Pipedraft's Posts
Nairaland Forum › Pipedraft's Profile › Pipedraft's Posts
1 2 3 4 5 6 7 8 9 10 11 12 13 (of 20 pages)
 Certification And Training Adverts › Training On Oil & Gas/engineering Design Softwares In Lagos by pipedraft(op): 3:02pm On Jul 05, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSES TARGET AUDIENCE 1. AUTOCAD (2D/3D)-Engineering design/drafting -----Mechanical, Civil, Electrical. Engineering, NYSC, Graduates trainee, Chemical engineers AUTOCAD MODULE • Introduction to AutoCAD 2d Toolbar/Understanding AutoCAD Interface • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PIPING DESIGN (PLANT DESIGN MANAGEMENT SYSTEM)PDMS------Mechanical, Process, NYSC Chemical, Civil, Industrial PDMS MODULE • Introduction to Piping design & Specification • PDMS (Plant design management system) basics Introduction to Plant equipment’s type • Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, • Fractionating columns. • Taking coordinate/Equipment position from plant plan drawing (GAD) • Using the Primitive method to design equipment’s • Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) • Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, • Gasket) etc • Piping Isometric • • Develop equipment modeling, pipe modeling, structure modeling Piping Setting • Pipe specification in PDMS • Pipe Routing (Linking equipment’s with pipes) • Modifying the Head/Tail of a Pipe • Supporting Plant with Structures (Beams, Columns, Slab) 3. PETREL (SEISMIC INTERPRETATION, WELL LOGGING & RESERVOIR ESTIMATION)- Geologist, Petroleum, Reservoir Personal, Geophysicists, Trainee, NYSC Members MODULE Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps • Volumetric •Identification of prospects. PROCESS DESIGN & OPTIMIZATION ( HYSYS)-------------------------Chemical/Process/Industrial Personal NYSC Menbers, Graduate trainee HYSYS COURSE MODULE •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMENTATION DESIGN (P&ID) --------Mechanical, Chemical Electrical Engineering Graduates trainee, NYSC Members COURSE MODULE • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting equipment’s (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting equipment’s together with Process line • Assigning Tags to equipment’s and Specification to process lines • Placing control instruments to process lines, equipment’s and on control valves • Checking for Errors by running validation 6. DRILLING & COMPLETION/PETROLEUM TECHNOLOGY: Petroleum, Industrial, Chemical Personal, Geologist, NYSC, Graduates trainee COURSE MODULE • Introduction to Petroleum Industry • Introduction to Drilling Technology • Drilling Rigs & Rig equipment’s • Drilling Practices • Borehole instability & common drilling problems • Well site Geological survey • Drilling Fluids Technology • Directional drilling • Casing Technologies 7. GEOPHYSICAL /GEOTECHNICAL SURVEY TRAINING ----- Geologist, Hydro geologist, Water, NYSC, Geophysicist graduate/trainee CONTACT: GEOKEN TECH (08060360538/08028553955), kengeotech@yahoo.com Island Office: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway Mainland: Kazam Plaza, Suite 15, Opposite Domino Pizza, College Bustop, Ikotun- Lagos. |
| Jobs/Vacancies › Oil & Gas/engineering Design Training In Lag ( Vi, Lekki, Ajah, Ikoyi) Resident by pipedraft(op): 4:49pm On Jul 04, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSES TARGET AUDIENCE 1. AUTOCAD (2D/3D)-Engineering design/drafting -----Mechanical, Civil, Electrical. Engineering, NYSC, Graduates trainee, Chemical engineers AUTOCAD MODULE • Introduction to AutoCAD 2d Toolbar/Understanding AutoCAD Interface • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PIPING DESIGN (PLANT DESIGN MANAGEMENT SYSTEM)PDMS------Mechanical, Process, NYSC Chemical, Civil, Industrial PDMS MODULE • Introduction to Piping design & Specification • PDMS (Plant design management system) basics Introduction to Plant equipment’s type • Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, • Fractionating columns. • Taking coordinate/Equipment position from plant plan drawing (GAD) • Using the Primitive method to design equipment’s • Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) • Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, • Gasket) etc • Piping Isometric • • Develop equipment modeling, pipe modeling, structure modeling Piping Setting • Pipe specification in PDMS • Pipe Routing (Linking equipment’s with pipes) • Modifying the Head/Tail of a Pipe • Supporting Plant with Structures (Beams, Columns, Slab) 3. PETREL (SEISMIC INTERPRETATION, WELL LOGGING & RESERVOIR ESTIMATION)- Geologist, Petroleum, Reservoir Personal, Geophysicists, Trainee, NYSC Members MODULE Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps • Volumetric •Identification of prospects. PROCESS DESIGN & OPTIMIZATION ( HYSYS)-------------------------Chemical/Process/Industrial Personal NYSC Menbers, Graduate trainee HYSYS COURSE MODULE •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMENTATION DESIGN (P&ID) --------Mechanical, Chemical Electrical Engineering Graduates trainee, NYSC Members COURSE MODULE • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting equipment’s (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting equipment’s together with Process line • Assigning Tags to equipment’s and Specification to process lines • Placing control instruments to process lines, equipment’s and on control valves • Checking for Errors by running validation 6. DRILLING & COMPLETION/PETROLEUM TECHNOLOGY: Petroleum, Industrial, Chemical Personal, Geologist, NYSC, Graduates trainee COURSE MODULE • Introduction to Petroleum Industry • Introduction to Drilling Technology • Drilling Rigs & Rig equipment’s • Drilling Practices • Borehole instability & common drilling problems • Well site Geological survey • Drilling Fluids Technology • Directional drilling • Casing Technologies 7. GEOPHYSICAL /GEOTECHNICAL SURVEY TRAINING ----- Geologist, Hydro geologist, Water, NYSC, Geophysicist graduate/trainee CONTACT: GEOKEN TECH (08060360538/08028553955), kengeotech@yahoo.com Island Office: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway Mainland: Kazam Plaza, Suite 15, Opposite Domino Pizza, College Bustop, Ikotun- Lagos.
