Boss, i have this 2014 camry 2ar engine that hesitates and gets loud when accelerating from stop. Engine revs well at idle, scanned for codes just have p0420. exhaust fume seem okay. what else do you advice we check. Transmission has been serviced with recommended oil. Thanks

1.8m

zeez88:
Thanks for the response! Yes, they maybe qualitative. But why should the seller claim they are original OEM TOYOTA/TOKICO shocks from JAPAN. Thats the problem. Does anyone know the price of qualitative chinese rear shock absorbers for the camry or lexus es330? Because i bought these for 45,000 which to me is a bit pricey for a knock offs!

Hi, how long did he take to deliver the shocks to you, i am trying to do business with him. Thanks

sooperrescue:


Bring down the gear, change the fibers and service the valve body and look for a good 6 speed transmission fluid et voila, it’s back on the road . Don’t forget to change the filter too

Thanks boss, really appreciate your reply, how about we change the gear, since we would be going all the way to change the fibers.

It's a 2007 range rover, how much would a replacement gear cost?.

Thanks again

sooperrescue:


Some people said it’s removable but the one that I am working on does not allow it to be removed. On Jeep, you can bypass it but I tried the same method on the Range Rover and it was looking at me like dundee. But we finally bought adblue enough to reset the def. I will start it tomorrow and then I will understand the power under a 2.0 turbo diesel Range Rover.

Hi chief got this code from a range rover that was scanned recently, the transmission was definitely abused with the wrong oil on scanning we got the following codes.

P0613-00
Transmission Control Module (TCM) processor.
History
2.3. U0155-87
Lost communication with instrument cluster control module.
History
2.4. U0102-87
Lost communication with transfer case control module
History
2.5. P0741-00
Torque Converter Clutch (TCC) solenoid circuit performance or stuck in off position.
Permanent
2.6. P0736-00
Incorrect gear R ratio
Permanent
2.7. P0730-00
Incorrect gear ratio
Permanent
2.8. P0735-00
5th gear ratio incorrect


What should we be looking at for the fix?
Thanks

State equipment present and price

Thanks guys, got few people who reached out. We move

This are pictures showing how the space is arranged and the kind of work we do.

35% per annum!! Note its not 35% return per month, and if the initial post was read well, you'll see that as an investor you're buying the equipment directly, it's not internet business it's you investing in a existing autoshop that wants to expand. Like a mechanic shop where people actually work. Mechanics and technicians.

Well, I assume you'll see it as a scam because as the country is structured now it's difficult for small businesses to access bank loans and have to look into other means.

benson4u:
So where is the company located or going to be located?

kindly drop your email so i can send any further details you may require sir.

benson4u:
So where is the company located or going to be located?

Its currently running and located in warri delta state.

Hi guys,

This is an opportunity to invest in a real business, an auto repair shop.

auto repairs is constant and steady as road transportation is a major means of transportation in nigeria, there is also a major lack of capable technicians, our business is looking to expand into tire shop service, providing alignment and balancing services, we are looking to get investor to buy equipment and get steady monthly return over 12 month to give them their capital and 35% profit on invested capital.

We have a great location and capable technicians to ensure constant remittance, also whatever vetting process or documentation necessary would be looked into.

the company is registered and ready to go.

This is an opportunity for a passive steady income.

ask me any further questions you may have.

Hi Guys,

I would like to know if anyone is clearing out a tire shop, that has a wheel balancer and alignment gauge tha would be interested in talking on deals for those equipment. Please reach out, we have a good business area that is in need of this equipment.

Also if anyone would like to use it as a means of passive income through monthly remittance, we are open to discuss.

thanks guys

In need of a 2016!! Do you have any??

Do you currently live in warri or around warri and you have been having difficulties in getting some of your car troubles handled, kindly drop your issues, let's discuss it here and leverage on the knowledge of the gurus in the house to help you fix it.

Make una yarn una wahala.

Better still, get a comprehensive diagnosis done on the car, it will reveal the issue and help the technician fix it. where is your location?

Anyone with a clean Nigerian used highlander 2010 here?

Great how do I contact you, here's my WhatsApp though, 08064885032

kingreign:

Location of truck matters alot.

Vehicle can be driven to workshop location, but truck is presently in warri Delta state

Hello car techs, I'm looking for a workshop capable of changing the frame of a rusting toyota 4runner. It is a 2004 model. Thanks guys

Can it fly for 3.3m

Gptech:

The type of equipment matters, equipment with pumps and compressors normally need around 3 times their rated power to start, if that's the case here you'll need a gen of around 16kva.

Wow!! I actually would power 3hp compressor. I think 7.5kva should do. Thanks

TrebleChamp:
Yes but only if the it has a minimum of 13hp engine. You should rather get at least a 9 to 10kva Gen to comfortably power your 7hp equipment....

Yes it's being powered by a 13hp engine. Thanks

Good information here, please i want to power around 7hp of equipment, can a 7.5kva petrol generator work for this?

DeClan01:
I have completed my application since February but i got a text message from NYIF on mail verification yesterday, clicked on it and then it brought out 'email already verified' . Anyone here got the same?

Attached below is the screenshot of the text

Yea i got the same!!! I don't know if it's a glitch or they are just testing something. We wait patiently

Guys after a week of torture, i finally have my application submitted.

Keep trying especially between 3am and 5am

And like someone suggested keep your details in a note pad and copy as you go

The mental torture this NYIF website is giving is very very serious, has anyone gotten a hack as to when to apply? Maybe there's a particular time the server is good and we should try, was up all night still to no avail.
Any pointers??

Your mechanic should have ran a fuel pressure test on the pump to know if it holds pressure or not before changing it, install an oem pump and do a tune up, that should sort the issue.