₦airaland Forum

chizagi:
Available Designs
-
Classic =N= 5,600

Bond =N= 5,600

Shingle =N= 5,700

Roman =N= 5,800

Milano: =N=5,700

Ridge cap =N=1,800 Per meter

Valley Gutter =N=2,100 per meter

B.B.C =N=1,800 Per meter

facial board =N=2800 Per meter

treated nails =N=2500 per KG

sealant =N=5,000 A PACK

installation =N= 300 per square meter

At Edges stone coated roof sheets, we are your dependable home for top notch long lasting New Zealand stone coated roof sheets, call us today for supplies and installation services. you will be glad you did!!

Can you deliver to Imo state at that price?

chizagi:
Black color shingle: 5400 per square meter
Other colors shingles: 5500 per square meter
50 years guaranteed quality. made in New Zealand

Can you deliver and install in imo state at this prices?

chizagi:
Available Designs
-
Classic =N= 5,600

Bond =N= 5,600

Shingle =N= 5,700

Roman =N= 5,800

Milano: =N=5,700

Ridge cap =N=1,800 Per meter

Valley Gutter =N=2,100 per meter

B.B.C =N=1,800 Per meter

facial board =N=2800 Per meter

treated nails =N=2500 per KG

sealant =N=5,000 A PACK

installation =N= 300 per square meter

At Edges stone coated roof sheets, we are your dependable home for top notch long lasting New Zealand stone coated roof sheets, call us today for supplies and installation services. you will be glad you did!!

Can you supply and fit in IMO State? What are your current prices and how much notice do you need? What is the logistics?

chizagi:
Bond and classic: 5400 per square meter
Shingle and milano: 5500 per square meter
Roman: 5600 per square meter

Are these your current prices? Can you deliver to Owerri in imo State?

Can you deliver original New Zealand stone coated roofing tiles. Shingles or Milano to Owerri. What are your current prices

Spyder have you bought internal doors? How much?

bigjay01:
you sure know your onions

spyder880:
The block of flats. .......

Oga Spyder, abeg how many bags of cement and trips of chipping did you use for the parapet alone?

spyder880:
Looks so smooth, is there any need still plastering this parapet?

Oga Spyder, abeg how many bags of cement and trips of chipping did you use for the parapet alone?

spyder880:
Scenes from the cast of the second concrete fascia, today.

Oga Spyder how much did the parapet carpentry work cost? And the cost of parapet iron work too?

spyder880:
About N2m for each decking.

Oga Spyder does the N2m price include labour cost? I mean cost of supervision, iron bender , carpenter etc?

spyder880:
There is always a next time bro, you should have sent me a mail also, I am always on the move, sometimes I work in sites where there is no network. Waiting for the next house.

Brother , I spent 2.7m and am even crying more. It's a 3 bedroom flat .

spyder880:
Local stones all the way....

Wow...do we use local stone to build upstairs?is it recommended?i thought it was clippings or nothing?please advise

spyder880:
About 220 bags, 45 tons of stone,

Thanks Spyder. Did you deck with clippings ( granite) or stones ( local stone)?

spyder880:
About N2m for each decking.

Roughly around how many bags of cement and tonnes of granite did you use on each deck?

spyder880:
Roofing carpentry works almost complete.

Oga Spyder abeg how much did each of deck cost you?

allen0000:
Ask me any question about Malaysia and I am here to give you a useful and helpful information starting from Living, Visiting, Education, Business, How Nigerians are Living here, the Nigerian Embassy and other things.........Note: No phone number, No Email address, No contact me and finally just to give you a tip and information about Malaysia. Thats all

My brother I sent you a property related email, please assist.

spyder880:
From the street. ...

Please can I have an itemised break down of your decking cost / expense for material and labour. Abeg

spyder880:
The way the house looks now

Please can I have an itemised break down of your decking cost / expense for material and labour. Abeg

spyder880:
The way the house looks now

Nwanne you too much...that's all I can say

spyder880:
It's a challenging environment but after everything considered, the total cost of all the materials, labor, logistics, settlements of area boys and supervision cost is N2.9m. This includes some of the construction we did to the walls in the dining section. It's a wide decking with cantilevers.