|
| Jobs/Vacancies › Engineering / Piping Design Courses For Geologists,.engineers,nysc Members by pipedraft(op): 12:06pm On Jun 30, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSES TARGET AUDIENCE 1. AUTOCAD (2D/3D)-Engineering design/drafting -----Mechanical, Civil, Electrical. Engineering, NYSC, Graduates trainee, Chemical engineers AUTOCAD MODULE • Introduction to AutoCAD 2d Toolbar/Understanding AutoCAD Interface • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PIPING DESIGN (PLANT DESIGN MANAGEMENT SYSTEM)PDMS------Mechanical, Process, NYSC Chemical, Civil, Industrial PDMS MODULE • Introduction to Piping design & Specification • PDMS (Plant design management system) basics Introduction to Plant equipment’s type • Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, • Fractionating columns. • Taking coordinate/Equipment position from plant plan drawing (GAD) • Using the Primitive method to design equipment’s • Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) • Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, • Gasket) etc • Piping Isometric • • Develop equipment modeling, pipe modeling, structure modeling Piping Setting • Pipe specification in PDMS • Pipe Routing (Linking equipment’s with pipes) • Modifying the Head/Tail of a Pipe • Supporting Plant with Structures (Beams, Columns, Slab) 3. PETREL (SEISMIC INTERPRETATION, WELL LOGGING & RESERVOIR ESTIMATION)- Geologist, Petroleum, Reservoir Personal, Geophysicists, Trainee, NYSC Members MODULE Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps • Volumetric •Identification of prospects. PROCESS DESIGN & OPTIMIZATION ( HYSYS)-------------------------Chemical/Process/Industrial Personal NYSC Menbers, Graduate trainee HYSYS COURSE MODULE •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMENTATION DESIGN (P&ID) --------Mechanical, Chemical Electrical Engineering Graduates trainee, NYSC Members COURSE MODULE • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting equipment’s (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting equipment’s together with Process line • Assigning Tags to equipment’s and Specification to process lines • Placing control instruments to process lines, equipment’s and on control valves • Checking for Errors by running validation 6. DRILLING & COMPLETION/PETROLEUM TECHNOLOGY: Petroleum, Industrial, Chemical Personal, Geologist, NYSC, Graduates trainee COURSE MODULE • Introduction to Petroleum Industry • Introduction to Drilling Technology • Drilling Rigs & Rig equipment’s • Drilling Practices • Borehole instability & common drilling problems • Well site Geological survey • Drilling Fluids Technology • Directional drilling • Casing Technologies 7. GEOPHYSICAL /GEOTECHNICAL SURVEY TRAINING ----- Geologist, Hydro geologist, Water, NYSC, Geophysicist graduate/trainee CONTACT: GEOKEN TECH (08060360538/08028553955), kengeotech@yahoo.com Island Office: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway Mainland: Kazam Plaza, Suite 15, Opposite Domino Pizza, College Bustop, Ikotun- Lagos.
|
| Jobs/Vacancies › Marketers Needed @ Geoken Tech by pipedraft(op): 3:41pm On Jun 26, 2018 |
MARKETERS NEEDEED Our company Geoken Tech Services Nig Ltd: Need the service of marketers to boost the marketing aspect of the company: Geoken Tech is into : Borehole drilling, Geotechnical/Geophysical survey, Oil and gas training courses The job Description of the marketers as specify below: 1. Searching for clients to patronage our services 2. Looking for prospects to undergo our oil and gas training courses Interested person should be staying within Ajah/lekki and Its Environs Call :Geoken Tech: 08060360538 ( Or send cv and application to kengeotech@yahoo.com) Office Address: Sebuff Plaza, Suite 59, JakandeRounaboutBustop, Lekki Expressway, Lagos. |
| Career › Courses For Geologists, Engineers, Nysc Members by pipedraft(op): 5:46am On Jun 24, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSES TARGET AUDIENCE 1. AUTOCAD (2D/3D)-Engineering design/drafting -----Mechanical, Civil, Electrical. Engineering, NYSC, Graduates trainee, Chemical engineers AUTOCAD MODULE • Introduction to AutoCAD 2d Toolbar/Understanding AutoCAD Interface • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PIPING DESIGN (PLANT DESIGN MANAGEMENT SYSTEM)PDMS------Mechanical, Process, NYSC Chemical, Civil, Industrial PDMS MODULE • Introduction to Piping design & Specification • PDMS (Plant design management system) basics Introduction to Plant equipment’s type • Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, • Fractionating columns. • Taking coordinate/Equipment position from plant plan drawing (GAD) • Using the Primitive method to design equipment’s • Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) • Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, • Gasket) etc • Piping Isometric • • Develop equipment modeling, pipe modeling, structure modeling Piping Setting • Pipe specification in PDMS • Pipe Routing (Linking equipment’s with pipes) • Modifying the Head/Tail of a Pipe • Supporting Plant with Structures (Beams, Columns, Slab) 3. PETREL (SEISMIC INTERPRETATION, WELL LOGGING & RESERVOIR ESTIMATION)- Geologist, Petroleum, Reservoir Personal, Geophysicists, Trainee, NYSC Members MODULE Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps • Volumetric •Identification of prospects. PROCESS DESIGN & OPTIMIZATION ( HYSYS)-------------------------Chemical/Process/Industrial Personal NYSC Menbers, Graduate trainee HYSYS COURSE MODULE •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMENTATION DESIGN (P&ID) --------Mechanical, Chemical Electrical Engineering Graduates trainee, NYSC Members COURSE MODULE • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting equipment’s (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting equipment’s together with Process line • Assigning Tags to equipment’s and Specification to process lines • Placing control instruments to process lines, equipment’s and on control valves • Checking for Errors by running validation 6. DRILLING & COMPLETION/PETROLEUM TECHNOLOGY: Petroleum, Industrial, Chemical Personal, Geologist, NYSC, Graduates trainee COURSE MODULE • Introduction to Petroleum Industry • Introduction to Drilling Technology • Drilling Rigs & Rig equipment’s • Drilling Practices • Borehole instability & common drilling problems • Well site Geological survey • Drilling Fluids Technology • Directional drilling • Casing Technologies 7. GEOPHYSICAL /GEOTECHNICAL SURVEY TRAINING ----- Geologist, Hydro geologist, Water, NYSC, Geophysicist graduate/trainee CONTACT: GEOKEN TECH (08060360538/08028553955), kengeotech@yahoo.com Island Office: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway Mainland: Kazam Plaza, Suite 15, Opposite Domino Pizza, College Bustop, Ikotun- Lagos.
