Pipedraft's Posts
Nairaland Forum / Pipedraft's Profile / Pipedraft's Posts
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (of 18 pages)
 Jobs/Vacancies / Training On Cad, Piping, Petrel, Hysys In Lagos by pipedraft: 5:30pm On Oct 03, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSES TARGET AUDIENCE 1. AUTOCAD (2D/3D)-Engineering design/drafting -----Mechanical, Civil, Electrical. Engineering, NYSC, Graduates trainee, Chemical engineers AUTOCAD MODULE • Introduction to AutoCAD 2d Toolbar/Understanding AutoCAD Interface • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PIPING DESIGN (PLANT DESIGN MANAGEMENT SYSTEM)PDMS------Mechanical, Process, NYSC Chemical, Civil, Industrial PDMS MODULE • Introduction to Piping design & Specification • PDMS (Plant design management system) basics Introduction to Plant equipment’s type • Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, • Fractionating columns. • Taking coordinate/Equipment position from plant plan drawing (GAD) • Using the Primitive method to design equipment’s • Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) • Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, • Gasket) etc • Piping Isometric • • Develop equipment modeling, pipe modeling, structure modeling Piping Setting • Pipe specification in PDMS • Pipe Routing (Linking equipment’s with pipes) • Modifying the Head/Tail of a Pipe • Supporting Plant with Structures (Beams, Columns, Slab) 3. PETREL (SEISMIC INTERPRETATION, WELL LOGGING & RESERVOIR ESTIMATION)- Geologist, Petroleum, Reservoir Personal, Geophysicists, Trainee, NYSC Members MODULE Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps • Volumetric •Identification of prospects. PROCESS DESIGN & OPTIMIZATION ( HYSYS)-------------------------Chemical/Process/Industrial Personal NYSC Menbers, Graduate trainee HYSYS COURSE MODULE •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMENTATION DESIGN (P&ID) --------Mechanical, Chemical Electrical Engineering Graduates trainee, NYSC Members COURSE MODULE • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting equipment’s (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting equipment’s together with Process line • Assigning Tags to equipment’s and Specification to process lines • Placing control instruments to process lines, equipment’s and on control valves • Checking for Errors by running validation 6. DRILLING & COMPLETION/PETROLEUM TECHNOLOGY: Petroleum, Industrial, Chemical Personal, Geologist, NYSC, Graduates trainee COURSE MODULE • Introduction to Petroleum Industry • Introduction to Drilling Technology • Drilling Rigs & Rig equipment’s • Drilling Practices • Borehole instability & common drilling problems • Well site Geological survey • Drilling Fluids Technology • Directional drilling • Casing Technologies 7. GEOPHYSICAL /GEOTECHNICAL SURVEY TRAINING ----- Geologist, Hydro geologist, Water, NYSC, Geophysicist graduate/trainee CONTACT: GEOKEN TECH (08060360538/08028553955), kengeotech@yahoo.com Island Office: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway Mainland: Kazam Plaza, Suite 15, Opposite Domino Pizza, College Bustop, Ikotun- Lagos. 1 Share
|
| Jobs/Vacancies / Training On Oil &gas/engineering Design Software Training In Lagos by pipedraft: 3:31pm On Oct 01, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSES TARGET AUDIENCE 1. AUTOCAD (2D/3D)-Engineering design/drafting -----Mechanical, Civil, Electrical. Engineering, NYSC, Graduates trainee, Chemical engineers AUTOCAD MODULE • Introduction to AutoCAD 2d Toolbar/Understanding AutoCAD Interface • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PIPING DESIGN (PLANT DESIGN MANAGEMENT SYSTEM)PDMS------Mechanical, Process, NYSC Chemical, Civil, Industrial PDMS MODULE • Introduction to Piping design & Specification • PDMS (Plant design management system) basics Introduction to Plant equipment’s type • Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, • Fractionating columns. • Taking coordinate/Equipment position from plant plan drawing (GAD) • Using the Primitive method to design equipment’s • Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) • Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, • Gasket) etc • Piping Isometric • • Develop equipment modeling, pipe modeling, structure modeling Piping Setting • Pipe specification in PDMS • Pipe Routing (Linking equipment’s with pipes) • Modifying the Head/Tail of a Pipe • Supporting Plant with Structures (Beams, Columns, Slab) 3. PETREL (SEISMIC INTERPRETATION, WELL LOGGING & RESERVOIR ESTIMATION)- Geologist, Petroleum, Reservoir Personal, Geophysicists, Trainee, NYSC Members MODULE Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps • Volumetric •Identification of prospects. PROCESS DESIGN & OPTIMIZATION ( HYSYS)-------------------------Chemical/Process/Industrial Personal NYSC Menbers, Graduate trainee HYSYS COURSE MODULE •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMENTATION DESIGN (P&ID) --------Mechanical, Chemical Electrical Engineering Graduates trainee, NYSC Members COURSE MODULE • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting equipment’s (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting equipment’s together with Process line • Assigning Tags to equipment’s and Specification to process lines • Placing control instruments to process lines, equipment’s and on control valves • Checking for Errors by running validation 6. DRILLING & COMPLETION/PETROLEUM TECHNOLOGY: Petroleum, Industrial, Chemical Personal, Geologist, NYSC, Graduates trainee COURSE MODULE • Introduction to Petroleum Industry • Introduction to Drilling Technology • Drilling Rigs & Rig equipment’s • Drilling Practices • Borehole instability & common drilling problems • Well site Geological survey • Drilling Fluids Technology • Directional drilling • Casing Technologies 7. GEOPHYSICAL /GEOTECHNICAL SURVEY TRAINING ----- Geologist, Hydro geologist, Water, NYSC, Geophysicist graduate/trainee CONTACT: GEOKEN TECH (08060360538/08028553955), kengeotech@yahoo.com Island Office: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway Mainland: Kazam Plaza, Suite 15, Opposite Domino Pizza, College Bustop, Ikotun- Lagos.
|
| Jobs/Vacancies / Autocad Training Now Available In Abuja by pipedraft: 3:24pm On Sep 29, 2018 |
1. ENGINEERING DESIGN (AUTOCAD 2D/3D): About the course: AutoCAD is a commercial software application for 2D and 3D computer-aided design (CAD) and drafting. Auto cad is also for Mechanical Design, Engineering Design and Drafting, Civil Design, Civil Design 3D, and Civil Design Professional support data-specific objects, facilitating easy standard civil engineering calculations and representations. Target Audience: AutoCAD is used across a wide range of industries, by architects, project managers, engineers, designers, and other professionals. COURSE CONTENT • Introduction to AutoCAD • AutoCAD file management • Creating entities • Drawing setting • Object method • Modify entities • Layers and its application . Introduction to 3D AutoCAD . Application to 3D Tools in modeling complex objects . AutoCAD Rendering Training centers: Ciel Consulting, House 67, Kano Street, Area 1, Garki Abuja, After Shehu Shagari Mosque Training Start: October, 8th 2018 Call: Geoken : 08060360538/08028553955 |
| Certification And Training Adverts / Petrel ( Seismic, Well Logging ) Training In Lagos by pipedraft: 2:44pm On Sep 29, 2018 |
PETREL SCHLUMBEGER TRAINING Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps • Volumetric •Identification of prospects. •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs( Gamma, Resistivity, Neutron-density, Porosity logs) Target Audience: Geologist, Geophysicist, Petroleum/Reservoir Engineers Training Centers/Office: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway Mainalnd Center: 26, Ikotun Road, College bustop, Suite 15, Kazam Plaza. 08060360538, 08028553955 kengeotech@yahoo.com |
