Pipedraft's Posts
Nairaland Forum / Pipedraft's Profile / Pipedraft's Posts
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (of 18 pages)
 Jobs/Vacancies / Engineering Design, Piping & Seismic/well Logging Interpretation by pipedraft: 12:03pm On May 09, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSE TARGET AUDIENCE 1 AUTOCAD (2D/3D) Mechanical, Electrical, Material& Metallurgical Engineers/Trainee 2 PIPING DESIGN (PDMS) Mechanical, Chemical, Process Engineers/Trainee 3 PROCESS DESIGN & OPTIMIZATION(HYSYS) Process, Chemical Engineers/Trainee 4 RESERVOIR MODELING & WELL LOGGING(PETREL) Geologist, Reservoir Engineers, Geophysicist, Well Engineers Well site Geologist /Graduate trainee 5 PIPING &INSTRUMENTATION DESIGN (P&ID) Mechanical, Process, Electrical/Instrumentation Engineers/Graduate trainee 6 GEOPHYSICAL/GEOTECHNICAL SURVEY TRAINING Geologist, Geophysicist,Hydrogeologist, Civil/water engineer COURSE MODULE( AUTOCAD 2D/3D) Title: Engineering Design, Drafting & Modeling Overview: the course is design for student to have in depth knowledge to Engineering design and Procurement • Introduction to AutoCAD 2d Toolbar • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PETREL (SEISMIC & WELL LOGGING INTERPRETATION) COURSE MODULE •Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps •Identification of prospects. 3. PIPING DESIGN & DRAFTING (PDMS) COURSE MODULE: •Introduction to Plant Equipments type •Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, Fractionating columns. •Taking coordinate/Equipments position from plant plan drawing (GAD) •Using the Primitive method to design Equipments •Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) •Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, Gasket) etc •Piping Setting( Head/Tail setting) •Pipe specification in PDMS •Pipe Routing (Linking equipments with pipes) •Modifying the Head/Tail of a Pipe •Supporting Plant with Structures (Beams, Columns, Slab) 4. PROCESS DESIGN & OPTIMIZATION (ASPEN HYSYS) COURSE MODULE: •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMNETATION DESIGN/DIAGRAM (P&ID) COURSE MODULE: • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting Equipments (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting Equipments together with Process line • Assigning Tags to Equipments and Specification to process lines • Placing control instruments to process lines, Equipments and on control valves • Checking for Errors by running validation 6. GEOPHYSICAL SURVEY FOR GROUNDWATER & GEOTECHNICAL TRAINING: For Geologists, Geophysicists, and Hydrologist: This involves data Acquisition, Processing and Interpretation using appropriate Geophysical/Geotechnical Software’s. 7: STRCUTURAL DESIGN USING STAADPRO, ORION Training venue/Head Office: Suite 59, Sebuff Plaza, Jakande Roundabout, Lekki Expressway, Lagos. Branch Office: 26, Ikotun/Idimu Rd, College Bustop, Opp Domino Pizza Ikotun, Lagos kengeotech@yahoo.com call ( 08060360538, 08028553955) For registration details |
| Career / Relevants Engineering Design & Exploration Courses For Graduates by pipedraft: 11:55am On May 08, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSE TARGET AUDIENCE 1 AUTOCAD (2D/3D) Mechanical, Electrical, Material& Metallurgical Engineers/Trainee 2 PIPING DESIGN (PDMS) Mechanical, Chemical, Process Engineers/Trainee 3 PROCESS DESIGN & OPTIMIZATION(HYSYS) Process, Chemical Engineers/Trainee 4 RESERVOIR MODELING & WELL LOGGING(PETREL) Geologist, Reservoir Engineers, Geophysicist, Well Engineers Well site Geologist /Graduate trainee 5 PIPING &INSTRUMENTATION DESIGN (P&ID) Mechanical, Process, Electrical/Instrumentation Engineers/Graduate trainee 6 GEOPHYSICAL/GEOTECHNICAL SURVEY TRAINING Geologist, Geophysicist,Hydrogeologist, Civil/water engineer COURSE MODULE( AUTOCAD 2D/3D) Title: Engineering Design, Drafting & Modeling Overview: the course is design for student to have in depth knowledge to Engineering design and Procurement • Introduction to AutoCAD 2d Toolbar • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PETREL (SEISMIC & WELL LOGGING INTERPRETATION) COURSE MODULE •Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps •Identification of prospects. 3. PIPING DESIGN & DRAFTING (PDMS) COURSE MODULE: •Introduction to Plant Equipments type •Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, Fractionating columns. •Taking coordinate/Equipments position from plant plan drawing (GAD) •Using the Primitive method to design Equipments •Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) •Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, Gasket) etc •Piping Setting( Head/Tail setting) •Pipe specification in PDMS •Pipe Routing (Linking equipments with pipes) •Modifying the Head/Tail of a Pipe •Supporting Plant with Structures (Beams, Columns, Slab) 4. PROCESS DESIGN & OPTIMIZATION (ASPEN HYSYS) COURSE MODULE: •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMNETATION DESIGN/DIAGRAM (P&ID) COURSE MODULE: • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting Equipments (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting Equipments together with Process line • Assigning Tags to Equipments and Specification to process lines • Placing control instruments to process lines, Equipments and on control valves • Checking for Errors by running validation 6. GEOPHYSICAL SURVEY FOR GROUNDWATER & GEOTECHNICAL TRAINING: For Geologists, Geophysicists, and Hydrologist: This involves data Acquisition, Processing and Interpretation using appropriate Geophysical/Geotechnical Software’s. 7: STRCUTURAL DESIGN USING STAADPRO, ORION Training venue/Head Office: Suite 59, Sebuff Plaza, Jakande Roundabout, Lekki Expressway, Lagos. Branch Office: 26, Ikotun/Idimu Rd, College Bustop, Opp Domino Pizza Ikotun, Lagos kengeotech@yahoo.com call ( 08060360538, 08028553955) For registration details |