|
| Jobs/Vacancies › Drilling , Comlpletion, Reservoir Simulation Training 4 Geologist, Engineers by pipedraft(op): 10:34am On Jun 20, 2018 |
EXPLORATION, DRILLING & PRODUCTION COURSES/TRAINING GeokenTech: offer courses in the area of drilling, completion, Exploration and Reservoir Simulation/Engineering. Our expertise covers all sections of the oil & gas Industry, Exploration and Production, Safety, Reservoir simulation. COURSE 1: DRILLING, COMPLETION & PRODUCTION TECHNOLOGY MODULES (WELL DESIGN) Week 1 • Introduction to Petroleum Industry • Introduction to Drilling Technology • Drilling Rigs &Rig Equipment’s • Drilling Engineering, Geology & Reservoir • Drilling bits classification & Technologies • Drilling Practices & operation • Drilling Problems, practices & Operations • Casing Design Week 2 DRILLING FLUID TECHNOLOGY, WELL COMPLETION & PRODUCTION • Drilling Fluids & Well control • Drilling Fluids & Cement Technologies, Practices • Well completion Engineering • Well testing, Drill stem test • Wire line logging Target Audience: Petroleum, Chemical, Mechanical Engineering personal, Geologists, Young engineers involved in drilling and completion, tool pusher, Supervisor, NYSC Members. Course Fee: #50,000.00 COURSE 2: RESERVOIR ENGINEERING & PETROPHYSICS Week 1 • Introduction to Reservoir Engineering • Reservoir characterization from seismic to production & Logging Interpretation • Reservoir management • Reservoir fluids properties • Reservoir for Petroleum Engineers/Geologists Week 2 • Basic Geophysics • Seismic acquisition and data processing • 2D/3D Seismic Interpretation • Introduction to Petrel ( Basics) • Fundamentals of Petro physics • Rock Mechanics • Wire line log Interpretation • Wire line formation testing and Interpretation Target Audience: Petroleum Engineers, graduates, Geologists, Geophysicists Personal, Exploration trainee, NYSC Members, Applicants willing to work in oil & gas/Exploration firms. Trainee Fee: # 50,000.00 For more inquiry call: Geoken Tech (08060360538, 08028553955) Email: kengeotech@yahoo.com Office: Suite 59, Sebuff Plaza, Jakande roundabout Bustop, Lekki Expressway, Lagos. Mainland office: suit 15, kazam plaza, Ikotun. |
| Jobs/Vacancies › Drilling, Completion,production & Reservoir Engineering Training by pipedraft(op): 4:01pm On Jun 18, 2018 |
EXPLORATION, DRILLING & PRODUCTION COURSES/TRAINING GeokenTech: offer courses in the area of drilling, completion, Exploration and Reservoir Simulation/Engineering. Our expertise covers all sections of the oil & gas Industry, Exploration and Production, Safety, Reservoir simulation. COURSE 1: DRILLING, COMPLETION & PRODUCTION TECHNOLOGY MODULES (WELL DESIGN) Week 1 • Introduction to Petroleum Industry • Introduction to Drilling Technology • Drilling Rigs &Rig Equipment’s • Drilling Engineering, Geology & Reservoir • Drilling bits classification & Technologies • Drilling Practices & operation • Drilling Problems, practices & Operations • Casing Design Week 2 DRILLING FLUID TECHNOLOGY, WELL COMPLETION & PRODUCTION • Drilling Fluids & Well control • Drilling Fluids & Cement Technologies, Practices • Well completion Engineering • Well testing, Drill stem test • Wire line logging Target Audience: Petroleum, Chemical, Mechanical Engineering personal, Geologists, Young engineers involved in drilling and completion, tool pusher, Supervisor, NYSC Members. Course Fee: #50,000.00 COURSE 2: RESERVOIR ENGINEERING & PETROPHYSICS Week 1 • Introduction to Reservoir Engineering • Reservoir characterization from seismic to production & Logging Interpretation • Reservoir management • Reservoir fluids properties • Reservoir for Petroleum Engineers/Geologists Week 2 • Basic Geophysics • Seismic acquisition and data processing • 2D/3D Seismic Interpretation • Introduction to Petrel ( Basics) • Fundamentals of Petro physics • Rock Mechanics • Wire line log Interpretation • Wire line formation testing and Interpretation Target Audience: Petroleum Engineers, graduates, Geologists, Geophysicists Personal, Exploration trainee, NYSC Members, Applicants willing to work in oil & gas/Exploration firms. Trainee Fee: # 50,000.00 For more inquiry call: Geoken Tech (08060360538, 08028553955) Email: kengeotech@yahoo.com Office: Suite 59, Sebuff Plaza, Jakande roundabout Bustop, Lekki Expressway, Lagos. Mainland office: suit 15, kazam plaza, Ikotun. |
| Jobs/Vacancies › Training For Geologists, Piping, Process & Drilling Engineering Personal, Nysc by pipedraft(op): 10:33pm On Jun 17, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSES TARGET AUDIENCE 1. AUTOCAD (2D/3D)-Engineering design/drafting -----Mechanical, Civil, Electrical. Engineering, NYSC, Graduates trainee, Chemical engineers AUTOCAD MODULE • Introduction to AutoCAD 2d Toolbar/Understanding AutoCAD Interface • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PIPING DESIGN (PLANT DESIGN MANAGEMENT SYSTEM)PDMS------Mechanical, Process, NYSC Chemical, Civil, Industrial PDMS MODULE • Introduction to Piping design & Specification • PDMS (Plant design management system) basics Introduction to Plant equipment’s type • Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, • Fractionating columns. • Taking coordinate/Equipment position from plant plan drawing (GAD) • Using the Primitive method to design equipment’s • Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) • Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, • Gasket) etc • Piping Isometric • • Develop equipment modeling, pipe modeling, structure modeling Piping Setting • Pipe specification in PDMS • Pipe Routing (Linking equipment’s with pipes) • Modifying the Head/Tail of a Pipe • Supporting Plant with Structures (Beams, Columns, Slab) 3. PETREL (SEISMIC INTERPRETATION, WELL LOGGING & RESERVOIR ESTIMATION)- Geologist, Petroleum, Reservoir Personal, Geophysicists, Trainee, NYSC Members MODULE Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps • Volumetric •Identification of prospects. PROCESS DESIGN & OPTIMIZATION ( HYSYS)-------------------------Chemical/Process/Industrial Personal NYSC Menbers, Graduate trainee HYSYS COURSE MODULE •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMENTATION DESIGN (P&ID) --------Mechanical, Chemical Electrical Engineering Graduates trainee, NYSC Members COURSE MODULE • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting equipment’s (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting equipment’s together with Process line • Assigning Tags to equipment’s and Specification to process lines • Placing control instruments to process lines, equipment’s and on control valves • Checking for Errors by running validation 6. DRILLING & COMPLETION/PETROLEUM TECHNOLOGY: Petroleum, Industrial, Chemical Personal, Geologist, NYSC, Graduates trainee COURSE MODULE • Introduction to Petroleum Industry • Introduction to Drilling Technology • Drilling Rigs & Rig equipment’s • Drilling Practices • Borehole instability & common drilling problems • Well site Geological survey • Drilling Fluids Technology • Directional drilling • Casing Technologies 7. GEOPHYSICAL /GEOTECHNICAL SURVEY TRAINING ----- Geologist, Hydro geologist, Water, NYSC, Geophysicist graduate/trainee CONTACT: GEOKEN TECH (08060360538/08028553955), kengeotech@yahoo.com Island Office: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway Mainland: Kazam Plaza, Suite 15, Opposite Domino Pizza, College Bustop, Ikotun- Lagos. |
| Jobs/Vacancies › Trainining Programme For Geologist, Engineers, Nysc Members In Lagos by pipedraft(op): 9:17am On Jun 16, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSES TARGET AUDIENCE 1. AUTOCAD (2D/3D)-Engineering design/drafting -----Mechanical, Civil, Electrical. Engineering, NYSC, Graduates trainee, Chemical engineers AUTOCAD MODULE • Introduction to AutoCAD 2d Toolbar/Understanding AutoCAD Interface • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PIPING DESIGN (PLANT DESIGN MANAGEMENT SYSTEM)PDMS------Mechanical, Process, NYSC Chemical, Civil, Industrial PDMS MODULE • Introduction to Piping design & Specification • PDMS (Plant design management system) basics Introduction to Plant equipment’s type • Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, • Fractionating columns. • Taking coordinate/Equipment position from plant plan drawing (GAD) • Using the Primitive method to design equipment’s • Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) • Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, • Gasket) etc • Piping Isometric • • Develop equipment modeling, pipe modeling, structure modeling Piping Setting • Pipe specification in PDMS • Pipe Routing (Linking equipment’s with pipes) • Modifying the Head/Tail of a Pipe • Supporting Plant with Structures (Beams, Columns, Slab) 3. PETREL (SEISMIC INTERPRETATION, WELL LOGGING & RESERVOIR ESTIMATION)- Geologist, Petroleum, Reservoir Personal, Geophysicists, Trainee, NYSC Members MODULE Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps • Volumetric •Identification of prospects. PROCESS DESIGN & OPTIMIZATION ( HYSYS)-------------------------Chemical/Process/Industrial Personal NYSC Menbers, Graduate trainee HYSYS COURSE MODULE •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMENTATION DESIGN (P&ID) --------Mechanical, Chemical Electrical Engineering Graduates trainee, NYSC Members COURSE MODULE • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting equipment’s (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting equipment’s together with Process line • Assigning Tags to equipment’s and Specification to process lines • Placing control instruments to process lines, equipment’s and on control valves • Checking for Errors by running validation 6. DRILLING & COMPLETION/PETROLEUM TECHNOLOGY: Petroleum, Industrial, Chemical Personal, Geologist, NYSC, Graduates trainee COURSE MODULE • Introduction to Petroleum Industry • Introduction to Drilling Technology • Drilling Rigs & Rig equipment’s • Drilling Practices • Borehole instability & common drilling problems • Well site Geological survey • Drilling Fluids Technology • Directional drilling • Casing Technologies 7. GEOPHYSICAL /GEOTECHNICAL SURVEY TRAINING ----- Geologist, Hydro geologist, Water, NYSC, Geophysicist graduate/trainee CONTACT: GEOKEN TECH (08060360538/08028553955), kengeotech@yahoo.com Island Office: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway Mainland: Kazam Plaza, Suite 15, Opposite Domino Pizza, College Bustop, Ikotun- Lagos. |
| Jobs/Vacancies › Engineering Design, Piping & Seismic/well Logging Interpretation Training by pipedraft(op): 1:17pm On Jun 14, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSES TARGET AUDIENCE 1. AUTOCAD (2D/3D)-Engineering design/drafting -----Mechanical, Civil, Electrical. Engineering, NYSC, Graduates trainee, Chemical engineers AUTOCAD MODULE • Introduction to AutoCAD 2d Toolbar/Understanding AutoCAD Interface • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PIPING DESIGN (PLANT DESIGN MANAGEMENT SYSTEM)PDMS------Mechanical, Process, NYSC Chemical, Civil, Industrial PDMS MODULE • Introduction to Piping design & Specification • PDMS (Plant design management system) basics Introduction to Plant equipment’s type • Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, • Fractionating columns. • Taking coordinate/Equipment position from plant plan drawing (GAD) • Using the Primitive method to design equipment’s • Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) • Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, • Gasket) etc • Piping Isometric • • Develop equipment modeling, pipe modeling, structure modeling Piping Setting • Pipe specification in PDMS • Pipe Routing (Linking equipment’s with pipes) • Modifying the Head/Tail of a Pipe • Supporting Plant with Structures (Beams, Columns, Slab) 3. PETREL (SEISMIC INTERPRETATION, WELL LOGGING & RESERVOIR ESTIMATION)- Geologist, Petroleum, Reservoir Personal, Geophysicists, Trainee, NYSC Members MODULE Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps • Volumetric •Identification of prospects. PROCESS DESIGN & OPTIMIZATION ( HYSYS)-------------------------Chemical/Process/Industrial Personal NYSC Menbers, Graduate trainee HYSYS COURSE MODULE •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMENTATION DESIGN (P&ID) --------Mechanical, Chemical Electrical Engineering Graduates trainee, NYSC Members COURSE MODULE • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting equipment’s (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting equipment’s together with Process line • Assigning Tags to equipment’s and Specification to process lines • Placing control instruments to process lines, equipment’s and on control valves • Checking for Errors by running validation 6. DRILLING & COMPLETION/PETROLEUM TECHNOLOGY: Petroleum, Industrial, Chemical Personal, Geologist, NYSC, Graduates trainee COURSE MODULE • Introduction to Petroleum Industry • Introduction to Drilling Technology • Drilling Rigs & Rig equipment’s • Drilling Practices • Borehole instability & common drilling problems • Well site Geological survey • Drilling Fluids Technology • Directional drilling • Casing Technologies 7. GEOPHYSICAL /GEOTECHNICAL SURVEY TRAINING ----- Geologist, Hydro geologist, Water, NYSC, Geophysicist graduate/trainee CONTACT: GEOKEN TECH (08060360538/08028553955), kengeotech@yahoo.com Island Office: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway Mainland: Kazam Plaza, Suite 15, Opposite Domino Pizza, College Bustop, Ikotun- Lagos. |
| Jobs/Vacancies › Training On Engineering, Piping & Petrel Courses In Lagos by pipedraft(op): 4:35pm On Jun 11, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSES TARGET AUDIENCE 1. AUTOCAD (2D/3D)-Engineering design/drafting -----Mechanical, Civil, Electrical. Engineering, NYSC, Graduates trainee, Chemical engineers AUTOCAD MODULE • Introduction to AutoCAD 2d Toolbar/Understanding AutoCAD Interface • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PIPING DESIGN (PLANT DESIGN MANAGEMENT SYSTEM)PDMS------Mechanical, Process, NYSC Chemical, Civil, Industrial PDMS MODULE • Introduction to Piping design & Specification • PDMS (Plant design management system) basics Introduction to Plant equipment’s type • Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, • Fractionating columns. • Taking coordinate/Equipment position from plant plan drawing (GAD) • Using the Primitive method to design equipment’s • Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) • Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, • Gasket) etc • Piping Isometric • • Develop equipment modeling, pipe modeling, structure modeling Piping Setting • Pipe specification in PDMS • Pipe Routing (Linking equipment’s with pipes) • Modifying the Head/Tail of a Pipe • Supporting Plant with Structures (Beams, Columns, Slab) 3. PETREL (SEISMIC INTERPRETATION, WELL LOGGING & RESERVOIR ESTIMATION)- Geologist, Petroleum, Reservoir Personal, Geophysicists, Trainee, NYSC Members MODULE Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps • Volumetric •Identification of prospects. PROCESS DESIGN & OPTIMIZATION ( HYSYS)-------------------------Chemical/Process/Industrial Personal NYSC Menbers, Graduate trainee HYSYS COURSE MODULE •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMENTATION DESIGN (P&ID) --------Mechanical, Chemical Electrical Engineering Graduates trainee, NYSC Members COURSE MODULE • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting equipment’s (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting equipment’s together with Process line • Assigning Tags to equipment’s and Specification to process lines • Placing control instruments to process lines, equipment’s and on control valves • Checking for Errors by running validation 6. DRILLING & COMPLETION/PETROLEUM TECHNOLOGY: Petroleum, Industrial, Chemical Personal, Geologist, NYSC, Graduates trainee COURSE MODULE • Introduction to Petroleum Industry • Introduction to Drilling Technology • Drilling Rigs & Rig equipment’s • Drilling Practices • Borehole instability & common drilling problems • Well site Geological survey • Drilling Fluids Technology • Directional drilling • Casing Technologies 7. GEOPHYSICAL /GEOTECHNICAL SURVEY TRAINING ----- Geologist, Hydro geologist, Water, NYSC, Geophysicist graduate/trainee CONTACT: GEOKEN TECH (08060360538/08028553955), kengeotech@yahoo.com Island Office: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway Mainland: Kazam Plaza, Suite 15, Opposite Domino Pizza, College Bustop, Ikotun- Lagos.
|
| Jobs/Vacancies › Training On Cad, Pdms, Petrel, Hysys, Geophysical Survey In Lagos by pipedraft(op): 4:00pm On Jun 07, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSES TARGET AUDIENCE 1. AUTOCAD (2D/3D)-Engineering design/drafting -----Mechanical, Civil, Electrical. Engineering, NYSC, Graduates trainee, Chemical engineers AUTOCAD MODULE • Introduction to AutoCAD 2d Toolbar/Understanding AutoCAD Interface • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PIPING DESIGN (PLANT DESIGN MANAGEMENT SYSTEM)PDMS------Mechanical, Process, NYSC Chemical, Civil, Industrial PDMS MODULE • Introduction to Piping design & Specification • PDMS (Plant design management system) basics Introduction to Plant equipment’s type • Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, • Fractionating columns. • Taking coordinate/Equipment position from plant plan drawing (GAD) • Using the Primitive method to design equipment’s • Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) • Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, • Gasket) etc • Piping Isometric • • Develop equipment modeling, pipe modeling, structure modeling Piping Setting • Pipe specification in PDMS • Pipe Routing (Linking equipment’s with pipes) • Modifying the Head/Tail of a Pipe • Supporting Plant with Structures (Beams, Columns, Slab) 3. PETREL (SEISMIC INTERPRETATION, WELL LOGGING & RESERVOIR ESTIMATION)- Geologist, Petroleum, Reservoir Personal, Geophysicists, Trainee, NYSC Members