₦airaland Forum

I Dont deep discharge my battery. Most times I wake up with 13.0v. My freezer is only on during the day. I only use lights fans and TV at night. I manage my load prudently

adimx:
Wow!
And just 2panels of 535w charges it full with load on it daily?

Why una dey drain battery to 10.24v? When I was using 100ah lead acid sef I no drain am pass 12.0v. When I moved to joykoo 100ah, that one no ever pass 12.9v

codemaster2much:
Hi everyone,I need help reviving a HenryLFE 12V 150Ah battery drained to 10.24V. The BMS is locked and the Bluetooth signal has disappeared (it won't show up on any phone/app).What we've tried:14.6V 20A LiFePO4 Charger: Won’t start; doesn't "see" the battery.Parallel Jump: Tried jumping with another battery, but the BMS won't wake up or allow the charger to take over. Help

Another thing is the placement of your panel. Where is it facing? Is there a shade casting on your panel?

hoover420:
Omoh I think there is something probably wrong with my panel but I’ll see what happens when I get the second panel though. Because my single 535 watt should be giving me at around 400 during peak but all I get is within the range of 200 to 300.

4kw

adimx:
What is the capacity of your 12v battery?

My night load after 10:30 is less than 100w

fuckboys:
chief, we're better than millions of Nigerians without electricity o. No matter how small the setup is.

Once is 7pm the house loads reduces to under 300w till daybreak. I still keep cooking gas for night food warming only. Fresh food cooking must happen during the day time with induction cooker.

Jinko bifacial 535W

Prince3030:
Which product and how many watt

My inverter is set to cut off at 12.0v. That has only happened ones before I got my jinko panels

Valto:
not advisable to discharge a 12v lifepo4 lithium battery below below 11.5v to 12v, talkless of 10v, the bms they used on your battery is terrible bro.

hoover420:
The silver crest I Dey see for Jumia pass 2k watt o

Na just 600w range. I tried it on the highest level and Ẹ no enter 700w

My two panels, dey give 200w-400w on a cloudy day. But when sun show sometimes I dey hit 1kw

hoover420:
Well I think I’ll just go for one more panel then. How many wattage does your panels produce during peak sun? My 1 panel does not give me more than 250 to 300 highest at peak sun. I don’t know if it is the settings or that is just how it is meant to be

Na that silver crest for jumia. Blends well

hoover420:
Which blender do you use pls and does it blend really well?

I also use a 12v system. 2 535w is fine. My battery gets full everyday. I don't even charge with nepa.

hoover420:
Thanks, my system is just 12v but with the little load I am using it to carry, I’m sure one or 2 more panels will solve my problem permanently. Also using grid to charge it while on prepaid is another expense o.

Even joykoo dey wake up

osayuwamwen:
I they wonder how battery take they deplete to 0% and battery won't wake, is the internal bms only for balancing ? all this cheap substandard battery, una they laugh me here when I bought humsienk 12v 314ah lifep04 battery, before I install my hybrid inverter then I was using the battery on sachet inverter were i drain the battery to as low as 10v and the bms nor they short down

Great. When I blow, I go join una. But for now, I dey enjoy with my small load

fuckboys:
great, I just dey fire am dey go. I've added 2 induction cookers to it. Full house load hitting 3.4kva.

How is the 24v treating you?

fuckboys:
that inverter is on another level, carry my 1hp LG inverter without stress, also my microwave. Solid inverter.


I wanted to go for the 24v but it was 3.6kva while haisic was 4.2kva and same price.

I no dey stress the inverter at all. The max load I use is 600w and that's my big blender.

fuckboys:
that inverter is on another level, carry my 1hp LG inverter without stress, also my microwave. Solid inverter.


I wanted to go for the 24v but it was 3.6kva while haisic was 4.2kva and same price.

Me dey enjoy my bread. Quiet beast.

fuckboys:
haisic 1.5kva can take up to 2000w of pv input.

Hi guys,
Worldcup is on its way.
I can link you with cheap and affordable data

Airtel 100gb
Mtn 120gb
DSTV Stream account sef dey
Spectranet Unlimited available.

T&C applies

I for buy this induction cooker but like here is non existent. My 12v system, I can't risk it

brightk:
does this involve parboiling and recooking..

Ẹ be like say na only induction cooker we dey talk about here these days

Anyone that sells active balancer in the house

Size of battery

favouredbymercy:
When dollarnaira dey say na who get sense dey use solar, nor be joke matter.

I have been on just 2 590w monofacial jinko panels for long and I DONT CHARGE WITH GRID. More than 80% of my family cooking, refrigeration, ironing, 55w (6 bulbs) security lighting daily and MORE usage ARE ALL FROM SOLAR. And my battery has NEVER EVER gone less than 60% once.

If we dey insist on Lifepo4 for here, e get why. The key word is EFFECIENCY.

Modified:
My roof is not the send down the rain type of roof you guys use for your buildings, and my panels are sw facing, more towards the west. Those 2 ginko panels dey fire steady.

Number on my signature

Bobbyunitedfc:
Hi
How do I reach you??

We still have the following plans:

Airtel 100gb
Mtn 120gb
Spectranet Unlimited
DSTV Stream account sef dey

There was no light when it happened.

justasitis:
The fault is not from Bulk or Floating Voltage Setting, it’s from the AC input. You will need to install a voltage/current regulator to protect your inverter from high voltage. See it below 👇

Ṣé. Un. Proof no dey hide 👀🔥

People are already getting connected…
You still dey think am? 😅

MTN 120gb
• Airtel 100gb l
• Spectranet Unlimited available
DSTV Stream available

Slots dey go fast ⚠️

My bosses in the house. My inverter threw a fault code 03, which is over voltage according to the manual. I have reduced the bulk and float to 14.4v and 13.8v respectively but it has done the same today. What can be the cause? My charge current is 60A. Inverter is bread 1.5kva and haisic 4kw.