| Jobs/Vacancies / Industrial Attachment /intenship Students Needed by pipedraft: 11:46am On May 08, 2018 |
INDUSTRIAL ATTACHMENT /INTENSHIP STUDENTS NEEDED Geoken Tech Services Nig Ltd: is a Geophysical, Geotechnical/Engineering design & Procurement firm base in Lagos. We are in need of an Industrial attachment Students. REQUIREMENTS: 1. BSC/HND IN VIEW (GEOLOGY/GEOPHYSIC OR CIVIL ENGINEERING) 2. MUST BE RESIDING WITHIN EGBEDA/IKOTUN & ITS ENVIRONS 3. SHOULD HAVE A WORKING LAPTOP 4. MUST BE A ABLE TO PROMOTE THE SERVICES OF THE COMPANY N.B: This position is strictly for IT Student. INTERESTED APPLICANT SHOULD SEND CV TO: kengeotech@yahoo.com Resumption Date: As soon as Possible TEL NO: 08060360538 ADDRESS: SUIT 15, KAZAM PLAZA, COLLEGE BSTOP, OPP DOMINO PIZZA, IKOTUN- LAGOS |
| Jobs/Vacancies / Geophysical Survey Training 4 Geologists by pipedraft: 4:18pm On May 03, 2018 |
GEOPHYSICAL SURVEY TRAIINING FOR GROUNDWATER EXPLORATION The aim of this course is to expose Geoscientist, Geophysicist, and Hydrologist to application of groundwater software GEOPHYSICAL /GROUNDWATER SURVEY TRAINING 1. Methods of groundwater exploration 2. Electrical Resistivity Method 3. Self-Potential (SP) & Induced Polarization (IP) 4. Schlumberger & Werner Array Electrode configuration 5. Data Processing, Interpretation & Presentation 6. Curve Matching ( Ascending & descending curve) 7. Interpreting Resistivity survey curves types ( 3-layer case, 4 layer and 6 layer) 8. Resistivity values and aquifer characteristics 9. Resistivity data Processing using Win RESIST( 1D, 2D Inversion Methods) Resistivity data Interpretation and application (Data loading, Software . program interface, data preparation and organization) Training fee: #50,000 per candidate Who should attend: Geologist/Geotechnical, Civil Engineers, Environmental Engineers, Hydro geologist, Geophysicist. Contact: Geoken Tech Services Nig Ltd kengeotech@yahoo.com For more info: 08060360538, 08028553955 Suite 59, Sebuff Plaza, Jakande roundabout, Lekki- Lagos Mainland Office: Suite 15, Kazam Plaza,Opposite Dominos Pizza, College-Bustop, Ikotun. 08060360538/08028553955 Head Office: Sebuff Plaza, Suit 59, jakande roundabout, By Shoprite, Lekki- Lagos Oulet: 26, Ikotun/Idimu Road, Opposite Domino Pizza Ikotun, Lagos |
| Jobs/Vacancies / Groundwater Geophysical Training For Geologists,hydrogeologists by pipedraft: 3:58pm On May 01, 2018 |
GEOPHYSICAL SURVEY TRAIINING FOR GROUNDWATER EXPLORATION The aim of this course is to expose Geoscientist, Geophysicist, and Hydrologist to application of groundwater software GEOPHYSICAL /GROUNDWATER SURVEY TRAINING 1. Methods of groundwater exploration 2. Electrical Resistivity Method 3. Self-Potential (SP) & Induced Polarization (IP) 4. Schlumberger & Werner Array Electrode configuration 5. Data Processing, Interpretation & Presentation 6. Curve Matching ( Ascending & descending curve) 7. Interpreting Resistivity survey curves types ( 3-layer case, 4 layer and 6 layer) 8. Resistivity values and aquifer characteristics 9. Resistivity data Processing using Win RESIST( 1D, 2D Inversion Methods) Resistivity data Interpretation and application (Data loading, Software . program interface, data preparation and organization) Training fee: #50,000 per candidate Who should attend: Geologist/Geotechnical, Civil Engineers, Environmental Engineers, Hydro geologist, Geophysicist. Contact: Geoken Tech Services Nig Ltd kengeotech@yahoo.com For more info: 08060360538, 08028553955 Suite 59, Sebuff Plaza, Jakande roundabout, Lekki- Lagos Mainland Office: Suite 15, Kazam Plaza,Opposite Dominos Pizza, College-Bustop, Ikotun. 08060360538/08028553955 Head Office: Sebuff Plaza, Suit 59, jakande roundabout, By Shoprite, Lekki- Lagos Oulet: 26, Ikotun/Idimu Road, Opposite Domino Pizza Ikotun, Lagos |
| Jobs/Vacancies / Geophysical Survey Traiining For Groundwater Exploration by pipedraft: 3:01pm On Apr 26, 2018 |
GEOPHYSICAL SURVEY TRAIINING FOR GROUNDWATER EXPLORATION The aim of this course is to expose Geoscientist, Geophysicist, and Hydrologist to application of groundwater software GEOPHYSICAL /GROUNDWATER SURVEY TRAINING 1. Methods of groundwater exploration 2. Electrical Resistivity Method 3. Self-Potential (SP) & Induced Polarization (IP) 4. Schlumberger & Werner Array Electrode configuration 5. Data Processing, Interpretation & Presentation 6. Curve Matching ( Ascending & descending curve) 7. Interpreting Resistivity survey curves types ( 3-layer case, 4 layer and 6 layer) 8. Resistivity values and aquifer characteristics 9. Resistivity data Processing using Win RESIST( 1D, 2D Inversion Methods) Resistivity data Interpretation and application (Data loading, Software . program interface, data preparation and organization) Training fee: #50,000 per candidate Who should attend: Geologist/Geotechnical, Civil Engineers, Environmental Engineers, Hydro geologist, Geophysicist. Contact: Geoken Tech Services Nig Ltd kengeotech@yahoo.com www.geokentech.com For more info: 08060360538, 08028553955 Suite 59, Sebuff Plaza, Jakande roundabout, Lekki- Lagos Mainland Office: Suite 15, Kazam Plaza,Opposite Dominos Pizza, College-Bustop, Ikotun. 08060360538/08028553955 Head Office: Sebuff Plaza, Suit 59, jakande roundabout, By Shoprite, Lekki- Lagos Oulet: 26, Ikotun/Idimu Road, Opposite Domino Pizza Ikotun, Lagos |
| Jobs/Vacancies / Sesmic & Well Logging Training (petrel) 4 Geologists, Pet Engineers by pipedraft: 6:12pm On Apr 20, 2018 |