| Jobs/Vacancies / Training On Pdms, Hysys, Cadd, Reservoir Simulation For Lekki/ajah Resident by pipedraft: 5:25pm On Sep 28, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSES TARGET AUDIENCE 1. AUTOCAD (2D/3D)-Engineering design/drafting -----Mechanical, Civil, Electrical. Engineering, NYSC, Graduates trainee, Chemical engineers AUTOCAD MODULE • Introduction to AutoCAD 2d Toolbar/Understanding AutoCAD Interface • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PIPING DESIGN (PLANT DESIGN MANAGEMENT SYSTEM)PDMS------Mechanical, Process, NYSC Chemical, Civil, Industrial PDMS MODULE • Introduction to Piping design & Specification • PDMS (Plant design management system) basics Introduction to Plant equipment’s type • Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, • Fractionating columns. • Taking coordinate/Equipment position from plant plan drawing (GAD) • Using the Primitive method to design equipment’s • Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) • Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, • Gasket) etc • Piping Isometric • • Develop equipment modeling, pipe modeling, structure modeling Piping Setting • Pipe specification in PDMS • Pipe Routing (Linking equipment’s with pipes) • Modifying the Head/Tail of a Pipe • Supporting Plant with Structures (Beams, Columns, Slab) 3. PETREL (SEISMIC INTERPRETATION, WELL LOGGING & RESERVOIR ESTIMATION)- Geologist, Petroleum, Reservoir Personal, Geophysicists, Trainee, NYSC Members MODULE Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps • Volumetric •Identification of prospects. PROCESS DESIGN & OPTIMIZATION ( HYSYS)-------------------------Chemical/Process/Industrial Personal NYSC Menbers, Graduate trainee HYSYS COURSE MODULE •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMENTATION DESIGN (P&ID) --------Mechanical, Chemical Electrical Engineering Graduates trainee, NYSC Members COURSE MODULE • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting equipment’s (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting equipment’s together with Process line • Assigning Tags to equipment’s and Specification to process lines • Placing control instruments to process lines, equipment’s and on control valves • Checking for Errors by running validation 6. DRILLING & COMPLETION/PETROLEUM TECHNOLOGY: Petroleum, Industrial, Chemical Personal, Geologist, NYSC, Graduates trainee COURSE MODULE • Introduction to Petroleum Industry • Introduction to Drilling Technology • Drilling Rigs & Rig equipment’s • Drilling Practices • Borehole instability & common drilling problems • Well site Geological survey • Drilling Fluids Technology • Directional drilling • Casing Technologies 7. GEOPHYSICAL /GEOTECHNICAL SURVEY TRAINING ----- Geologist, Hydro geologist, Water, NYSC, Geophysicist graduate/trainee CONTACT: GEOKEN TECH (08060360538/08028553955), kengeotech@yahoo.com Island Office: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway Mainland: Kazam Plaza, Suite 15, Opposite Domino Pizza, College Bustop, Ikotun- Lagos.
|
| Career / Plant Design (pdms) Workshop In Lekki by pipedraft: 6:46pm On Sep 25, 2018 |
WORKSHOP ON PIPING & EQUIPMENT DESIGN (PDMS) Geoken is holding a workshop on the application of Piping software (PDMS) Plant engineering design. PDMS (Plant Design Management System) as it is known in the 3D CAD industry is a customizable, multi-user and multi-discipline, engineer-controlled design software package for engineering, design and construction projects in offshore and onshore. Objectives • To provide trainees with the basic knowledge of Pipes and Plant Design Management Systems • To train engineers to competently design pipes, workflow stations and 3D Plants using the PDMS Software • To provide trainees with practical knowledge of the user interface, attributes, positioning and orientation of elements • To provide a refresher course for those already involved in the oil and gas pipes and plant design operations • To model a 3D pictorial representation of equipment’s and pipe routing Who Should Attend? Mechanical/ Production engineers, Electrical, Engineers, Chemical Engineers, Materials Engineers, Construction Engineers, Oil and Gas Engineers, Civil-Structural, Fresh graduates, NYSC Members and Jobseekers. Certificate of Piping design will be issue to ALL Participants Venue: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway, Lagos. Date: Saturday, 29th September, 2018. Workshop Fee: #5,000 Contact: Geoken: 08060360538, 08028553955 kengeotech@yahoo.com Please for seat reservation send, Names & Number to 08060360538.
