in parallel with an LED and a resistor, and then disconnecting the battery to show how the capacitor keep the LED lit even after you disconnect the power?

4. Buy a soldering kit and a soldering iron

Once your kid has played about a bit with a solderless breadboard, they may want to make some circuits more permanenet. A soldering kit is a great way to go about this.

A soldering kit usually comes with a printed circuit board, the components needed to build some simple circuits, and some instructions and ideas to start you off.

You do need to know how to solder, but that's easy to pick up and to teach to your kids. This PDF cartoon on how to solder is a good teaching tool. https://mightyohm.com/files/soldercomic/FullSolderComic_EN.pdf

Basic kits are great for starting kids out, even if they haven't experimented with breadboards first. You don't need to understand how it works to make it work; you just follow the instructions. It's a simple way to dive right into hardware if you don't know where to start.

Soldering irons can be really cheap, starting at under N1000. Remember to make sure you supervise younger kids, as soldering irons get extremely hot.

No matter what you do, the most important thing is to let your kids do a lot of experimenting. When they know how to build things from circuit diagrams and where to find diagrams, they are in a great place to learn independently. As they build new things they will become more curious and eager to learn. Having a book available,is a great way of enabling them to learn more on their own.

Your kids probably won't understand how to build a television or a cell phone right from the start. But once they've built a few things, they might start to believe that maybe it's not that hard after all. That belief is what got me into electronics.

Do not hesitate to call me if you need any help on your DIY projects or want me to couch your child, children or student.

About the author
Ukachukwu Chinazor Jude is an electronics enthusiast who loves to teach people how to build things with electronics. He is the founder of the online DIY blog technokids.com.ng.
Tel: 07038572120

4 TIPS FOR SHOWING KIDS HOW TO BUILD ELECTRONICS

Children are normally inquisitive about how things function, and with another pattern in equipment organizations making open source Hardware products, it's an incredible time to show kids about electronics. Be that as it may, current technology can appear to be excessively mind boggling, making it impossible to try and start to get it. So where do you begin?

For the past Five years I've dedicated myself to teaching electronics to beginners, both kids and adults. I have given workshops to everyone ranging from young kids in remote areas and the ones in Urban Areas. And I have created over fifty DIY projects . If there's one thing I've learned through my experiences, it's that building electronics is easy.

Professionals in the field may disagree with this claim! And of course there are super-complex areas in electronics, as in every field. But that shouldn't discourage anyone from starting out. Take football for example: Is it hard to play football at a professional level? Of course! But that doesn't stop your eight-year-old daughter from playing. The same is true for building electronics.

China the largest hardware producer in the world today start just like you are about to start, though it took time to get to were they are today but the fact still remains that they started teaching their kids how to build electronic projects from a very young age.

Whether you're a parent or teacher, an electronics engineer or total beginner, here are four tips for teaching your kids how to build electronics.

1. Buy a solderless breadboard and some standard components

A solderless breadboard lets you connect components together neatly, easily, and temporarily. This makes it easy for kids to experiment and try things out without worrying about damaging parts. When they're done with one circuit, they can simply take out the wires and components and rearrange them to build another. The solderless breadboard is perfect for connecting components, and building more and bigger things.

Help them out with the first few circuits until they get the hang of it, then let them build on their own. This can provide hours of fun for your kids—it still does for me!

2. Look at some basic circuit diagrams

Electronic circuits are explained using circuit diagrams, which show you the components used and how to connect them. This is a great way to start building circuits, and this is how open source hardware companies publish the blueprints to their products.

Teach your kids the diagram symbols for basic electronic components. Start with the symbols for the most common components used in beginner circuits: batteries, resistors, LEDs, capacitors, and transistors. Explain how the lines between the components represent wires connecting the components together.

Kids don't need to understand the theory behind electronics to start building things from circuit diagrams. All they need is the circuit diagram and the components to build it. From there they can start to explore on their own. There are many open source hardware projects online, ranging from simple LED circuits to complex touch displays like the Manga Screen.

3. Teach some basic concepts of electronics with examples

When your kids have played around a little bit with electronics, they're going to get curious and start asking "why" questions. When that time comes, it's time to teach your kids some of the basic concepts of electronics. Here are some things I like to start with:

Closed loops: For electricity to work and current to flow, you need a closed loop between the postive (+) and the negative (–) poles of the battery. This is an important first lesson, and can save your kid much troubleshooting time later. Show them with a simple circuit that when you break the loop, the electricity stops flowing.