SEISMIC & WELL LOG INTERPRETATION (PETREL) TRAINING COURSE MODULE office: SebuffPlaza,Suit 59, Lekki Expressway, Osapa London, Jakande Roundabout Mainland Office: 26, Ikotun Road, College Bstop/opp Domino Pizza, Suite 15, Kazam Plaza, Ikotun-Lagos. www.geokentech.com CALL: GEOKENTECH: (08060360538/08028553955) kengeotech@yahoo.com •* UNDERSTANDING OF GEOLOGY OF NIGER DELTA •* PETROLEUM SYSTEMS •* INTERPRTATION & MANUAL CORRELATION OF LOGS (GAMMA, RESISTIVITY, DENSITY, NEUTRON) •* SEISMIC SECTION MANUAL INTERPRATION •* CHECK SHOT CORRELATION (OWT VS TVD) •* FAULTS, HORIZONS PICKING MANUALY ON SEISMIC SECTION •* MAP CREATION • * DATA IMPORTATION (SEISMIC, WELL DATAS (WELL HEADS, LOGS) INTO • PETREL •* WELL LOG CORRELATION WITH PETREL: ASSIGN WELL TOPS, PICKING • HORIZON * LOADING OF SEISMIC DATA INTO PETREL (SEG Y DATAS) •* PERFORMING SYNTHETIC SEISMOGRAM (SEISMIC-WELL TIE) •* FAULT & HORIZON MAPPING * GENERATING SURFACE MAP/ATTRIBUTE MAPS •* PROSPECT IDENTIFICATION • * VOLUMETRIC ANALYSIS TARGET AUDIENCE: GEOLOGIST/GEOPHYSICIST, PET ENGINEERS/RESERVOIR ENGINEERS, WELL ENGINEERS, JOBSEEKERS, NYSC MEMBERS • • Head Office: Sebuff Plaza, Suite 59. LekkiExpressway(Jakanderoundabout) By Shoprite Mainland Office: 26, Ikotun Road, Kazam Plaza ( Suit 15) Opp Domino Pizaa kengeotech@yahoo.com www.geokentech.com Starting Date: 23rd April- 7th May 2018 |
| Jobs/Vacancies / Training On Relevant Software For Engineers & Geologists In Lagos by pipedraft: 6:50pm On Apr 18, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSE TARGET AUDIENCE 1 AUTOCAD (2D/3D) Mechanical, Electrical, Material& Metallurgical Engineers/Trainee 2 PIPING DESIGN (PDMS) Mechanical, Chemical, Process Engineers/Trainee 3 PROCESS DESIGN & OPTIMIZATION(HYSYS) Process, Chemical Engineers/Trainee 4 RESERVOIR MODELING & WELL LOGGING(PETREL) Geologist, Reservoir Engineers, Geophysicist, Well Engineers Well site Geologist /Graduate trainee 5 PIPING &INSTRUMENTATION DESIGN (P&ID) Mechanical, Process, Electrical/Instrumentation Engineers/Graduate trainee 6 GEOPHYSICAL/GEOTECHNICAL SURVEY TRAINING Geologist, Geophysicist,Hydrogeologist, Civil/water engineer COURSE MODULE( AUTOCAD 2D/3D) Title: Engineering Design, Drafting & Modeling Overview: the course is design for student to have in depth knowledge to Engineering design and Procurement • Introduction to AutoCAD 2d Toolbar • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PETREL (SEISMIC & WELL LOGGING INTERPRETATION) COURSE MODULE •Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps •Identification of prospects. 3. PIPING DESIGN & DRAFTING (PDMS) COURSE MODULE: •Introduction to Plant Equipments type •Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, Fractionating columns. •Taking coordinate/Equipments position from plant plan drawing (GAD) •Using the Primitive method to design Equipments •Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) •Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, Gasket) etc •Piping Setting( Head/Tail setting) •Pipe specification in PDMS •Pipe Routing (Linking equipments with pipes) •Modifying the Head/Tail of a Pipe •Supporting Plant with Structures (Beams, Columns, Slab) 4. PROCESS DESIGN & OPTIMIZATION (ASPEN HYSYS) COURSE MODULE: •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMNETATION DESIGN/DIAGRAM (P&ID) COURSE MODULE: • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting Equipments (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting Equipments together with Process line • Assigning Tags to Equipments and Specification to process lines • Placing control instruments to process lines, Equipments and on control valves • Checking for Errors by running validation 6. GEOPHYSICAL SURVEY FOR GROUNDWATER & GEOTECHNICAL TRAINING: For Geologists, Geophysicists, and Hydrologist: This involves data Acquisition, Processing and Interpretation using appropriate Geophysical/Geotechnical Software’s. 7: STRCUTURAL DESIGN USING STAADPRO, ORION Training venue/Head Office: Suite 59, Sebuff Plaza, Jakande Roundabout, Lekki Expressway, Lagos. Branch Office: 26, Ikotun/Idimu Rd, College Bustop, Opp Domino Pizza Ikotun, Lagos Training Schedules/Dates: 23rd April – 7th May 2018 kengeotech@yahoo.com www.geokentech.com call ( 08060360538, 08028553955) For registration details
|
| Jobs/Vacancies / Seismic Interpretation & Engineering Design Training In Lagos by pipedraft: 3:16pm On Apr 07, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSE TARGET AUDIENCE 1 AUTOCAD (2D/3D) Mechanical, Electrical, Material& Metallurgical Engineers/Trainee 2 PIPING DESIGN (PDMS) Mechanical, Chemical, Process Engineers/Trainee 3 PROCESS DESIGN & OPTIMIZATION(HYSYS) Process, Chemical Engineers/Trainee 4 RESERVOIR MODELING & WELL LOGGING(PETREL) Geologist, Reservoir Engineers, Geophysicist, Well Engineers Well site Geologist /Graduate trainee 5 PIPING &INSTRUMENTATION DESIGN (P&ID) Mechanical, Process, Electrical/Instrumentation Engineers/Graduate trainee 6 GEOPHYSICAL/GEOTECHNICAL SURVEY TRAINING Geologist, Geophysicist,Hydrogeologist, Civil/water engineer COURSE MODULE( AUTOCAD 2D/3D) Title: Engineering Design, Drafting & Modeling Overview: the course is design for student to have in depth knowledge to Engineering design and Procurement • Introduction to AutoCAD 2d Toolbar • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PETREL (SEISMIC & WELL LOGGING INTERPRETATION) COURSE MODULE •Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps •Identification of prospects. 3. PIPING DESIGN & DRAFTING (PDMS) COURSE MODULE: •Introduction to Plant Equipments type •Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, Fractionating columns. •Taking coordinate/Equipments position from plant plan drawing (GAD) •Using the Primitive method to design Equipments •Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) •Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, Gasket) etc •Piping Setting( Head/Tail setting) •Pipe specification in PDMS •Pipe Routing (Linking equipments with pipes) •Modifying the Head/Tail of a Pipe •Supporting Plant with Structures (Beams, Columns, Slab) 4. PROCESS DESIGN & OPTIMIZATION (ASPEN HYSYS) COURSE MODULE: •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMNETATION DESIGN/DIAGRAM (P&ID) COURSE MODULE: • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting Equipments (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting