₦airaland Forum

deomello:
Posted and recycled like hundred times in this thread.


Abeg close up shop if una no have anything new to post...


BTW, look at the big and scary blue winch building with small entrance door.

I swear if you enter this monstrosity, you no go come out alive..mba

Pleaae, this thread is mend for senior industrialist, not sweet and chewing gum industries on that yoruba thread....

SAMPLE LEDS TECHNOLOGY.


Sample-Leds Technology Resource Ltd. has 8 (Eight) years experience on Led screen service, we have under gone changes, development and innovations in led screen industry. We are confident that we have something unique and special to offer to the world. We promise to continously provide Standardized and Reliable services.
Sample-Leds Technology is leading the LED lighting revolution and making energy-wasting traditional lighting technologies obsolete through the use of energy-efficient, environmentally friendly LED lighting.
We design and install competitive high-quality Led lighting systems, Led Screen Display, Solar Street Lighting, Mixed Light Colour Fountain Water, Led lighting text fixtures, etc.
The Sample-Leds Technology team will totally contribute to provide robust and reliable Led lighting systems worldwide to make a better and more sustainable world.

Igbo's are the Greatest

Edge medical centre

Description
Edge Medical Center is a private, fully equipped, ultra modern 50 bed medical center located in Owerri, Imo State, Nigeria, providing extensive general and specialist healthcare with diagnostic services.. We offer the most technologically advanced medical facility for inpatients and outpatients, comfortable accommodation as well as highly trained staff who provide outstanding healthcare and diagnostic services. We provide individualized care to every patient. The hospital runs a 24 hour service including Sundays and public holidays.
MISSION STATEMENT
Our aim is to be the best private healthcare provider in Nigeria. We aspire to address every aspect of our patients’ healthcare needs and to improve each patient’s quality of life by bringing together the right medical components with a view of providing access to highest quality healthcare services to our people and our community
THE EDGE PHILOSOPHY
The hospital is committed to excellence in the provision of healthcare tailored to the needs of the individual. At every stage of your treatment, we endeavor to empower our patients with the knowledge and information that will enable them to actively participate in their treatment and early recovery.
Overall, our commitments are as follows:
•To be the hospital and provider of choice in innovative and complex care.
•Excellence in clinical care by delivering current medical care of the highest standard.
•Evidence based practice and delivery of culturally competent care in a healing, comfortable and homely environment.
•Professional environment that attracts and retains highly qualified staff.
•Creation of a supportive team environment for patients, employees and clinical staff.
•An organization that values the diversity of its staff and patients
Dr. George Ego-Osuala, BM,BCh, FACP, KSC who is a Consultant Physician and a Fellow of the American College of Physicians is the Founder/Owner and Medical Director of the medical center. He has been in medical practice for 40 years (since 1976). Though, a US-based Nigerian Medical Doctor, he transitions home to give back to his community

raker300:
if we start listing igbo owned industries here...nairaland won't contain.

Just that they won't allow us

CLINTONEL, Aba

Description
At CLINTONEL Nigeria, we specialize in helping people transform their ideas into product designs (3D models), making prototypes (3D printing) of designs and building tools (moulds) for manufacturing.
We design and fabricate both metal and plastic prototypes. We have a line of Advanced Manufacturing Equipment including an industrial 3D printer (Rapid Prototype Machine). Our team is highly skilled in Computer-aided Design (CAD) and Computer-aided Manufacturing (CAM).
Get in touch with us for more information on turning your ideas into products.
website: www.clintonel.biz
phone: 0806 890 2331

okoson aluminum company

OKOSON aluminium company.


Okoson Aluminum Company, we specialize in construction of quality, durable and reliable aluminum Windows, Doors, Glass house, Cutting wall, Cladding, Partitioning, Stainless Rails,Wardrobe,Show-Glass etc. We offer aluminum fabrication and installation to :
* Individuals 
* Engineers 
* Construction Companies 
* Banks 
* Industries 
* Churches 
* Ministries 
* Local, State and Federal Governments. 
* Other Corporate Bodies 
Our mission is to reinstall quality and standards in our country's building industry aiming at giving your building a beautiful and attractive look using latest world class aluminum profiles. 
Our vision is to revitalize the Nigerian building pattern to world class standards. 
Distance is not a Barrier as we work any were in Nigeria moving our machinery and workforce even to your site. 
100% work satisfaction is guarranteed
Call Us Today ....+2347032184206
Email.... okosonaluminum@gmail.com
Website.. okosonaluminum.com