MODULE Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps • Volumetric •Identification of prospects. PROCESS DESIGN & OPTIMIZATION ( HYSYS)-------------------------Chemical/Process/Industrial Personal NYSC Menbers, Graduate trainee HYSYS COURSE MODULE •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMENTATION DESIGN (P&ID) --------Mechanical, Chemical Electrical Engineering Graduates trainee, NYSC Members COURSE MODULE • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting equipment’s (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting equipment’s together with Process line • Assigning Tags to equipment’s and Specification to process lines • Placing control instruments to process lines, equipment’s and on control valves • Checking for Errors by running validation 6. DRILLING & COMPLETION/PETROLEUM TECHNOLOGY: Petroleum, Industrial, Chemical Personal, Geologist, NYSC, Graduates trainee COURSE MODULE • Introduction to Petroleum Industry • Introduction to Drilling Technology • Drilling Rigs & Rig equipment’s • Drilling Practices • Borehole instability & common drilling problems • Well site Geological survey • Drilling Fluids Technology • Directional drilling • Casing Technologies 7. GEOPHYSICAL /GEOTECHNICAL SURVEY TRAINING ----- Geologist, Hydro geologist, Water, NYSC, Geophysicist graduate/trainee CONTACT: GEOKEN TECH (08060360538/08028553955), kengeotech@yahoo.com Island Office: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway Mainland: Kazam Plaza, Suite 15, Opposite Domino Pizza, College Bustop, Ikotun- Lagos. |
| Jobs/Vacancies › Geophysical/geotechnical Training In Lagos by pipedraft(op): 3:47pm On May 29, 2018 |
COURSE MODULE FOR GEOTECHNICAL/GEOPHYSICAL TRAINING 1. Objective of site geotechnical site investigation 2. Geotechnical Site Investigation method (Piling, coring, boring, Spt/Cpt) 2. Reconnaissance Survey 3. Preliminary Investigation 4. Detail (In-situ Investigation) 5. Application of Geotechnical site investigation methods (DCPT, SPT, MOISTURE CONTENT, SHEAR STRESS TEST, PERMEABILITY TEST). GEOPHYSICAL SURVEY TRAINING 1. Geophysical borehole survey- Resistivity (VES) ---Software application (Win RESIST, IPin2win)----Application of 1D, 2D & 3D Geophysical methods for Groundwater Exploration 2. Resistivity data Interpretation and application (Data loading, Software program interface, data preparation and organization) 3. Basic Concept of contouring and application 4. 3D Surface mapping and application 5. On field exposure. . In-situ Result analysis/Interpretation 12. Geotechnical software application. 13. PIT Testing procedures & Result interpretation. Training fee: #50,000 For each course Who should attend: Geologist/Geotechnical, Civil Engineers, Environmental Engineers, Hydro geologist, Geophysicist. Contact: Geoken Tech Services Nig Ltd kengeotech@yahoo.com 08060360538/08028553955 Head Office: Sebuff Plaza, Suit 59, jakande roundabout, By Shoprite, Lekki- Lagos Oulet: 26, Ikotun/Idimu Road, Opposite Domino Pizza Ikotun, Lagos
|
| Jobs/Vacancies › Oil & Gas/geotechnical & Geophysical Training In Lagos by pipedraft(op): 4:20pm On May 28, 2018 |
OIL & GAS/GEOTECHNICAL & GEOPHYSICAL TRAINING IN LAGOS Geoken Tech is offering training on the following oil and software application: 1. AUTOCAD (2D/3D) 2. PDMS(PLANT DESIGN MANAGEMENT SYSTEM)& P&ID 3. HYSYS(PROCESS DESIGN & OPTIMIZATION) 4. PETREL(RESERVOIR MODELING, SEISMIC & WELL LOGGING) WINRESIST, IPI2WIN SOFTWARE TRAINING 5. GEOTECHNICAL ENGINEERING : (SOIL INVESTIGATION METHODS PRIOR TO FOUNDATION ENGINEERING, CPT/SPT (PILING DESIGN, CONSTRUCTION & TESTING) ----FIELD WORK INVOLVE. Target Audience: Mechanical, Electrical, Material/Metallurgical, Civil, Chemical Engineers, Geologist, Physicist. Petroleum Engineers. Interested participant should send Names, Numbers & Course of interest to 08060360538 kengeotech@yahoo.com Requirement: 1. Personal Laptop , writing materials, Passport photograph CONTACT: (08060360538, 08028553955) Email:kengeotech@yahoo.com Training Center: Sebuff Plaza,Suite 59,Jakande Roundabout,Lekki- Lagos Outlet: 26, Ikotun Road, College Bustop, Kazam Plaza( Ikotun- Lagos) |
| Certification And Training Adverts › Piping Design Workshop 4 Professionals, Jobseekers by pipedraft(op): 5:07pm On May 23, 2018 |
WORKSHOP/SEMINAR ON PDMS APPLLICATION TO PROCESS PLANT DESIGN Geoken Tech Services Nig Ltd, a company that specializes in training and consulting on Oil and gas/Engineering Design courses. Is coming up with a Workshop on the application of PDMS (Plant Design Management System) in Process Plant design. Training Date: Saturday 26th May, 2018 Venue: Suite 59, Sebuff Plaza, Jakande Roundabout Lekki, Lagos Registration Fee: #5,000 Time: 10am-3 pm Target Audience: Mechanical, Process/Chemical, industrial Engineering, NYSS Members, Fresh graduates. Call: 08060360538, 08028553955( for details & more enquiries) kengeotech@yahoo.com N/B: Subsequent workshop come up 2nd & 4th Saturday of every Month. Benefit: Modeling of Mechanical & Process Equipment (pumps, Heat exchanger), Routing of Pipes, connecting fittings (Elbow, valves, tee) using PDMS The Software will be install to all participants Laptop
|
| Jobs/Vacancies › Workshop On Piping Design 4 Industry Professionals In Lekki( Sat, 26th May, 2018 by pipedraft(op): 1:10pm On May 22, 2018 |
WORKSHOP/SEMINAR ON PDMS APPLLICATION TO PROCESS PLANT DESIGN Geoken Tech Services Nig Ltd, a company that specializes in training and consulting on Oil and gas/Engineering Design courses. Is coming up with a Workshop on the application of PDMS (Plant Design Management System) in Process Plant design. Training Date: Saturday 26th May, 2018 Venue: Suite 59, Sebuff Plaza, Jakande Roundabout Lekki, Lagos Registration Fee: #5,000 Time: 10am-3 pm Target Audience: Mechanical, Process/Chemical, industrial Engineering, NYSS Members, Fresh graduates. Call: 08060360538, 08028553955( for details & more enquiries) kengeotech@yahoo.com N/B: Subsequent workshop come up 2nd & 4th Saturday of every Month. Benefit: Modeling of Mechanical & Process Equipment (pumps, Heat exchanger), Routing of Pipes, connecting fittings (Elbow, valves, tee) using PDMS The Software will be install to all participants Laptop