Equipments together with Process line • Assigning Tags to Equipments and Specification to process lines • Placing control instruments to process lines, Equipments and on control valves • Checking for Errors by running validation 6. GEOPHYSICAL SURVEY FOR GROUNDWATER & GEOTECHNICAL TRAINING: For Geologists, Geophysicists, and Hydrologist: This involves data Acquisition, Processing and Interpretation using appropriate Geophysical/Geotechnical Software’s. 7: STRCUTURAL DESIGN USING STAADPRO, ORION Training venue/Head Office: Suite 59, Sebuff Plaza, Jakande Roundabout, Lekki Expressway, Lagos. Branch Office: 26, Ikotun/Idimu Rd, College Bustop, Opp Domino Pizza Ikotun, Lagos Training Schedules/Dates: 1st batch of training start, Second batch (3rd – 19th April, 2018) Second batch ( 21st April- 6th May, 2018) kengeotech@yahoo.com www.geokentech.com call ( 08060360538, 08028553955) For registration details
|
| Jobs/Vacancies / Boredrilling, Geophysical Survey, Piling Services by pipedraft: 4:31pm On Apr 05, 2018 |
Geoken Tech Services Nig Ltd Geoken Tech Services, a company incorporated under the law of Federal Republic of Nigeria with its office situated @ Suite 59, Sebuff Plaza, Jakande Roundabout, Lekki-Epe Expressway, Lagos Nigeria. SERVICES • Ground water Drilling / Exploration • Foundation, Pilling, and StructuralDesign (Piling test=PIT) • Soil and Material investigation and testing (CPT, SPT, TRIAXIAL, SIEVE ANALYSIS) • Pump and Aquifer testing Geophysical Survey, Environ mental Studies • Reservoir Characterization and Simulation • GIS Analysis • Hydro geological studies (Well Logging, Resistivity Logging & Water treatment) Engineering, Pipe & Process design (Training and Consultancy) CADD, PDMS, HYSYS, PETREL, Geotechnical Software Application. PIPELINE CONSTRUCTION This Include : Construction of both underground and above ground cargo pipelines, Construction of tank farm piping, Construction of piping pigging system, Hot tapping of pipelines, Cathodic protection of pipelines, Construction of Pipes fittings, Equipment for oil and Gas platform. GEOTECHNICAL SERVICES DIVISION: @ Geoken Engineering we stabilize engineering structures, such as private and industrial buildings, dams, jetty’s,highways, railways, road, etc. GEOPHYSICAL/GEOLOGICAL/HYDROGEOLOGY SURVEY: Using our geophysicalmethods for groundwater exploration, delineation of salt/fresh water interface, search for solid mineral deposits, using well logging. FOUNDATION/PILING WORKS: On sites, which soil are weak significant to depth, pile are structures which allow the construction of bridges, building, dams, jetty, to be design without failure and fracture. @ Geoken Engineering, we design, construct piles and carry out its testing. PIPES, STEEL, RESERVIOR, TANKS (FABRICATION/DESIGN): We use state of theearth software to design and model Plant (Equipments, Pipes), also fabricate to Customer specification. We truly provide comprehensive construction services to our clients. From planning through post construction, we are committed to the project and the team. Phone: +2348060360538, +2348028553955 Email: kengeotech@yahoo.com, info@geokentech.com Website: www.geokentech.com OPERATING OFFICE Address: Sebuff Plaza ( Suite 59), Jakande roundabout, Lekki-Epe Expressway, Lekki-Lagos. Branch: 26, Ikotun / Idimu Road, Suite 15, Kazam Plaza, College, Bus top, Ikotun, Lagos.
|
| Jobs/Vacancies / Career Opportunity For Geologists & Engineers In Lagos by pipedraft: 4:46pm On Apr 02, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSE TARGET AUDIENCE 1 AUTOCAD (2D/3D) Mechanical, Electrical, Material& Metallurgical Engineers/Trainee 2 PIPING DESIGN (PDMS) Mechanical, Chemical, Process Engineers/Trainee 3 PROCESS DESIGN & OPTIMIZATION(HYSYS) Process, Chemical Engineers/Trainee 4 RESERVOIR MODELING & WELL LOGGING(PETREL) Geologist, Reservoir Engineers, Geophysicist, Well Engineers Well site Geologist /Graduate trainee 5 PIPING &INSTRUMENTATION DESIGN (P&ID) Mechanical, Process, Electrical/Instrumentation Engineers/Graduate trainee 6 GEOPHYSICAL/GEOTECHNICAL SURVEY TRAINING Geologist, Geophysicist,Hydrogeologist, Civil/water engineer COURSE MODULE( AUTOCAD 2D/3D) Title: Engineering Design, Drafting & Modeling Overview: the course is design for student to have in depth knowledge to Engineering design and Procurement • Introduction to AutoCAD 2d Toolbar • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PETREL (SEISMIC & WELL LOGGING INTERPRETATION) COURSE MODULE •Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps •Identification of prospects. 3. PIPING DESIGN & DRAFTING (PDMS) COURSE MODULE: •Introduction to Plant Equipments type •Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, Fractionating columns. •Taking coordinate/Equipments position from plant plan drawing (GAD) •Using the Primitive method to design Equipments •Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) •Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, Gasket) etc •Piping Setting( Head/Tail setting) •Pipe specification in PDMS •Pipe Routing (Linking equipments with pipes) •Modifying the Head/Tail of a Pipe •Supporting Plant with Structures (Beams, Columns, Slab) 4. PROCESS DESIGN & OPTIMIZATION (ASPEN HYSYS) COURSE MODULE: •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMNETATION DESIGN/DIAGRAM (P&ID) COURSE MODULE: • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting Equipments (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting Equipments together with Process line • Assigning Tags to Equipments and Specification to process lines • Placing control instruments to process lines, Equipments and on control valves • Checking for Errors by running validation 6. GEOPHYSICAL SURVEY FOR GROUNDWATER & GEOTECHNICAL TRAINING: For Geologists, Geophysicists, and Hydrologist: This involves data Acquisition, Processing and Interpretation using appropriate Geophysical/Geotechnical Software’s. 7: STRCUTURAL DESIGN USING STAADPRO, ORION Training venue/Head Office: Suite 59, Sebuff Plaza, Jakande Roundabout, Lekki Expressway, Lagos. Branch Office: 26, Ikotun/Idimu Rd, College Bustop, Opp Domino Pizza Ikotun, Lagos Training Schedules/Dates: 1st batch of training start, Second batch (3rd – 19th April, 2018) Second batch ( 21st April- 6th May, 2018) kengeotech@yahoo.com www.geokentech.com call ( 08060360538, 08028553955) For registration details |