more companies owned by the Igbo's....
Mikko plastics
Tonibros industries limited
Devten limited
system metal industries
ABA textile mills
El- nonaproda and co ventures
starline groups
macvinz industries services
stemme Nigeria limited
Twinangels chemicals
Bexol constructions may and bin Nigeria limited
Nikmiracle industries big
Raldez industries limited
multi plastics
okemmiri and sons Nigeria
Egyikdon resources big
fobie tarpaulins company

[quote author=deedeedee1 post=58625773]Baba go and read form page 1[/quuote]
What I saw are just stories with peoples pictures...
no technological innovations....

deedeedee1:
[s][/s] You are a looser. Start from page 1 and stop asking me same question. LOOSER!!!!

What I saw there are just stories and peoples pictures

deedeedee1:
[s][/s]
LOOSER!!

Show one land mark technological innovations achieved by a Yoruba man.....

What have Yoruba's produced...

Going around compiling all the list of tailors and shoe makers in Ibadan is not and never technological innovations

List of some English fashion designers of Igbo extractions....

Celebrity fashion academy

Dondav designers

City crown designers

Designers musk

Stanza fashion code design

Emma best xclusive fashion

Addurah creation

Taikih design

Dress code fashion design

Johnek brothers and company

First class creation ventures

Alex Spencer

peemark investment Nigeria

UC king tailors

Emenike ole fashion world

Great George fashion plaza

Darphee junh designers

Henry unisex fashion designers

Ibemummy fashion designers

Johnywax tailoring company

De world moss designers

Onyi limited

Riga and the masterpiece

Ezi designers

Sonland Exclusive designers

Emes fashion designers

Sammy pens designers

Hylook fashion international

Judes trading company

Bliss concept

Eve designers

Reward international media

Pure designers

poon clothiers

Self discovery designers

MBA fashion world

Emeco garment industry

sister Ann fashion design

John the designer

Mercy fashion and design

lilly fashion designers

pins west designers

Noyeck excel creative industry

Amarachi fashion and design

Stalls fashion

Sylvjunica fashion

Ify fashion and design

fashion option

Yeeo standard tailors

Queen fashion designers

bro Jonas fashion

Joe moore designers

Obi fashion house

mobile creations

Cj digital prints

Akanno Fashion designers

Gee classic concept

UK text Nigeria

Nkechinyere fashion design

Nelo creation Nigeria

Ray fashion republic

prince production

Destiny creation garment

Twins fashion designer

Chuks deaigners Nigeria

Obitex standard tailors

Nkeonyere fashion centre

Ifeanyi tailoring services

Anibros international tailors

Favour fashion designers

Blissful light

Reflex computerized

De crown garment

Igbo's are posting...
Igbo made G wagoon
Igbo made beast and luxury cars
Igbo made fighter jet maintenance spareparts
Igbo made motorcycles
Igbo made tricycles
Igbo made phones
Igbo made tablets and iPads
Igbo made cements
Igbo made automotive spare parts
Igbo made shoes, clothes, belts ,etc
Igbo made military boots, and wears
Igbo made fridge and refrigerator
Igbo made chairs , tables and furniture's
Igbo fabricated components...
Igbo made rice and foods
Igbo made wines and juice
Igbo made perfumes and cosmetics
Igbo made cable wires
Igbo made power generating sets and device.
Igbo made aluminum zincs and roofing
Igbo made military armoured cars
Igbo made sanitary trucks
Igbo made beverages
Igbo made ceramics and glass wares
Igbo made solar powered tricycles ETC
Igbo's have produced virtually everytin except few....
This is what is called technological innovations.....
YORUBA.... what do you produce...... YORUBA are still posting sweet and chewing gums.. YORUBA on 140 pages but still posting stories and pictures of people...
FOR THE LAST TIME....yoruba wat do you produce.... What landmark technological innovations have Yoruba done..