Voltage, current, and resistance: These are fundamentals of electricity and your child will find it easier to get creative once they understand these concepts. Cartoons are always great for teaching kids, and this is a nice drawing that may help to illustrate your explanations http://www.build-electronic-circuits.com/wp-content/uploads/2014/09/Ohms-law-cartoon-cropped.jpg.

Resistors: Why does an LED need a resistor? Have your child learn through experience by showing them an LED being destroyed by an overload of current. They won't forget that lesson!

Ohm's law: Use Ohm's law to show your child how to calculate the correct resistor size for an LED circuit.

If you're not sure about the details of these concepts yourself, there are plenty of resources online and in beginners' electronics books. You could even go deeper and teach them how a transistor works and what capacitors do.

But remember: Too many complex explanations can make kids feel that electronics is hard to understand. The more you can show them how things work instead of just explaining it, the better. How about showing how a capacitor works by connecting it in parallel with an LED and a resistor, and then disconnecting the battery to show how the capacitor keep the LED lit even after you disconnect the power?

4. Buy a soldering kit and a soldering iron

Once your kid has played about a bit with a solderless breadboard, they may want to make some circuits more permanenet. A soldering kit is a great way to go about this.

A soldering kit usually comes with a printed circuit board, the components needed to build some simple circuits, and some instructions and ideas to start you off.

You do need to know how to solder, but that's easy to pick up and to teach to your kids. This PDF cartoon on how to solder is a good teaching tool. https://mightyohm.com/files/soldercomic/FullSolderComic_EN.pdf

Basic kits are great for starting kids out, even if they haven't experimented with breadboards first. You don't need to understand how it works to make it work; you just follow the instructions. It's a simple way to dive right into hardware if you don't know where to start.

Soldering irons can be really cheap, starting at under N1000. Remember to make sure you supervise younger kids, as soldering irons get extremely hot.

No matter what you do, the most important thing is to let your kids do a lot of experimenting. When they know how to build things from circuit diagrams and where to find diagrams, they are in a great place to learn independently. As they build new things they will become more curious and eager to learn. Having a book available,is a great way of enabling them to learn more on their own.

Your kids probably won't understand how to build a television or a cell phone right from the start. But once they've built a few things, they might start to believe that maybe it's not that hard after all. That belief is what got me into electronics.

Do not hesitate to call me if you need any help on your DIY projects or want me to couch your child, children or student.

About the author
Ukachukwu Chinazor Jude is an electronics enthusiast who loves to teach people how to build things with electronics. He is the founder of the online DIY blog technokids.com.ng.
Tel: 07038572120

People who aren’t involved in the graphic arts industry probably
have no idea where all
that stuff in their mailbox comes from. They’re blissfully unaware
of the design process
and give not a whit about those poor guys on third shift in the
printing plant trying to
troubleshoot a problem file. They don’t think about the electronic
design environment
or the mechanical process of printing. All they think is, “Wow! That
really looks good!
I should buy this!” But as a designer or production artist, you need
to know a bit about
what happens when you’re finished with your part of the job. The
more you know, the more
you can do to prevent problems—and missed deadlines—later in
the life cycle of your job.
to know more call us today for your

Website Design
Hand bills (fliers)
pamphlets
calendar
Note books (for birthday and other purposes)
carrier bag (for wedding, birthday, funeral etc)
Receipt and Invoice
complimentary cards (popularly known as business card)
printing on Nylon bags and gift items (for wedding, birthday etc)
jotter (for wedding, birthday, etc)
flex banner for any advertisement or awareness.
printing T-shirt, Face caps etc
call for all your printing jobs:07038572120
whatsapp: 07038572120
request for job quotation through any of the contacts while we
reply immediately.