| Certification And Training Adverts / Opportunities For Geologist, Engineers, Nysc Members ( April Batch) by pipedraft: 3:07pm On Mar 30, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSE TARGET AUDIENCE 1 AUTOCAD (2D/3D) Mechanical, Electrical, Material& Metallurgical Engineers/Trainee 2 PIPING DESIGN (PDMS) Mechanical, Chemical, Process Engineers/Trainee 3 PROCESS DESIGN & OPTIMIZATION(HYSYS) Process, Chemical Engineers/Trainee 4 RESERVOIR MODELING & WELL LOGGING(PETREL) Geologist, Reservoir Engineers, Geophysicist, Well Engineers Well site Geologist /Graduate trainee 5 PIPING &INSTRUMENTATION DESIGN (P&ID) Mechanical, Process, Electrical/Instrumentation Engineers/Graduate trainee 6 GEOPHYSICAL/GEOTECHNICAL SURVEY TRAINING Geologist, Geophysicist,Hydrogeologist, Civil/water engineer COURSE MODULE( AUTOCAD 2D/3D) Title: Engineering Design, Drafting & Modeling Overview: the course is design for student to have in depth knowledge to Engineering design and Procurement • Introduction to AutoCAD 2d Toolbar • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PETREL (SEISMIC & WELL LOGGING INTERPRETATION) COURSE MODULE •Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps •Identification of prospects. 3. PIPING DESIGN & DRAFTING (PDMS) COURSE MODULE: •Introduction to Plant Equipments type •Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, Fractionating columns. •Taking coordinate/Equipments position from plant plan drawing (GAD) •Using the Primitive method to design Equipments •Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) •Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, Gasket) etc •Piping Setting( Head/Tail setting) •Pipe specification in PDMS •Pipe Routing (Linking equipments with pipes) •Modifying the Head/Tail of a Pipe •Supporting Plant with Structures (Beams, Columns, Slab) 4. PROCESS DESIGN & OPTIMIZATION (ASPEN HYSYS) COURSE MODULE: •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMNETATION DESIGN/DIAGRAM (P&ID) COURSE MODULE: • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting Equipments (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting Equipments together with Process line • Assigning Tags to Equipments and Specification to process lines • Placing control instruments to process lines, Equipments and on control valves • Checking for Errors by running validation 6. GEOPHYSICAL SURVEY FOR GROUNDWATER & GEOTECHNICAL TRAINING: For Geologists, Geophysicists, and Hydrologist: This involves data Acquisition, Processing and Interpretation using appropriate Geophysical/Geotechnical Software’s. 7: STRCUTURAL DESIGN USING STAADPRO, ORION Training venue/Head Office: Suite 59, Sebuff Plaza, Jakande Roundabout, Lekki Expressway, Lagos. Branch Office: 26, Ikotun/Idimu Rd, College Bustop, Opp Domino Pizza Ikotun, Lagos Training Schedules/Dates: 1st batch of training start, Second batch (3rd – 19th April, 2018) Second batch ( 21st April- 6th May, 2018) kengeotech@yahoo.com www.geokentech.com call ( 08060360538, 08028553955) For registration details |
| Jobs/Vacancies / Geoscience/engineering Design Software Training In Lagos by pipedraft: 2:46pm On Mar 28, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, below bare the Important software application use in the industry COURSE TARGET AUDIENCE 1 AUTOCAD (2D/3D) Mechanical, Electrical, Material& Metallurgical Engineers/Trainee 2 PIPING DESIGN (PDMS) Mechanical, Chemical, Process Engineers/Trainee 3 PROCESS DESIGN & OPTIMIZATION(HYSYS) Process, Chemical Engineers/Trainee 4 RESERVOIR MODELING & WELL LOGGING(PETREL) Geologist, Reservoir Engineers, Geophysicist, Well Engineers Well site Geologist /Graduate trainee 5 PIPING &INSTRUMENTATION DESIGN (P&ID) Mechanical, Process, Electrical/Instrumentation Engineers/Graduate trainee 6 GEOPHYSICAL/GEOTECHNICAL SURVEY TRAINING Geologist, Geophysicist,Hydrogeologist, Civil/water engineer COURSE MODULE( AUTOCAD 2D/3D) Title: Engineering Design, Drafting & Modeling Overview: the course is design for student to have in depth knowledge to Engineering design and Procurement • Introduction to AutoCAD 2d Toolbar • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PETREL (SEISMIC & WELL LOGGING INTERPRETATION) COURSE MODULE •Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps •Identification of prospects. 3. PIPING DESIGN & DRAFTING (PDMS) COURSE MODULE: •Introduction to Plant Equipments type •Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, Fractionating columns. •Taking coordinate/Equipments position from plant plan drawing (GAD) •Using the Primitive method to design Equipments •Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) •Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, Gasket) etc •Piping Setting( Head/Tail setting) •Pipe specification in PDMS •Pipe Routing (Linking equipments with pipes) •Modifying the Head/Tail of a Pipe •Supporting Plant with Structures (Beams, Columns, Slab) 4. PROCESS DESIGN & OPTIMIZATION (ASPEN HYSYS) COURSE MODULE: •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMNETATION DESIGN/DIAGRAM (P&ID) COURSE MODULE: • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting Equipments (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting Equipments together with Process line • Assigning Tags to Equipments and Specification to process lines • Placing control instruments to process lines, Equipments and on control valves • Checking for Errors by running validation 6. GEOPHYSICAL SURVEY FOR GROUNDWATER & GEOTECHNICAL TRAINING: For Geologists, Geophysicists, and Hydrologist: This involves data Acquisition, Processing and Interpretation using appropriate Geophysical/Geotechnical Software’s. 7: STRCUTURAL DESIGN USING STAADPRO, ORION Training venue/Head Office: Suite 59, Sebuff Plaza, Jakande Roundabout, Lekki Expressway, Lagos. Branch Office: 26, Ikotun/Idimu Rd, College Bustop, Opp Domino Pizza Ikotun, Lagos Training Schedules/Dates: 1st batch of training start, Second batch (3rd – 19th April, 2018) Second batch ( 21st April- 6th May, 2018) kengeotech@yahoo.com www.geokentech.com call ( 08060360538, 08028553955) For registration details