Igbo's are posting...
Igbo made G wagoon
Igbo made beast and luxury cars
Igbo made fighter jet maintenance spareparts
Igbo made motorcycles
Igbo made tricycles
Igbo made phones
Igbo made tablets and iPads
Igbo made cements
Igbo made automotive spare parts
Igbo made shoes, clothes, belts ,etc
Igbo made military boots, and wears
Igbo made fridge and refrigerator
Igbo made chairs , tables and furniture's
Igbo fabricated components...
Igbo made rice and foods
Igbo made wines and juice
Igbo made perfumes and cosmetics
Igbo made cable wires
Igbo made power generating sets and device.
Igbo made aluminum zincs and roofing
Igbo made military armoured cars
Igbo made sanitary trucks
Igbo made beverages
Igbo made ceramics and glass wares
Igbo made solar powered tricycles ETC
Igbo's have produced virtually everytin except few....
This is what is called technological innovations.....

YORUBA.... what do you produce...... YORUBA are still posting sweet and chewing gums.. YORUBA on 140 pages but still posting stories and pictures of people...
FOR THE LAST TIME....yoruba wat do you produce.... What landmark technological innovations have Yoruba done....

deomello:
Even sef, you are the smartest, the richest and the most industrious, but nothing to show and you are tired and dead at only page 23 on NL, even after repeating posts, stealing achievements from other people and countries and recycling the same posts over and over again.


We know all the chest and industrious claims are all fake and you just confirmed and exposed that lie with your own thread.

Do you think, everyone is foolish,.....going about posting all the shoe makers and cloths designers in Yoruba land....that is not technological innovations....

If all the designers in aba are posted here....the page will get to 1million

you guys go about posting sweet and chewing gum industries .......

deomello:
Even sef, you are the smartest, the richest and the most industrious, but nothing to show and you are tired and dead at only page 23 on NL, even after repeating posts, stealing achievements from other people and countries and recycling the same posts over and over again.


We know all the chest and industrious claims are all fake and you just confirmed and exposed that lie with your own thread.

Youngman forget nairaland.........

Even your kinsmen knows very well that Igbo's are the most industrious and successful tribe in Africa.....

like I said, forget nairaland.... it does not change anytin....

Yoruba still posting sweet and chewing gum, while Igbo's are posting...
Fighter jet and G wagoon.....
IGBOS ARE THE GREATEST

Deedeedee3:
Arewa are bullshiit. They cant do shit. If they want to be president, they should declare Arewa republic or shout their fuccking mouth!
Declare Arewa republic you fuccking parasites!
Everybody wants out, only this worthless hausas are still scared of leaving the country.
They must be stupid for thinking Nigeria will last forever. Nigeria will seperate one day( if not soon).
Yoruba fear you not!

But you are always against IPOB that is championing the course

Where Igbo knowledge start, na where, yoruba own stop

ONITSHA —The Nigerian Air Force, yesterday, signed a Memorandum of Understanding, MoU with Innoson Vehicle Manufacturing Company, IVM, Nnewi, Anambra state for research and production of spare parts for its fighter jets.
The Chief of Air Staff, Air Marshal Sadique Abubakar, told newsmen in Nnewi, Anambra that the collaboration between the company and the Air Force had kept its jet fleet running for months now.
Abubakar, who was represented by the Chief of Policy and Planning, Air Vice-Marshal James Gbum, said the MoU would further solidify the collaboration, improve local content and engineering as well as save the country a lot of foreign exchange used in importing the expensive parts.
He said: “Our war efforts will be in vain if we don’t do something to ensure we get spare parts because some of our fighter aircrafts that have formed the back-bone of our struggle against Boko Haram, were once down due to lack of spare parts and mainly the break assemblies of these aircrafts.
“The Air Chief immediately ordered our research and development cell in Kaji to start to research into this break assembly overhaul. They went ahead and carried out the research. However, the first proto-type they brought couldn’t pass the test.
“The Nigerian Air Force later discovered that Innoson Vehicle Manufacturing Company at Nnewi, Anambra State is very capable of collaborating with the Nigerian Air Force to achieve the required standards of overhauling our break assemblies.”

yoruba too small for where Igbo's da....forget nairaland... even a common yoruba man knows that one..