some of our work include the following:
https://drive.google.com/open?id=1B55VY2084vrW2a3hzxf1l2xXE_LnIFwK
https://drive.google.com/open?id=1Q7CuiBcrCJxPqSr7SlIeA4akMw4RMOZl
https://drive.google.com/open?id=18xsHTtw2MDED71Qy-derV16MfFQVaxzZ
https://drive.google.com/open?id=1hVzEYjvlep9b4EVp7jYZCUFN6RL4WDeK
https://drive.google.com/open?id=1x2chALzLMwHTsgibbAf1B7V2uJd6YWHU
https://drive.google.com/open?id=1a88sjZLeWrWfpPcER8RFz-fnBUk9QKGb
https://drive.google.com/open?id=1Fvmb1mvRky22Gq5-S0Th0xcJAg0RBM8X
https://drive.google.com/open?id=1UjVX__gyrV7p1DD8tRQ0DVrw6K4ur8ge
https://drive.google.com/open?id=1fFYsAWH-B2RvjvUkFHJfhltULn4MXo7U
https://drive.google.com/open?id=1sfcpW8cuC2x99Qv_FY744tbm5N9sEctz
https://drive.google.com/open?id=1n0R6seqmMBXDwf8HItN_bTgUoo8BXRfY
https://drive.google.com/open?id=1uyxV7TGjDXjjsWM331yMvxCCfZ413d1R
https://drive.google.com/open?id=1BmBnb2JSBLblQNNpQM3WYTYjWudGLX40
https://drive.google.com/open?id=189FFPkCxCFi8yknJfgFhtKt982FNawDv

Have you mistakenly deleted your important files from your laptop internal or external hard drive, flash drive, memory card and phone internal storage ? Do your laptop windows or apple operating find it difficult to read your hard drive, memory card , flash drive and phone internal memory files and you don't want to format them because of your important data on them ? Have your storage devices been corrupted by virus or other things and you don't want to lose your important data ? If yes to one or all these questions, I am very happy to tell you that there is solution to your problem. In DIGITAL INSPIRATION, we recover data from corrupted storage devices like hard drive, flash drive etc We also recover data from deleted storage devices like phone internal memory, flash drive , memory card etc If your laptop windows or apple operating system cannot read your storage devices, we can solve the problem for you without formatting them. We are reliable because we will not charge you if we don't fix your storage devices problem or recover data from them. NOTE: A HARD DRIVE THAT MAKES A CLICKING SOUND OR LOUD NOISE CANNOT BE FIXED AND DATA CANNOT BE RECOVERED FROM THEM. Office Adress: 35, Oloruntoyin street, off muritala bus/stop, bariga, Lagos Phone numbers: 07038572120 WhatsApp number: 07038572120 Website:www.digitalinspire.com.ng Save your data now ! ! !

Hi guys,
do you want to earn money as a designer and for your designs,http://digitalinspire.com.ng/vector/ is the preferred place to go to

Adegboyega Adepegba & Co hold a 3 day seminar on Human Resource Management and the Law at Green Legacy Resort, Abeokuta from Tuesday 3rd May to Thursday 5th May 2016.

The Seminar, specially designed for Human Resources Managers is to focus on Laws relating to Labour and Employment, and proffer solutions to the challenges Human Resources Managers are facing particularly in the face of varying degrees of issues in the workplace owning to the economic situation in Nigeria.

The 3 day programme will be facilitated by eminent and distinguished professionals and some of the best in the Continent.
This Seminar will draw participants from the Insurance Industry in particular and the financial industry in general.

FOR INFO:adepegbachambers.com

Adegboyega Adepegba & Co hold a 3 day seminar on Human Resource Management and the Law at Green Legacy Resort, Abeokuta from Tuesday 3rd May to Thursday 5th May 2016.

The Seminar, specially designed for Human Resources Managers is to focus on Laws relating to Labour and Employment, and proffer solutions to the challenges Human Resources Managers are facing particularly in the face of varying degrees of issues in the workplace owning to the economic situation in Nigeria.

The 3 day programme will be facilitated by eminent and distinguished professionals and some of the best in the Continent.
This Seminar will draw participants from the Insurance Industry in particular and the financial industry in general.

FOR INFO:adepegbachambers.com

Standing out from the crowd

The final important point about your bid is that you need to focus on what the client wants – something that many bidders forget. Too many proposals and tenders take reams and reams to tell the client how marvellous the supplier is, how many people they have, where there offices are etc etc – when what the client really needs to known is ‘do you understand what we want and can you deliver it?’

A good test is to write the document and then take a break before coming in and reading through first the ITT and then the bid document as though you were a buyer. Imagine you have 30 or 40 of these to read through – is there anything that grabs your interest, does the bid tell you what, when, where and how the service will be provided? Has the bidder read the ITT? Is the document well laid out and professionally presented and above all – have they answered every single question?