This is too high Spyder how did you come up to that figure?

gabbytabby:
Call me on 0802 859 3845 9ja number.

Thanks. Will definitely do. I guess it's late now nija time, hence I will call you tomorrow by God grace.cheers

gabbytabby:
The concreman.

Madam Gabby, it's me Edwin in UK. spoke to you last year. Abeg I gave just sent you a mail, your UK number is not going through. Need your help please

gabbytabby:
You will need at least 2m

16mm : 3ton--300
12mm : 4ton-400
8mm:1ton-'100
Binding wire:20

1x12x12:400-'300k
2x3:150:45
Bamboo:300--60(not new)
sundry other wood 10k
transport - 30
Nail:4 bags:20

granite:60ton--260
sharp sand:50ton-158
Cement:165-297

welder / Elec/carpentary work:200
concreteman-150
electrical materials 50k
no conduit plumbing so no plumbing cost.
omonile
decking party 40k

We used inner beam such that if yours is outer then more cement and other aggregates. Also ours is less than one pako and I have done one that was more than one pako with beam before.

Iron was also cost of all iron up to decking.

Madam Gabby abeg I need to reach you. I just sent you an email on your al...properties email. Please help call me or drop me your new number

spyder880:
Around N2.5m.

Is 2.5m not on the high side?what is the break down.

petikal:
That's cheap man; just 4mil/yr at full capacity, and one still has to factor in maintenance costs.

How much do you figure it'll cost in total to complete the property?

Who said 4 million a year is small money?remember this is 4 million a year for the rest of your life....wow that is solid by all standards. The key question is this, if you did not build the house what would you have used that money for?cars, holidays?..??.

lafolabi:
We used, both 6inch and 9inch block.

Boss, how many of each did you use please?

Cool:
Good day,

We're planning to construct the first floor of a building. So, we asked for quote that will take us from the decking to roof (decking already constructed). It is a single 4-bedroom apartment and we got the quotes below.

Total number of blocks estimated: 3000
Bricklayer's labour bill for setting block up to roofing level (his exact words): N450,000
Carpenter's workmanship: N65,000
Iron bender workmanship: N75,000

Other information:
1. There are 2 staircases in the plan. We expect the construction of the stairs to be included in the quotes. Do you think they've included these costs?
2. There are 20 pillars in the plan.
3. Site is in Ibafo, Ogun State

I'd like to hear from the experienced people on this forum before we talk to the workmen because right now, I'm alarmed, to say the least.

Thanks.

Cool

Just doing something similar now but mine is from German floor to lintel.

3000 blocks paying mason plus their labour 45 naira per block and that covers even all the broken pieces. I negotiated that much because of the potential for broken pieces.

Iron bender - I am in the process of negotiating with my iron bender . He takes 3500 per day and says the entire project will take him about 3 to 4 days. So I am aiming at negotiating at between 12k and 17k max. Will let you know what I paid eventually.

A good way of doing it is asking them their day rate ( which must fall between 3000 and 4000) and ask them how long it will take them to do. On that basis you can come up with a contract price which has to be less than the daily rate. Hope it goes well for you.

NairaBaba:
The 7k per flat is the estimated Carpenter labour cost we paid for this project. Each flat is two bedroom, all materials including nails were bought by us. As I said in one of the previous posts, it's for lintels only (and few adjoining columns). We cast most of the columns before Lintel.

Thank you so much my broda. You are a star.

lafolabi:
Construction is what we know best.
Our phone number. 08066357743 or email. Unisociate@ymail.com.

Oga, how many 9inch blocks doc you use for this stage ( from German floor to lintel)?

spyder880:
From the outside, casting with concrete starts Monday morning.

Oga spyder, how many blocks did you use to lintel level from the decking?

spyder880:
Just before the third decking.......

Oga spyder how many blocks did you use for the 1st floor ( from deck one to deck two)?