ONITSHA —The Nigerian Air Force, yesterday, signed a Memorandum of Understanding, MoU with Innoson Vehicle Manufacturing Company, IVM, Nnewi, Anambra state for research and production of spare parts for its fighter jets.
The Chief of Air Staff, Air Marshal Sadique Abubakar, told newsmen in Nnewi, Anambra that the collaboration between the company and the Air Force had kept its jet fleet running for months now.
Abubakar, who was represented by the Chief of Policy and Planning, Air Vice-Marshal James Gbum, said the MoU would further solidify the collaboration, improve local content and engineering as well as save the country a lot of foreign exchange used in importing the expensive parts.
He said: “Our war efforts will be in vain if we don’t do something to ensure we get spare parts because some of our fighter aircrafts that have formed the back-bone of our struggle against Boko Haram, were once down due to lack of spare parts and mainly the break assemblies of these aircrafts.
“The Air Chief immediately ordered our research and development cell in Kaji to start to research into this break assembly overhaul. They went ahead and carried out the research. However, the first proto-type they brought couldn’t pass the test.
“The Nigerian Air Force later discovered that Innoson Vehicle Manufacturing Company at Nnewi, Anambra State is very capable of collaborating with the Nigerian Air Force to achieve the required standards of overhauling our break assemblies.”

SonofDevil:
mr bank deposit re these the only pictures in your archives i have seen it more than twice in this thread

Leading in education how
Please don't bring up waec miracle centers result oo an aVerage anambra man is an trader or apprentice after ssce exam straight to southwest to learn trade.

Indigenous companies indeed , how come south east is competing with book haram region in IGR

In sports

Innovate kini Tell me 5 innovation of igbos that has received international recognition


Leading nollywood check again and comeback with a reliable statistics not beer palour or aba made stats

Keep quit.....

SPORT......how many yoruba da super eagle
who own Enyimba, FC Ifeanyi una, Enugu rangers..
KANO nwanko, okocha and co...Are they from yoruba?

NOLLYWOOD....what is the common language use in Nollywood.,even funke, Eliot and co,was brought up by the Igbo film maker...how many yoruba are into Nollywood.....you want to steal Igbo film body...Northerners have gotten kanywood.,Don't go and look for your own Yorubawood...keep claiming nollywood .


G wagoon, yoruba no fit produce...

Fighter jet...Yoruba no sabi

Beast and luxury ride.....Yoruba no sabi


Were una follow self...

For education, Igbo's Don overtake una....

For commerce, that one na no go area for yoruba...

where una follow

YORUBA BEGGARS

INNOSON PLASTIC PRODUCTS

ANAMMCO Automobile , ENUGU

AQUA RAPHA yoghurt and confectionery, ENUGU

GIMPAT ALUMINUM

ZINOX iPads and tablets own by Leo Stan eke

Tonimas construction company

very soon we will start manufacturing Fighter jets
Innoson is already fabricating its components...

ONITSHA —The Nigerian Air Force, yesterday, signed a Memorandum of Understanding, MoU with Innoson Vehicle Manufacturing Company, IVM, Nnewi, Anambra state for research and production of spare parts for its fighter jets.
The Chief of Air Staff, Air Marshal Sadique Abubakar, told newsmen in Nnewi, Anambra that the collaboration between the company and the Air Force had kept its jet fleet running for months now.
Abubakar, who was represented by the Chief of Policy and Planning, Air Vice-Marshal James Gbum, said the MoU would further solidify the collaboration, improve local content and engineering as well as save the country a lot of foreign exchange used in importing the expensive parts.
He said: “Our war efforts will be in vain if we don’t do something to ensure we get spare parts because some of our fighter aircrafts that have formed the back-bone of our struggle against Boko Haram, were once down due to lack of spare parts and mainly the break assemblies of these aircrafts.
“The Air Chief immediately ordered our research and development cell in Kaji to start to research into this break assembly overhaul. They went ahead and carried out the research. However, the first proto-type they brought couldn’t pass the test.
“The Nigerian Air Force later discovered that Innoson Vehicle Manufacturing Company at Nnewi, Anambra State is very capable of collaborating with the Nigerian Air Force to achieve the required standards of overhauling our break assemblies.”

Tonimas hotel, Neni

More of Tonimas products

Tonimas plastics Aba