The final check should always be to get someone who has not been involved to read the ITT and bid before you send it in. This can be challenging if the timescales are tight but an independent, objective view is probably the only way you’ll spot those silly mistakes and typos that always creep in.

Note
To Increase your chances of the being the best responsive bidder.
Contact Digital Inspiration for any kind of contract we give an edge over your competitors.
08038572120, 07038535761.

Doing the best possible job on a bid or proposal

Having decided to bid for a tender/put in a proposal you need to do the best possible job of producing a compelling document that will get you through to the next stage.

Before you do anything else, read the tender documents very, very carefully and then make sure that you follow any instructions you’ve been given. If the document says deliver your tender by hand, do it, if it says no more than 5 pages don’t write 6. Put yourself in the shoes of the person who may be asked to do the initial filtering of maybe 100 proposals – this person may know very little about the required services but they’ll find it very easy to remove your proposal from the pile if you’ve failed to include a required policy or set your document out in the wrong order.


Health and Safety Policy
Equality and Diversity Policy
Financial information e.g. 3 years accounts
Professional indemnity and/or public liability insurance details
Equal Opportunities Policy


You don’t necessarily need a long winded document for these, something appropriate to the size of your company and the work you’ll be doing should be fine. There are numerous websites that sell policy documents that you can base your on, or you can search the web for other peoples to give you an idea what to include.


Note
To Increase your chances of the being the best responsive bidder.
Contact Digital Inspiration for any kind of contract we give an edge over your competitors.
08038572120, 07038535761.

What do I need to know before I start?

Every bid solicitation is unique, so read it very carefully.

If you have questions, follow the process specified in the bid solicitations. To ensure the integrity of the competitive bidding process, enquiries and other communications regarding the solicitation must be directed only to the contracting officer identified in the solicitation, not to the client department or other government officials. Generally, you will be asked to submit your questions in writing. Failure to comply with these requirements may result in your bid being declared non-responsive.

Do not make any assumptions about what is required. If you need clarification or think you have found an error, let the contracting officer know as soon as possible. The bid must be evaluated against the criteria as they are written so changes cannot be made by the contracting officer after bid closing date.

The buyer will compile all questions and answers and issue an amendment to the solicitation document (if the opportunity was published on the Tenders minisite, the amendment will be published there). This ensures that all bidders have the same information. Pay attention to the timelines specified in the solicitation document, as questions may need to be received before a certain deadline.

If you think the deadline is unreasonable, call the contracting officer and see if the closing date can be extended. If you do this early in the process, it may be possible. However, it is not possible to extend the date within three working days of the bid closing, as it may be too late to notify bidders who may have already sent in their bid.

How do I prepare my bid?

The solicitation document will explain to you exactly how to lay out your bid and how it will be evaluated. Make sure you follow the instructions provided and address each and every point completely. You may be asked to provide your bid in various separately bound sections such as: a technical section, management section, financial section and certifications, if required.

Carefully review and make sure you understand the clauses, general conditions and standard instructions. These are normally included in each solicitation document in “full text” or by “reference”. Refer to the Standard Acquisition Clauses and Conditions (SACC) Manual.

Before you start writing, figure out which criteria are mandatory, that is the “must haves”. Mandatory criteria are usually evaluated on a simple pass/fail basis. If your bid fails to meet any of the mandatory criteria, such as a surety bond, it will be considered non-responsive.

NOTE: A surety bond is issued by an insurance company who assures that the enterprise performing the work can do it. When a surety bond is required, you must include in your solicitation document a list of acceptable bonding companies together with the applicable surety bond form.

Acceptable bonding companies, Treasury Board Contracting Policy, Appendix L
Surety bond forms, Chapter 4, Section 4.50.1 of the Supply Manual
Ensure that you fill out all the certifications requested, such as “Education and Experience” or the “Federal Contractors Program”. Depending on the size of your business you will be required to certify, by filling out the Agreement to Implement Employment Equity form, that you have made a formal commitment to implement employment equity in order to bid for some federal government contracts.

Ensure that you submit the certifications by the time and date specified in the solicitation document (some may be submitted later than the stated bid closing date but be sure to verify).

Ensure that you bid meets the conditions to bid, such as submitting it on time. This is especially important since only responsive bids will be evaluated, regardless of the quality of the document.

