₦airaland Forum

The car interior pics is showing that of a Toyota Highlander, check and rectify.

Good evening oga Gazzuzz, I use a Toyota Camry 2.4 which was hesitating at times so I scanned it and got this fault code P1135, please what should I do to rectify the fault.
Thanks boss

Hello can you display the engine pics of this ride.

lanpets:
More Picx...

@harryobi, if I were you I'll listen to @costee or @nissparts and contact them for the best possible advice or solution to your problem.

perfectbuy:
No it's a F-150, F-250 is a V8

I think the Ford F-150 also have a V8 engine too.

sooperrescue:
Twice a year. The Engine oil price depends on the current exchange rate. Last year, it was 3k per litre, this year, it is going steadily into 7k per litre

Thanks for all your effort bro.

I very much agree.

NgcoboP:
please add them

tmanis:
This car?? 2008?? 5.2 million?? I dont understand!

Exactly my thoughts too...this looks more like 2003/2004 model...or maybe I could be wrong too....but my believe shaa..

I can't believe this thread is quiet or dying...Please lets keep this thread alive to maintain general awareness on how to prevent and avoid car frauds/scams in this forum.

Hello Nissparts please I ran a diagnostic scan on my 2006 Nissan Murano 3.5 litres SL model and pulled the following codes with these details;

P1148 Closed Loop-B1
P0328 Knock Sen / Circ-B1
P0463 Fuel Level Sen / Circ
P0031 H02S1 HTR (B1)
PO725 Engine Speed Signal
P1722 Estimate Vehicle Speed Signal
P0746 Pressure Control Soleenoid A
P1778 Step Motor Function
P0868 Secondary Pressure Down

U1000 Can Comm

C1104 FR LH Sensor-1
C1143 ST ANG SEN Circuit
C1142 Press Sen Circuit

These codes were then erased while I drove the vehicle for some time before scanning again, upon scanning again the codes that stayed are;

P1148 Closed Loop-B1
P0328 Knock Sen / Circ-B1
P0463 Fuel Level Sen / Circ
P0031 H02S1 HTR (B1)

C1104 FR LH Sensor-1

What should I do concerning these codes as per resolution, thanks.

Hello house gurus please I ran a diagnostic scan on my 2006 Nissan Murano 3.5 litres SL model and pulled the following codes with these details;

P1148 Closed Loop-B1
P0328 Knock Sen / Circ-B1
P0463 Fuel Level Sen / Circ
P0031 H02S1 HTR (B1)
PO725 Engine Speed Signal
P1722 Estimate Vehicle Speed Signal
P0746 Pressure Control Soleenoid A
P1778 Step Motor Function
P0868 Secondary Pressure Down

U1000 Can Comm

C1104 FR LH Sensor-1
C1143 ST ANG SEN Circuit
C1142 Press Sen Circuit

What should I do concerning these codes as per resolution, thanks.

autotrader2:
Soon. I actually brought some but they were snapped up way back by other buyers. The problem is that the shocks are slightly different for same years but different models i.e. SE and XLE.
Right now i have a 2007-11 Camry SE shock pair available that doesn't fit a 2007-11 Camry XLE model
About the pricing, the exchange rate is just not favorable. That's my take on that

Good, but remember that mine is for 2002/2003 Toyota Camry XLE.

jodecibmw:
Hello do you have original US Spec. OEM shocks for 2002/2003 Toyota Camry XLE in your stock? it seems you only get for the 2006-2011 models.

When can you get mine too and how much to budget for them, that is for both front and back pairs. Thanks.

Hello do you have original US Spec. OEM shocks for 2002/2003 Toyota Camry XLE in your stock? it seems you only get for the 2006-2011 models.

nissparts:
When the pump is changed, is the high pressure hose also changed?

No boss the hose was not changed in any of the replacement changes. So that could be the problem, right?

I think the Toyota just as mentioned by @kingreign is stronger, durable and rugged as more emphasized by the transport industry in Nigeria. Ask any transporter to choose between say a Siena or Odyssey, Camry or Accord etc for interstate travels and see which one survives the hustle without constant breakdowns. Also ask companies in construction/Exploration to choose between Hilux/Tacoma vs Rigeline, though no Honda buses even my love "Nissan" Urvan can't compete with the Hiace either.

Hello house gurus, though I posted this earlier in the day @nissparts thread on nissan/infiniti parts store, I'm posting here for additional information/resolution of issue.

I have a 2006 Nissan Murano that i bought in 2009 and I observed that the steering wheel was hard to turn at times, I decided to check it out, but on my way to the mechanic the power steering belt cut, when I got to the mechanic he removed the power steering pump and we observed that it was bad, as the pump shaft could not rotate freely by hand, we then bought a toks one and installed in the car with new belt and new fluids. The steering was then back on and was okay till around 2013, after which it went bad again, so we bought another one and changed it again, this one didn't last a year before going bad, then I changed it again this year and for this one, when you start the car for the first time in the day the steering is hard to turn till you run the car for up to say 10 mins before you can turn the steering. Even after driving and you park for long say from morning till evening after close of work, I still have to wait till that 10 mins before the steering will move freely.
Please what could be the cause of this issue.
I need your advice and help here with this issue, I'd like to know if maybe the power steering pump is wrong, that is maybe if there is supposed to be like I read here about vin number-part-number for particular car, if you know what I'm getting at. Please I need your help and advice to solve this problem. Thanks in anticipation.

Hello @nissparts, I have a 2006 Nissan Murano that i bought in 2009 and I observed that the steering wheel was hard to turn at times, I decided to check it out, but on my way to the mechanic the power steering belt cut, when I got to the mechanic he removed the power steering pump and we observed that it was bad, as the pump shaft could not rotate freely by hand, we then bought a toks one and installed in the car with new belt and new fluids. The steering was then back on and was okay till around 2013, after which it went bad again, so we bought another one and changed it again, this one didn't last a year before going bad, then I changed it again this year and for this one, when you start the car for the first time in the day the steering is hard to turn till you run the car for up to say 10 mins before you can turn the steering. Even after driving and you park for long say from morning till evening after close of work, I still have to wait till that 10 mins before the steering will move freely.
Please what could be the cause of this issue.
I need your advice and help here with this issue, I'd like to know if maybe the power steering pump is wrong, that is maybe if there is supposed to be like I read here about vin number-part-number for particular car, if you know what I'm getting at. Please I need your help and advice to solve this problem. Thanks in anticipation.

Hello what year model is it.

OROZ:
7 months registered
Ride is still very fresh
Owner brought it from US himself
Mileage is low 47k
No check engine light
No fixes
Price 4.5m asking
Location Lagos lekki
Contact engr Bob 08034094226
Sweet ride, buy n drive