|
| Jobs/Vacancies / Training For Engineers, Geologists, Nysc Members & Job Seekers by pipedraft: 6:18pm On Sep 25, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSES TARGET AUDIENCE 1. AUTOCAD (2D/3D)-Engineering design/drafting -----Mechanical, Civil, Electrical. Engineering, NYSC, Graduates trainee, Chemical engineers AUTOCAD MODULE • Introduction to AutoCAD 2d Toolbar/Understanding AutoCAD Interface • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PIPING DESIGN (PLANT DESIGN MANAGEMENT SYSTEM)PDMS------Mechanical, Process, NYSC Chemical, Civil, Industrial PDMS MODULE • Introduction to Piping design & Specification • PDMS (Plant design management system) basics Introduction to Plant equipment’s type • Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, • Fractionating columns. • Taking coordinate/Equipment position from plant plan drawing (GAD) • Using the Primitive method to design equipment’s • Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) • Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, • Gasket) etc • Piping Isometric • • Develop equipment modeling, pipe modeling, structure modeling Piping Setting • Pipe specification in PDMS • Pipe Routing (Linking equipment’s with pipes) • Modifying the Head/Tail of a Pipe • Supporting Plant with Structures (Beams, Columns, Slab) 3. PETREL (SEISMIC INTERPRETATION, WELL LOGGING & RESERVOIR ESTIMATION)- Geologist, Petroleum, Reservoir Personal, Geophysicists, Trainee, NYSC Members MODULE Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps • Volumetric •Identification of prospects. PROCESS DESIGN & OPTIMIZATION ( HYSYS)-------------------------Chemical/Process/Industrial Personal NYSC Menbers, Graduate trainee HYSYS COURSE MODULE •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMENTATION DESIGN (P&ID) --------Mechanical, Chemical Electrical Engineering Graduates trainee, NYSC Members COURSE MODULE • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting equipment’s (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting equipment’s together with Process line • Assigning Tags to equipment’s and Specification to process lines • Placing control instruments to process lines, equipment’s and on control valves • Checking for Errors by running validation 6. DRILLING & COMPLETION/PETROLEUM TECHNOLOGY: Petroleum, Industrial, Chemical Personal, Geologist, NYSC, Graduates trainee COURSE MODULE • Introduction to Petroleum Industry • Introduction to Drilling Technology • Drilling Rigs & Rig equipment’s • Drilling Practices • Borehole instability & common drilling problems • Well site Geological survey • Drilling Fluids Technology • Directional drilling • Casing Technologies 7. GEOPHYSICAL /GEOTECHNICAL SURVEY TRAINING ----- Geologist, Hydro geologist, Water, NYSC, Geophysicist graduate/trainee CONTACT: GEOKEN TECH (08060360538/08028553955), kengeotech@yahoo.com Island Office: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway Mainland: Kazam Plaza, Suite 15, Opposite Domino Pizza, College Bustop, Ikotun- Lagos.
|
| Jobs/Vacancies / Pdms Training In Abuja ( Starting, October 8th, 2018) by pipedraft: 8:32am On Sep 25, 2018 |
PLANT DESIGN TRAINING (PDMS) IN ABUJA Plant Design Management System (PDMS) is an Engineering Design Software used to model a complete Facility from Foundation level to the Equipment level, Structural level, and as well as Pipe routing. PDMS (Plant Design Management System) as it is known in the 3D CAD industry is a customizable, multi-user and multi-discipline, engineer-controlled design software package for engineering, design and construction projects in offshore and onshore. Objectives • To provide trainees with the basic knowledge of Pipes and Plant Design Management Systems • To train engineers to competently design pipes, workflow stations and 3D Plants using the PDMS Software • To provide trainees with practical knowledge of the user interface, attributes, positioning and orientation of elements • To provide a refresher course for those already involved in the oil and gas pipes and plant design operations Who Should Attend Mechanical/ Production engineers, Electrical, Engineers, Chemical Engineers, Materials Engineers, Construction Engineers, Oil and Gas Engineers, Civil-Structural Engineers, Designers and Draughtsman, Project Engineers and other related disciplines. About the Training PDMS has modules for both administrative and designer users. This training is limited to the modules for Designers. However, it is a pre-0 Course Outline for PDMS Designer. Design Modules: • Requires modeling a complete 3D- representation of facilities. • Introduction to Design module. • Entering Design modules and PDMS • Switching between modules. • Design Database Hierarchy • Menu bars in PDMS design (Display, Edit, View, Selection, Utilities, create, modify, position, orientate, connect, query ) • Primitive and attributes in PDMS • Equipment modeling (HV, VV, and standard equipments) • Structural modeling (ASL, Beams and Columns, Panels and Plates, walls and floors) • Pipework modeling.(Piping fundamentals, piping and components / pipeline modeling) • Design templates. ISO Draft Modules: Used to produce isometric plot files of pipes and networks, from either the Design or Fabrication databases, to your own required standards. These drawings can be used for pipe work fabrication, as well as during on-site erection. To book for training reservation call: Geoken Tech 08060360538/08028553955 kengeotech@yahoo.com Training centers: Ciel Consulting, House 67, Kano Street, Area 1, Garki Abuja, After Shehu Shagari Mosque Training Start: Training Fee: #50,000
|
| Jobs/Vacancies / Workshop On Piping Design (pdms) Sat, 29th September, 2018 by pipedraft: 5:47pm On Sep 21, 2018 |
Geoken Tech is holding a Seminar on Piping & Equipment design ( PDMS) Who Should Attend Mechanical/ Production engineers, Electrical, Engineers, Chemical Engineers, Materials Engineers, Construction Engineers, Oil and Gas Engineers, Civil-Structural Engineers, Designers and Draughtsman, Project Engineers and other related disciplines.
