Nice

Good

Ok

Nice one

Nice

Engine Pix please.

Thanks

Nice one

Please how much is this Nissan sentra now.
I will also like to find out the price of corolla 2000-2002

Thanks

Clean Ride and despite been Nigeria used.
Good owner.

KolaShangOne:


The thickness of all the items depend on the thickness you bought from the factory. Commonly used thickness for residentials are 0.45mm (for bungalows) and 0.55mm (storey buildings). We also have 0.7mm for factories.

1) cladding is done on the facial board of the house. Usually 225mm breadth.
2) ceiling cladding sheet. I refer to this as external ceiling. It is the space between your external block work and roof. Usually 500mm breadth.
3) eaves angle. flat sheet. Cut and bent.
Used to tape the out-shoot of the Aluminium from the roof. To make it look neater.4-6inches
4) ridge angle. Ridge cap is the name. Used to cover where Aluminium sheets meet. Pic attached. Usually 24inches
5) Gutter trimming: Used to cover the top of the gutter. Flat sheet cut to size.2-3inches

Thanks for your response and I didn't see the pix attachment as there was no attachment.
I will appreciate if you can reattach it.

Lanre01:
I dnt've much idea 'boh de woodwork buh I guess its different

Thanks for your response...

HsLBroker:
no this is stepped tiles aluminum sheet

If I may ask, is the roofing wood work for Aluminum step tile and Long span different or it is same roofing wood work that support both.

Lanre01:
No Sir.. thats Aluminium Step tile... this is Long Span below

If I may ask, is the roofing wood work for Aluminum step tile and Long span different or it is same roofing wood work that support both.

Thanks

Please I will like to confirm if this sample Aluminum sheet is also called Aluminum Long span.

Please I will like to confirm if this sample Aluminum sheet is also called Aluminum Long span.

Please I will like to confirm if this sample Aluminum sheet is also called Aluminum Long span.

Please I will like to confirm if this sample Aluminum sheet is also called Aluminum Long span.

Dear Expert in the house, please I will need your education on the following aluminum roofing related items.
I will like to know the thickness of the following items in terms of "mm" and if possible I will appreciate anyone that can help me with pictures of the items.

1) Cladding sheet
2) Ceiling Cladding sheet
3) Aluminum Eave angle
4) Aluminum Ridge angle
5) Aluminum Wall trimming

brabus:


Sir KolaShangOne, tell me you didn't see the inconsistencies in the quote.
I understand that part but you didn't see that I also queried wall trim and eave angle.

Cladding is normally 0.25m (no assumption/approximation) while eave angle and wall trim is 0.150 girth. How come they're (wall trim and eave angle) more than the cladding in the estimate?

What about the scary figures? .55 is normally N1,150 (figure coming from installer who go chop hin own o), how come we got N1,750?

I don't like doing this online but I think the contractor is more of an enemy than a friend to this client.

Informative comment

KolaShangOne:
Pic 1: Sorting out the aluminium into sizes..

Pic 2: Eaves angle, Ridge cap, gutter trimming, wall bracket etc etc..

Please I will like to find out from you if the Aluminum roofing sheet cost per s/m as Ridge angle,Eave angle,Buttom angle and wall trimming?
I will appreciate your prompt response and thanks

HsLBroker:
check your email

I just checked my mail now, I appreciate your email response and will keep you posted.

HsLBroker:


You are welcome.

Yes but flat sheet are non corrugated aluminum sheet, they are what we use in bending ridges, eave angles, bottom angles, wall trimmers but ceiling cladding are corrugated to mentral, aluminum roofing sheets are also flat sheets that we corrugate into long span, stepped tiles, Metcopo or mentral.

If you don't have parapet attach to your roof, you will need all this things.

I live in mowe, I can have a look at your property.

Regards.

Thanks for your response and attached is the type of aluminum I will like.
Is it possible to send a quote based on the quantity of items on that quote osarodon@yahoo.com

HsLBroker:
workmanship for 195sqm stepped tiles shouldn't be more than N150 per meter wish is N30, 000

Eave angle, wall trimmer, cladding sheets, ceiling cladding, bottom angle and ridge caps can never be the same price comparing or quoting the prices equally is wrong and appear fraudulent because it, can proving, stepped tiles roofing sheet is wider at about 1000mm compare to ridge cap which is about 500mm, wall trimmer, bottom angle is 150mm, eave angle 300mm

For instants if ridge cap is N750 per meters, eave can't be more than N350 per meter.

Where is this project located?

Thanks for your informative contribution
Project site: Mowe
Please I will like to ask the following questions
1) Are all these items listed needed for the roofing project?
2)Is Flat sheet 0.45 for flashing same as Aluminum ridge angle ?

Thanks for your time.

Please can someone help verify if these are correct needed items or if there is over quoting on material list.
Thanks

Nice job

NICE ONE

Nice and informative thread and thanks to the originator.

Are you still selling the Euro?

wizecoder1:
Hello Guyz, I have Euro for sale for conventional outbound wire transfer and Form M as some of the funds are export proceeds.PM if you need it.
Current rate 1EURO= 275 Naira

Price? and location address

Attached pix was sms sent by the fraudsters pretending to be Interswitch staff and they will be asking for your ATM number and pin, please beware and avoid them because they are criminal element who are out to wipe your hard earn cash.

With all sincerity and open mind without any party affiliation, do they have to clear Jonathan's mess if any before fuel can be made available?

President Buhari is in a position that I always say that after God in Nigeria he is the next based on the presidential executive power attached to his office.

President Buhari should do the needful and make fuel available.

Jumia have done fraud by editing and moving the 2pm sales to 4pm thereby having 2 flash sales for 4pm.
Also note that they stylishly changed the Tecno C8 to Tecno C5.
[size=20pt]See cheats[/size]