|
| Investment / Make 40% Monthly As Return Of Investment (roi) For 10 Months With Stakerrs by pipedraft: 3:55pm On Mar 14, 2018 |
Stakerrs is in partnership with Amazon fashion lines,global events, entertainment shows and sports. Stakerrs also make massive income from exhibitors,advertising and sponsorship revenues from big corporate bodies interested in selling their brands across the world. Stakerrs make massive income from mobile marketing using MTN network to advertise the events videos for subscribers to buy the videos. Stakerrs also make income from the sales of events souvenirs,tickets, videos and TV subscription. *STAKERRS RETURNS AS HIGH AS 20% EVERY TWO WEEKS* I believe that I have clarified you about what our money is being used for and how ROI is generated. *Hear This!!!* Stakerrs is not a ponzi. It is a legit Company by all proof. It has come to stay.. The question is... Are you going to take the opportunity now(best), later(good) or never(please reconsider)  You will get your Investment back in 3 months.....Because Stakerrs came with a full package. They took their time and *analyzed* all the problems and headaches limiting people from making it big in online *Investments* and *Marketing*. And they came up with solution to all... ~not less than 100% *In Stakerrs* (on Investment) Our English is simple, earn 20% every two weeks into your Nigeria bank account instantly without any hidden charges, nor referral. *In Stakerrs* (on Marketing) We invest in what is called *Portfolio*- like packages. These packages have their various prices Below is the list of *Stakerrs Investment Club* portfolios: They are: � *CLASSIC PACKAGE* � *PREMIUM PACKAGE* � *GOLD PACKAGE* �Take note �: *MULTIPLE PACKAGE IS ALLOWED IN STAKERRS* *TABLE OF INVESTMENT PACKAGES* (1)Classic package is #60,000 with Stakerrs branded t-shirt.(As Free Gift.) (1)Premium Package is 300k and it comes with Stakerrs branded t-shirt and a special ticket to attend Stakerrs event.(As Free Gift.) However, a member who chooses not to attend the event will not get the Stakerrs event ticket; rather, will be given a Tecno smartphone. Gold Package is 1m and comes with a Stakerrs T- shirt, a tecno smartphone - camon cx ,a two year recharged Glo Modem, Plus a special ticket to attend Stakerrs FEST, a platform designed to celebrate the Stars of Africa in Fashion, Entertainment, Sports and Technology. It's an elite event just like AY show. Return of investment(interest) in Stakerrs Classic 60k----- 12k every two weeks for 10months Premium 300k---#60,000 every two weeks for 10months Gold 1million ----#200,000 every two weeks for 10months *Paid directly into your local bank account*. *REFERRAL BONUSES*(OPTIONAL) (1) CLASSIC. #60K--------#3K (2) PREMIUM. #300K----#15K (3) GOLD PACKAGE. #1mil------#50km Kindly note your first 2 weeks will be used to ship your Free Gift product package to you, then the next two weeks will begin your ROI every two weeks for complete 10months.Thanks CALL: 08023671820 OR 07015431924 1 Share
|
| Jobs/Vacancies / Industrial Attachment Students Needed Lekki Office by pipedraft: 1:48pm On Mar 09, 2018 |
INDUSTRIAL ATTACHMENT STUDENTS NEEDED Geoken Tech Services Nig Ltd: is a Geophysical, Geotechnical/Engineering design & Procurement firm base in Lagos. We are in need of an Industrial attachment Students. REQUIREMENTS: 1. BSC/HND IN VIEW (GEOLOGY/GEOPHYSIC OR CIVIL ENGINEERING) 2. MUST BE RESIDING WITHIN LEKKI/AJAH AXIS 3. SHOULD HAVE A WORKING LAPTOP 4. MUST BE A ABLE TO PROMOTE THE SERVICES OF THE COMPANY N.B: This position is strictly for IT Student. INTERESTED APPLICANT SHOULD SEND CV TO: kengeotech@yahoo.com info@geokentech.com Resumption Date: As soon as Possible TEL NO: 08060360538 ADDRESS: SUITE 59, SEBUFF PLAZA, KM 15, LEKKI EPE EXPRESSWAY, JAKANDE ROUNDABOUT, OSAPA, LEKKI-LAGOS. |
| Certification And Training Adverts / Career Opportunities For Geologists, Engineers, Nysc Members In Lagos by pipedraft: 6:00pm On Feb 28, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, below bare the Important software application use in the industry COURSE TARGET AUDIENCE 1 AUTOCAD (2D/3D) Mechanical, Electrical, Material& Metallurgical Engineers/Trainee 2 PIPING DESIGN (PDMS) Mechanical, Chemical, Process Engineers/Trainee 3 PROCESS DESIGN & OPTIMIZATION(HYSYS) Process, Chemical Engineers/Trainee 4 RESERVOIR MODELING & WELL LOGGING(PETREL) Geologist, Reservoir Engineers, Geophysicist, Well Engineers Well site Geologist /Graduate trainee 5 PIPING &INSTRUMENTATION DESIGN (P&ID) Mechanical, Process, Electrical/Instrumentation Engineers/Graduate trainee 6 GEOPHYSICAL/GEOTECHNICAL SURVEY TRAINING Geologist, Geophysicist,Hydrogeologist, Civil/water engineer COURSE MODULE( AUTOCAD 2D/3D) Title: Engineering Design, Drafting & Modeling Overview: the course is design for student to have in depth knowledge to Engineering design and Procurement • Introduction to AutoCAD 2d Toolbar • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PETREL (SEISMIC & WELL LOGGING INTERPRETATION) COURSE MODULE •Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps •Identification of prospects. 