|
| Certification And Training Adverts › Re: Workshop/seminar On Pdms For Process Plant Design In Lekki by pipedraft(op): 8:55pm On May 21, 2018 |
Call 08060360538 for registration and other details. |
| Jobs/Vacancies › Training For Industry Professional, Geologists & Engineers In Lagos by pipedraft(op): 4:31pm On May 21, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSE TARGET AUDIENCE 1 AUTOCAD (2D/3D) Mechanical, Electrical, Material& Metallurgical Engineers/Trainee 2 PIPING DESIGN (PDMS) Mechanical, Chemical, Process Engineers/Trainee 3 PROCESS DESIGN & OPTIMIZATION(HYSYS) Process, Chemical Engineers/Trainee 4 RESERVOIR MODELING & WELL LOGGING(PETREL) Geologist, Reservoir Engineers, Geophysicist, Well Engineers Well site Geologist /Graduate trainee 5 PIPING &INSTRUMENTATION DESIGN (P&ID) Mechanical, Process, Electrical/Instrumentation Engineers/Graduate trainee 6 GEOPHYSICAL/GEOTECHNICAL SURVEY TRAINING Geologist, Geophysicist,Hydrogeologist, Civil/water engineer COURSE MODULE( AUTOCAD 2D/3D) Title: Engineering Design, Drafting & Modeling Overview: the course is design for student to have in depth knowledge to Engineering design and Procurement • Introduction to AutoCAD 2d Toolbar • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PETREL (SEISMIC & WELL LOGGING INTERPRETATION) COURSE MODULE •Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps •Identification of prospects. 3. PIPING DESIGN & DRAFTING (PDMS) COURSE MODULE: •Introduction to Plant Equipments type •Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, Fractionating columns. •Taking coordinate/Equipments position from plant plan drawing (GAD) •Using the Primitive method to design Equipments •Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) •Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, Gasket) etc •Piping Setting( Head/Tail setting) •Pipe specification in PDMS •Pipe Routing (Linking equipments with pipes) •Modifying the Head/Tail of a Pipe •Supporting Plant with Structures (Beams, Columns, Slab) 4. PROCESS DESIGN & OPTIMIZATION (ASPEN HYSYS) COURSE MODULE: •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMNETATION DESIGN/DIAGRAM (P&ID) COURSE MODULE: • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting Equipments (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting Equipments together with Process line • Assigning Tags to Equipments and Specification to process lines • Placing control instruments to process lines, Equipments and on control valves • Checking for Errors by running validation 6. GEOPHYSICAL SURVEY FOR GROUNDWATER & GEOTECHNICAL TRAINING: For Geologists, Geophysicists, and Hydrologist: This involves data Acquisition, Processing and Interpretation using appropriate Geophysical/Geotechnical Software’s. 7: STRCUTURAL DESIGN USING STAADPRO, ORION Training venue/Head Office: Suite 59, Sebuff Plaza, Jakande Roundabout, Lekki Expressway, Lagos. Branch Office: 26, Ikotun/Idimu Rd, College Bustop, Opp Domino Pizza Ikotun, Lagos kengeotech@yahoo.com call ( 08060360538, 08028553955) For registration details 1 Like
|
| Career › Workshop/seminar On Pdms For Process Plant Design In Lekki ( 7 Days To Gooooo) by pipedraft(op): 6:33am On May 19, 2018 |
WORKSHOP/SEMINAR ON PDMS APPLLICATION TO PROCESS PLANT DESIGN Geoken Tech Services Nig Ltd, a company that specializes in training and consulting on Oil and gas/Engineering Design courses. Is coming up with a Workshop on the application of PDMS (Plant Design Management System) in Process Plant design. Training Date: Saturday 26th May, 2018 Venue: Suite 59, Sebuff Plaza, Jakande Roundabout Lekki, Lagos Registration Fee: #5,000 Time: 10am-3 pm Target Audience: Mechanical, Process/Chemical, industrial Engineering, NYSS Members, Fresh graduates. Call: 08060360538, 08028553955( for details & more enquiries) kengeotech@yahoo.com N/B: Subsequent workshop come up 2nd & 4th Saturday of every Month. Benefit: Modeling of Mechanical & Process Equipment (pumps, Heat exchanger), Routing of Pipes, connecting fittings (Elbow, valves, tee) using PDMS The Software will be install to all participants Laptop |
| Jobs/Vacancies › Workshop On Piping Design (pdms) In Lagos ( 10 Days To Go) by pipedraft(op): 3:50pm On May 16, 2018 |
WORKSHOP/SEMINAR ON PDMS APPLLICATION TO PROCESS PLANT DESIGN Geoken Tech Services Nig Ltd, a company that specializes in training and consulting on Oil and gas/Engineering Design courses. Is coming up with a Workshop on the application of PDMS (Plant Design Management System) in Process Plant design. Training Date: Saturday 26th May, 2018 Venue: Suite 59, Sebuff Plaza, Jakande Roundabout Lekki, Lagos Registration Fee: #5,000 Time: 10am-3 pm Target Audience: Mechanical, Process/Chemical, industrial Engineering, NYSS Members, Fresh graduates. Call: 08060360538, 08028553955( for details & more enquiries) kengeotech@yahoo.com N/B: Subsequent workshop come up 2nd & 4th Saturday of every Month.
|
| Certification And Training Adverts › Workshop/seminar On Pdms For Process Plant Design In Lekki by pipedraft(op): 12:55pm On May 15, 2018 |
WORKSHOP/SEMINAR ON PDMS APPLLICATION TO PROCESS PLANT DESIGN Geoken Tech Services Nig Ltd, a company that specializes in training and consulting on Oil and gas/Engineering Design courses. Is coming up with a Workshop on the application of PDMS (Plant Design Management System) in Process Plant design. Training Date: Saturday 26th May, 2018 Venue: Suite 59, Sebuff Plaza, Jakande Roundabout Lekki, Lagos Registration Fee: #5,000 Time: 10am-4pm Target Audience: Mechanical, Process/Chemical, industrial Engineering, NYSS Members, Fresh graduates. Call: 08060360538, 08028553955( for details & more enquiries) kengeotech@yahoo.com N/B: Subsequent workshop come up 2nd & 4th Saturday of every Month.
