₦airaland Forum

Good morning house pls I need help on my lexus rx350 2010 model...here is the scan result..pls help a brother out

Good morning house pls I need help on my lexus rx350 2010 model...here is the scan result..pls help a brother out

Good morning house pls I need help on my lexus rx350 2010 model...here is the scan result..pls help a brother out

You can send me an email kehindeolusile@ gmail.com
Thanks

Chidimercy:
Send me yours so I can text you. Where do you base?

It has not been resolved..pls kindly send me your whatsapp number so i can get the person that helped out thanks

Chidimercy:
Have this been resolved? I had this issue in my RX350 2010 earlier this year. I did a lot of try and error. Which even made me spent a lot of money and damage some things in my car. But the actual thing that resolved it is was changed the TCM.

It changes gesr fine..when driving on rpm 1500 it does that either in gear 1234 it does that..oil is new with filter also

quote author=Louiscars post=137332856]
By jerk back do you mean like a thud when changing gear
Confirm engine mount are fine
Check condition of the transmission oil[/quote]

Changed the pump already..brand new complete shaft..TCM upgraded still does that pressure gauge 55

oluwaseunla:
If the jerk is not during a transmission change, you should probably run a fuel pressure test since you don't have any code on the car.

I have updated the TCM YESTERDAY...still like that..also the shaft is brand new one complete..pls what else can we check thanks

kingreign:
Have all mounts and bushings and inner cv joints checked. You may wish to update the TCM too.

Good morning all..pls i notice a jerk back on rx350 2010 when on 1500rmp..the car does not have any code on gear and engine pls what could be the problem..thanks and i await your reaponse

Good morning all..pls i notice a jerk back on rx350 2010 when on 1500rmp..the car does not have any code on gear and engine pls what could be the problem..thanks and i await your reaponse

Good morning all..pls i notice a jerk back on rx350 2010 when on 1500rmp..the car does not have any code on gear and engine pls what could be the problem..thanks and i await your reaponse

Good morning all..pls i notice a jerk back on rx350 2010 when on 1500rmp..the car does not have any code on gear and engine pls what could be the problem..thanks and i await your reaponse

zuby4real10:
Seat belt. Weather passenger or driver's own.

Ghhjejirrijrjeggstahanbnn

its an issue with the airbag and not seat belt

thanks

9.5m

Hope say no be audio like this

Abbeyismo:
Yes i can help u get it and send to you.
Are u in lagos?
Where in lagos?

Yes abule egba

Abbeyismo:
Around 10k ocv sensor

Do you have a seller

Good evening all..pls how much can i get this sensor and who sells for toyota camry 03 4plug

Good evening all..pls how much can i get this sensor and who sells for toyota camry 03 4plug

Good evening all..pls how much can i get this sensor and who sells for toyota camry 03 4plug

Dozieson:
n


P0113 -intake air temperature sensor is either faulty or cable broken or disconnected. Could also be triggered by P0102

P0102- Mass air flow sensor faulty or cable broken or disconnected. Could also be clean and reinstalled.

P0420- either catalyst is stolen or evap canister issue. You can ignore

P0016- could mean your oil level is not up to guage, dirty oil, vvt solenoid clogged with gum or sludge, or timing not properly set.

I believe your engine has been worked on.

Hope you are no having hard starting

My engine starts fine..I am guessing the vvti solenoid…can it be replacedthanks for the answers God bless

Good afternoon guys..I scanned my car and I got this code for Camry 03

P0113
P0102
P0420
P0016


Pls house need your advice before kazeem tell me otherwise

Good afternoon guys..I scanned my car and I got this code for Camry 03

P0113
P0102
P0420
P0016


Pls house need your advice before kazeem tell me otherwise

Good evening guys…pls who can recommend a scanner that can scar my Camry 03 and which is not expensive also..thanks

Pls house any idea of how much shaft of toyota big daddy tokunbo cost.. 4plug

Pls anyone that can add me to bolt driver whatsapp group.. Here is my number 08133946847... So i can learn from the top gurus.. Thanks

Ok.. Thanks.. Appreciate your response

ReadaDream:
It could be, give it time. I believe you will receive a notification of when you can go online.

Yes have taken the survey yesterday night.. I read it will take 24hours to review the survey. Is that why i have not been able to go onlinebyet??

ReadaDream:
Have you tried going online and it didn't work?..

All your documents has been approved, you should be able to go online.

Meanwhile have you taken the 'situational survey'?

Pls someone should answer this.. Thanks

Felakezman:
How do i activate my car on uber.. I have completed all thing required yesterday night

How do i activate my car on uber.. I have completed all thing required yesterday night