3. PIPING DESIGN & DRAFTING (PDMS) COURSE MODULE: •Introduction to Plant Equipments type •Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, Fractionating columns. •Taking coordinate/Equipments position from plant plan drawing (GAD) •Using the Primitive method to design Equipments •Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) •Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, Gasket) etc •Piping Setting( Head/Tail setting) •Pipe specification in PDMS •Pipe Routing (Linking equipments with pipes) •Modifying the Head/Tail of a Pipe •Supporting Plant with Structures (Beams, Columns, Slab) 4. PROCESS DESIGN & OPTIMIZATION (ASPEN HYSYS) COURSE MODULE: •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMNETATION DESIGN/DIAGRAM (P&ID) COURSE MODULE: • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting Equipments (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting Equipments together with Process line • Assigning Tags to Equipments and Specification to process lines • Placing control instruments to process lines, Equipments and on control valves • Checking for Errors by running validation 6. GEOPHYSICAL SURVEY FOR GROUNDWATER & GEOTECHNICAL TRAINING: For Geologists, Geophysicists, and Hydrologist: This involves data Acquisition, Processing and Interpretation using appropriate Geophysical/Geotechnical Software’s. 7: STRCUTURAL DESIGN USING STAADPRO, ORION Training venue/Head Office: Suite 59, Sebuff Plaza, Jakande Roundabout, Lekki Expressway, Lagos. Branch Office: 26, Ikotun/Idimu Rd, College Bustop, Opp Domino Pizza Ikotun, Lagos Training Schedules/Dates: 1st batch of training start, 5th – 19th March, 2017, Second batch (21st March – 4th April, 2017) kengeotech@yahoo.com www.geokentech.com call ( 08060360538, 08028553955) For registration details
|
| Certification And Training Adverts / Petrel & Geophysical Survey Training 4 Geologist, Petroleum Engineers by pipedraft: 3:04pm On Feb 17, 2018 |
GEOPHYSICAL SURVEY FOR GROUND WATER EXPLORATION/ENGINEERING STUDY/ RESERVOIR SIMULATION TRAINING (PETREL) Geoken Tech Services Nig Ltd: A consulting firm into Geophysical/Geotechnical survey & Engineering design, is organizing a comprehensive training on the Application of Geophysical Survey – RESISTIVITY SELF POTENTIAL (SP) INDUCED POLARIZATION (IP) For Ground water/Environmental/Engineering studies. COURSE MODULES: • PRINCIPLE OF ELECTRICAL SURVEY • SCHLUMBEGER/WENNER/DIPOLE DIPOLE ELECTRODE CONFIGURATION • DATA PROCESSING/INTERPRETATION/ RESULT PRESENTATION (VES) • PARTIAL CURVE MATCHING TECHNIQUES • LAYERS CASE INTERPRETATION (3-4-5 LAYERS)- TWO LAYER MEDIUM THREE AND MULTIPLE LAYER MEDIUM/ INTERPRETATION (GEOELECTRIC SECTION) • 2D RESISTIVITY DATA PROCESSING/PRESENTATION & INTERPRETATION • APPLICATION OF GEOPHYSICAL SOFTWARE(WINRESIST) FOR PROCESSING ( CURVE MATCHING BY COMPUTER)& GEOELECTRIC SECTIONS • INTERPRETATION • REPORT WRITING PETREL SCHLUMBERGER (MODULES) •* PETROLEUM SYSTEMS •* INTERPRTATION & MANUAL CORRELATION OF LOGS (GAMMA, RESISTIVITY, DENSITY, NEUTRON) •* SEISMIC SECTION MANUAL INTERPRATION •* CHECK SHOT CORRELATION (OWT VS TVD) •* FAULTS, HORIZONS PICKING MANUALY ON SEISMIC SECTION •* MAP CREATION • * DATA IMPORTATION (SEISMIC, WELL DATAS (WELL HEADS, LOGS) INTO • PETREL •* PERFORMING QA/QC ON AVAILABLE DATAS BEFORE INTERPRETATION •* WELL LOG CORRELATION WITH PETREL: ASSIGN WELL TOPS, PICKING • HORIZON * LOADING OF SEISMIC DATA INTO PETREL (SEG Y DATAS) •* PERFORMING SYNTHETIC SEISMOGRAM (SEISMIC-WELL TIE) •* FAULT & HORIZON MAPPING * GENERATING SURFACE MAP/ATTRIBUTE MAPS •* PROSPECT IDENTIFICATION • * VOLUMETRIC ANALYSIS WHO SHOULD ATTEND: GEOLOGIST, GEOPHYSICISIST, WATER/ENVIRONMENTAL ENGINEERS, HYDROGEOLOGIST, IT STUDENTS, UNDERGRADUATES, NYSC MEMBERS/JOBSEEKERS CALL: GEOKEN TECH (08060360538, 08028553955) FOR REGISTRATION/TRAINING ENQUIRY Training Date: 2ND Week in February, 2018 Head Office: Sebuff Plaza, Suit 59. Lekki -Expressway (Jakanderounabout) By Shoprite Mainland Office: 26, Ikotun Road, Kazam Plaza ( Suit 15) Opp Domino Pizaa kengeotech@yahoo.com www.geokentech.com Training Starting date: Date to be announce soon, registration is in progress |
| Jobs/Vacancies / Opportunity For Geologist, Petroleum Engineers In Lagos by pipedraft: 3:39pm On Feb 14, 2018 |
SEISMIC & WELL LOG INTERPRETATION (PETREL) TRAINING COURSE MODULE office: SebuffPlaza,Suit 59, Lekki Expressway, Osapa London, Jakande Roundabout Mainland Office: 26, Ikotun Road, College Bstop/opp Domino Pizza, Suite 15, Kazam Plaza, Ikotun-Lagos. www.geokentech.com CALL: GEOKENTECH: (08060360538/08028553955) kengeotech@yahoo.com •* UNDERSTANDING OF GEOLOGY OF NIGER DELTA •* PETROLEUM SYSTEMS •* INTERPRTATION & MANUAL CORRELATION OF LOGS (GAMMA, RESISTIVITY, DENSITY, NEUTRON) •* SEISMIC SECTION MANUAL INTERPRATION •* CHECK SHOT CORRELATION (OWT VS TVD) •* FAULTS, HORIZONS PICKING MANUALY ON SEISMIC SECTION •* MAP CREATION • * DATA IMPORTATION (SEISMIC, WELL DATAS (WELL HEADS, LOGS) INTO • PETREL •* WELL LOG CORRELATION WITH PETREL: ASSIGN WELL TOPS, PICKING • HORIZON * LOADING OF SEISMIC DATA INTO PETREL (SEG Y DATAS) •* PERFORMING SYNTHETIC SEISMOGRAM (SEISMIC-WELL TIE) •* FAULT & HORIZON MAPPING * GENERATING SURFACE MAP/ATTRIBUTE MAPS •* PROSPECT IDENTIFICATION • * VOLUMETRIC ANALYSIS TARGET AUDIENCE: GEOLOGIST/GEOPHYSICIST, PET ENGINEERS/RESERVOIR ENGINEERS, WELL ENGINEERS, JOBSEEKERS, NYSC MEMBERS • • Head Office: Sebuff Plaza, Suite 59. LekkiExpressway(Jakanderoundabout) By Shoprite Mainland Office: 26, Ikotun Road, Kazam Plaza ( Suit 15) Opp Domino Pizaa kengeotech@yahoo.com www.geokentech.com |
| Career / Softwares Courses For Engineers,geologist,geophysicists by pipedraft: 11:50am On Feb 10, 2018 |
Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s. Below are the Important software application use in the industry. COURSE TARGET AUDIENCE 1 AUTOCAD (2D/3D) Mechanical, Electrical, Material & Metallurgical Engineers/Trainee 2 PIPING DESIGN (PDMS) Mechanical, Chemical, Process Engineers/Trainee 3 PROCESS DESIGN & OPTIMIZATION(HYSYS) Process, Chemical Engineers/Trainee 4 RESERVOIR MODELING & WELL LOGGING(PETREL) Geologist, Reservoir Engineers, Geophysicist, Well Engineers Well site Geologist /Graduate trainee 5 PIPING &INSTRUMENTATION DESIGN (P&ID) Mechanical, Process, Electrical/Instrumentation Engineers/Graduate trainee 6 GEOPHYSICAL/GEOTECHNICAL SURVEY TRAINING Geologist, Geophysiscist,Hydrogeologist, Civil/water engineer COURSE MODULES ( AUTOCAD 2D/3D) Title: Engineering Design, Drafting & Modeling Overview: the course is design for student to have in depth knowledge to Engineering design and Procurement • Introduction to AutoCAD 2d Toolbar • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PETREL (SEISMIC & WELL LOGGING INTERPRETATION) COURSE MODULES •Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps •Identification of prospects. 3. PIPING DESIGN & DRAFTING (PDMS) COURSE MODULE: •Introduction to Plant Equipments type •Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, Fractionating columns. •Taking coordinate/Equipments position from plant plan drawing (GAD) •Using the Primitive method to design Equipments •Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) •Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, Gasket) etc •Piping Setting •Pipe specification in PDMS •Pipe Routing (Linking equipments with pipes) •Modifying the Head/Tail of a Pipe •Supporting Plant with Structures (Beams, Columns, Slab) 4. PROCESS DESIGN & OPTIMIZATION (ASPEN HYSYS) COURSE MODULE: •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMNETATION DESIGN/DIAGRAM (P&ID) COURSE MODULE: • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting Equipments (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting Equipments together with Process line • Assigning Tags to Equipments and Specification to process lines • Placing control instruments to process lines, Equipments and on control valves • Checking for Errors by running validation 6. GEOPHYSICAL SURVEY FOR GROUNDWATER & GEOTECHNICAL TRAINING: For Geologists, Geophysicists, Hydrologist Training venue/Head Office: Suite 59, Sebuff Plaza, Jakande Roundabout, Lekki Expressway, Lagos. Branch Office: 26, Ikotun/Idimu Rd, College Bustop, Opp Domino Pizza Ikotun, Lagos Training Schedules/Dates: Training hold twice in every Month, example 1st batch (4-16th of February, 2018), Second batch (18th – 28th). This continue in subsequent month Email: kengeotech@yahoo.com www.geokentech.com call ( 08060360538, 08028553955) For registration details
|
| Jobs/Vacancies / Upcoming Trainining For Geologists & Engineers by pipedraft: 4:55pm On Feb 02, 2018 |
Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s. Below are the Important software application use in the industry. COURSE TARGET AUDIENCE 1 AUTOCAD (2D/3D) Mechanical, Electrical, Material & Metallurgical Engineers/Trainee 2 PIPING DESIGN (PDMS) Mechanical, Chemical, Process Engineers/Trainee 3 PROCESS DESIGN & OPTIMIZATION(HYSYS) Process, Chemical Engineers/Trainee 4 RESERVOIR MODELING & WELL LOGGING(PETREL) Geologist, Reservoir Engineers, Geophysicist, Well Engineers Well site Geologist /Graduate trainee 5 PIPING &INSTRUMENTATION DESIGN (P&ID) Mechanical, Process, Electrical/Instrumentation Engineers/Graduate trainee 6 GEOPHYSICAL/GEOTECHNICAL SURVEY TRAINING Geologist, Geophysiscist,Hydrogeologist, Civil/water engineer COURSE MODULES ( AUTOCAD 2D/3D) Title: Engineering Design, Drafting & Modeling Overview: the course is design for student to have in depth knowledge to Engineering design and Procurement • Introduction to AutoCAD 2d Toolbar • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PETREL (SEISMIC & WELL LOGGING INTERPRETATION) COURSE MODULES •Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps •Identification of prospects. 3. PIPING DESIGN & DRAFTING (PDMS) COURSE MODULE: •Introduction to Plant Equipments type •Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, Fractionating columns. •Taking coordinate/Equipments position from plant plan drawing (GAD) •Using the Primitive method to design Equipments •Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) •Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, Gasket) etc •Piping Setting •Pipe specification in PDMS •Pipe Routing (Linking equipments with pipes) •Modifying the Head/Tail of a Pipe •Supporting Plant with Structures (Beams, Columns, Slab) 4. PROCESS DESIGN & OPTIMIZATION (ASPEN HYSYS) COURSE MODULE: •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMNETATION DESIGN/DIAGRAM (P&ID) COURSE MODULE: • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting Equipments (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting Equipments together with Process line • Assigning Tags to Equipments and Specification to process lines • Placing control instruments to process lines, Equipments and on control valves • Checking for Errors by running validation 6. GEOPHYSICAL SURVEY FOR GROUNDWATER & GEOTECHNICAL TRAINING: For Geologists, Geophysicists, Hydrologist Training venue/Head Office: Suite 59, Sebuff Plaza, Jakande Roundabout, Lekki Expressway, Lagos. Branch Office: 26, Ikotun/Idimu Rd, College Bustop, Opp Domino Pizza Ikotun, Lagos Training Schedules/Dates: 1st Batch (5th -17th Feb, 2018), 2nd Batch (19th -28th Feb, 2018). Send Names, Number, Preferred batch, Call: 08060360538, 08028553955 ( for details) Email: kengeotech@yahoo.com www.geokentech.com
|
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (of 18 pages)
(Go Up)
| Sections: politics (1) business autos (1) jobs (1) career education (1) romance computers phones travel sports fashion health religion celebs tv-movies music-radio literature webmasters programming techmarket Links: (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) Nairaland - Copyright © 2005 - 2024 Oluwaseun Osewa. All rights reserved. See How To Advertise. 112 |