Top of Page

Security clearance requirements

A security clearance is necessary when your personnel, under contract, will require access to classified or protected information, assets or sensitive federal work sites. If this is the case, the contracting officer or project manager may, through their directorate/department’s security office (as required), complete a request for registration that will propose a security clearance for your business and your personnel. The solicitation document will specify what level of security clearance your business will need. Obtaining a security clearance can be a lengthy process; therefore, if the bid solicitation you are interested in requires a security clearance and you do not have one, speak to the contracting officer as soon as possible to get the process started.

Contract Security Requirements
Security Requirements Checklist (SRCL)
For more information about security clearance, visit the Industrial Security Program Web site, or call the Call Centre at 1-866-368-4646, or send an email at: ssi-iss@tpsgc-pwgsc.gc.ca.

Technical section

This is where you usually provide the most details. It is your chance to show the evaluation team that you understand the requirements. Use your own words to describe what and how you would do the work if you were awarded the contract.

Start with a short introduction that includes an evaluation of the current situation and the need for the project, the objectives of the proposed work, the reasons for carrying it out as proposed and the benefits that will be derived.

Indicate and substantiate the work plan, methodology and techniques that you are proposing. Discuss feasibility, the degree of success expected, identify any problems anticipated and contingency plans in the event that problems arise.

Identify specific tasks and deliverables and the schedule for completion or delivery. Provide information about how many people you will assign to the various tasks, their levels (give their title, not salary) and how many hours or days they will be assigned to the tasks. Do not include any pricing information in this section. (Note: this may or may not be a requirement of every solicitation.)

Ensure that you satisfy all requirements, and clearly detail how you meet each and every one of them.

If you would like to propose an alternate solution, you should respond to the specific request made in the solicitation document first. Do no offer it as a substitute for what is being requested or your bid could be considered non-responsive. If you still would like to offer an alternative solution, submit it as a separate bid along with your main bid.

Management section

Introduce your team and demonstrate how they meet the required qualifications. Include any corroborating information required, such as resumes.

If you will be subcontracting part of the work, the same information should be provided for each subcontractor.

Do not assume contracting officers know your organization and skills because you have dealt with them before. Each bid is evaluated solely on its content and members of the evaluation team are prohibited from using prior knowledge to award points or meet mandatory criteria.

Financial section

Provide a detailed breakdown of the quoted price in terms of its cost elements. The solicitation document will tell you what cost items will be considered in the financial evaluation. No other costs will be considered. Prices must appear in the financial bid only.


Note
to have a professional touch on your bid document
Contact Digital Inspiration for any kind of contract we give an edge over your competitors.
08038572120, 07038535761.

The Company Secretary face different issues and challenges especially in this era of good Corporate Governance. Nigeria is going through a new era of change in the attitude of all public and private officials in the discharge of their duties.

This 3 day training programme therefore provides a uniquely desirable opportunity for Company Secretaries and Legal Advisers to be the Champion and Advocators of Corporate Governance and Integrity in our organisations.

Governing Boards and Management need the requisite support to enable them key in, imbibe and operate in the spirit of Corporate Governance for the efficient running of their Organisations. These require up to date, high quality, relevant information and advice to enhance their effectiveness in taking right and strategic decisions which also conforms with Corporate Governance rules.

The Company Secretary, the Legal Adviser, and the General Counsel as the case may be play a key role in supporting the Boards and Management in the quest for effective and time tested decisions by their Organisations

This Programme is therefore put together to enable the Target Participants to further appreciate their changing roles and responsibilities.
The course will dwell on the following:

i have tried to reach you but your number is switched off please i want to know more about this your product and how it can benefit my cafe. call me as soon as you receive this message: 07038572120

[quote author=southniyikaye post=28100673]oga I have this gas in my house and it has been useless for almost 3yrs now..I mean how daft can d manufacturers be? The cylinder inside is not refillable and it became uselss
[Oga the one i sell is refillable i don't know where you bought that one]

Description:

Enhance your camping trips with a portable gas stove
Camping cookware boasts a safety Governor system
Camping accessory features a safety shut-off device
Piezo electric ignition
Drip pan
Burner head
Canister cover
Pan supporter
Ignition plug
Canister lever
Ignition knob

Dimensions:
23.50x14.75x13.00
Materials:
Plastic, Steel, Aluminum & Cooper

You can place an order or call me 07038572120 Nationwide delivery is available. Also Available on whole Sale
The prices quoted above exclude the cost of postages or transport to the destination of the buyer.

you can also visit our website http://digitalinspiration.gnbo.com.ng/home