|
| Career › Re: Workshop/seminar On Pdms For Process Plant Design In Lekki by pipedraft(op): 3:48am On May 15, 2018 |
11 days to go!!!!! Workshop on PDMS application for Plant design. Call: 08060360538, 08028553955 |
| Career › Workshop/seminar On Pdms For Process Plant Design In Lekki by pipedraft(op): 12:04am On May 15, 2018 |
WORKSHOP/SEMINAR ON PDMS APPLLICATION TO PROCESS PLANT DESIGN Geoken Tech Services Nig Ltd, a company that specializes in training and consulting on Oil and gas/Engineering Design courses. Is coming up with a Workshop on the application of PDMS (Plant Design Management System) in Process Plant design. Training Date: Saturday 26th May, 2018 Venue: Suite 59, Sebuff Plaza, Jakande Roundabout Lekki, Lagos Registration Fee: #5,000 Time: 10am-4pm Target Audience: Mechanical, Process/Chemical, industrial Engineering, NYSS Members, Fresh graduates. Call: 08060360538, 08028553955( for details & more enquiries) kengeotech@yahoo.com N/B: Subsequent workshop come up 2nd & 4th Saturday of every Month. |
| Jobs/Vacancies › Workshop/seminar On Pdms For Process Plant Design by pipedraft(op): 4:55pm On May 14, 2018 |
WORKSHOP/SEMINAR ON PDMS APPLLICATION TO PROCESS PLANT DESIGN Geoken Tech Services Nig Ltd, a company that specializes in training and consulting on Oil and gas/Engineering Design courses. Is coming up with a Workshop on the application of PDMS (Plant Design Management System) in Process Plant design. Training Date: Saturday 26th May, 2018 Venue: Suite 59, Sebuff Plaza, Jakande Roundabout Lekki, Lagos Registration Fee: #5,000 Time: 10am-4pm Target Audience: Mechanical, Process/Chemical, industrial Engineering, NYSS Members, Fresh graduates. Call: 08060360538, 08028553955( for details & more enquiries) kengeotech@yahoo.com N/B: Subsequent workshop come up 2nd & 4th Saturday of every Month.
|
| Jobs/Vacancies › Industrial Attachment Students Needed @ Geoken Tech by pipedraft(op): 5:27pm On May 10, 2018 |
INDUSTRIAL ATTACHMENT /INTENSHIP STUDENTSNEEDED Geoken Tech Services Nig Ltd: is a Geophysical, Geotechnical/Engineering design & Procurement firm base in Lagos. We are in need of an Industrial attachmentStudents. REQUIREMENTS: 1. BSC/HND IN VIEW (GEOLOGY/GEOPHYSIC OR CIVIL ENGINEERING) 2. MUST BE RESIDING WITHIN EGBEDA/IKOTUN & ITS ENVIRONS 3. SHOULD HAVE A WORKING LAPTOP 4. MUST BE A ABLE TO PROMOTE THE SERVICES OF THE COMPANY N.B: This position is strictly for IT Student. INTERESTED APPLICANT SHOULD SEND CV TO: kengeotech@yahoo.com Resumption Date: As soon as Possible TEL NO: 08060360538 OFFICE: Suite 59, Sebuff Plaza, Jakande roundabout, lekki- Lagos ADDRESS: SUIT 15, KAZAM PLAZA, COLLEGE BSTOP, OPP DOMINO PIZZA, IKOTUN- LAGOS |
| Jobs/Vacancies › Engineering Design, Piping & Seismic/well Logging Interpretation by pipedraft(op): 12:03pm On May 09, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSE TARGET AUDIENCE 1 AUTOCAD (2D/3D) Mechanical, Electrical, Material& Metallurgical Engineers/Trainee 2 PIPING DESIGN (PDMS) Mechanical, Chemical, Process Engineers/Trainee 3 PROCESS DESIGN & OPTIMIZATION(HYSYS) Process, Chemical Engineers/Trainee 4 RESERVOIR MODELING & WELL LOGGING(PETREL) Geologist, Reservoir Engineers, Geophysicist, Well Engineers Well site Geologist /Graduate trainee 5 PIPING &INSTRUMENTATION DESIGN (P&ID) Mechanical, Process, Electrical/Instrumentation Engineers/Graduate trainee 6 GEOPHYSICAL/GEOTECHNICAL SURVEY TRAINING Geologist, Geophysicist,Hydrogeologist, Civil/water engineer COURSE MODULE( AUTOCAD 2D/3D) Title: Engineering Design, Drafting & Modeling Overview: the course is design for student to have in depth knowledge to Engineering design and Procurement • Introduction to AutoCAD 2d Toolbar • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PETREL (SEISMIC & WELL LOGGING INTERPRETATION) COURSE MODULE •Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps •Identification of prospects. 3. PIPING DESIGN & DRAFTING (PDMS) COURSE MODULE: •Introduction to Plant Equipments type •Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, Fractionating columns. •Taking coordinate/Equipments position from plant plan drawing (GAD) •Using the Primitive method to design Equipments •Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) •Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, Gasket) etc •Piping Setting( Head/Tail setting) •Pipe specification in PDMS •Pipe Routing (Linking equipments with pipes) •Modifying the Head/Tail of a Pipe •Supporting Plant with Structures (Beams, Columns, Slab) 4. PROCESS DESIGN & OPTIMIZATION (ASPEN HYSYS) COURSE MODULE: •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMNETATION DESIGN/DIAGRAM (P&ID) COURSE MODULE: • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting Equipments (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting Equipments together with Process line • Assigning Tags to Equipments and Specification to process lines • Placing control instruments to process lines, Equipments and on control valves • Checking for Errors by running validation 6. GEOPHYSICAL SURVEY FOR GROUNDWATER & GEOTECHNICAL TRAINING: For Geologists, Geophysicists, and Hydrologist: This involves data Acquisition, Processing and Interpretation using appropriate Geophysical/Geotechnical Software’s. 7: STRCUTURAL DESIGN USING STAADPRO, ORION Training venue/Head Office: Suite 59, Sebuff Plaza, Jakande Roundabout, Lekki Expressway, Lagos. Branch Office: 26, Ikotun/Idimu Rd, College Bustop, Opp Domino Pizza Ikotun, Lagos kengeotech@yahoo.com call ( 08060360538, 08028553955) For registration details |