|
| Jobs/Vacancies / Workshop On Piping Design (pdms) Sat, 29th September, 2018 by pipedraft: 7:17am On Sep 20, 2018 |
WORKSHOP ON PIPING & EQUIPMENT DESIGN (PDMS) Geoken is holding a workshop on the application of Piping software (PDMS) Plant engineering design. PDMS (Plant Design Management System) as it is known in the 3D CAD industry is a customizable, multi-user and multi-discipline, engineer-controlled design software package for engineering, design and construction projects in offshore and onshore. Objectives • To provide trainees with the basic knowledge of Pipes and Plant Design Management Systems • To train engineers to competently design pipes, workflow stations and 3D Plants using the PDMS Software • To provide trainees with practical knowledge of the user interface, attributes, positioning and orientation of elements • To provide a refresher course for those already involved in the oil and gas pipes and plant design operations • To model a 3D pictorial representation of equipment’s and pipe routing Who Should Attend? Mechanical/ Production engineers, Electrical, Engineers, Chemical Engineers, Materials Engineers, Construction Engineers, Oil and Gas Engineers, Civil-Structural, Fresh graduates, NYSC Members and Jobseekers. Certificate of Piping design will be issue to ALL Participants Venue: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway, Lagos. Date: Saturday, 29th September, 2018. Workshop Fee: #5,000 Contact: Geoken: 08060360538, 08028553955 kengeotech@yahoo.com Please for seat reservation send, Names & Number to 08060360538. |
| Jobs/Vacancies / Workshop On Piping Engineering Design Using Pdms by pipedraft: 5:52pm On Sep 19, 2018 |
WORKSHOP ON PIPING & EQUIPMENT DESIGN (PDMS) Geoken is holding a workshop on the application of Piping software (PDMS) Plant engineering design. PDMS (Plant Design Management System) as it is known in the 3D CAD industry is a customizable, multi-user and multi-discipline, engineer-controlled design software package for engineering, design and construction projects in offshore and onshore. Objectives • To provide trainees with the basic knowledge of Pipes and Plant Design Management Systems • To train engineers to competently design pipes, workflow stations and 3D Plants using the PDMS Software • To provide trainees with practical knowledge of the user interface, attributes, positioning and orientation of elements • To provide a refresher course for those already involved in the oil and gas pipes and plant design operations • To model a 3D pictorial representation of equipment’s and pipe routing Who Should Attend? Mechanical/ Production engineers, Electrical, Engineers, Chemical Engineers, Materials Engineers, Construction Engineers, Oil and Gas Engineers, Civil-Structural, Fresh graduates, NYSC Members and Jobseekers. Certificate of Piping design will be issue to ALL Participants Venue: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway, Lagos. Date: Saturday, 29th September, 2018. Workshop Fee: #5,000 Contact: Geoken: 08060360538, 08028553955 kengeotech@yahoo.com Please for seat reservation send, Names & Number to 08060360538. |
| Jobs/Vacancies / Piping Design Training In Lag ( Sep 24th-oct 7th 2018) by pipedraft: 9:40pm On Sep 16, 2018 |
Plant Design Management System (PDMS) is an Engineering Design Software used to model a complete Facility from Foundation level to the Equipment level, Structural level, and as well as Pipe routing. PDMS (Plant Design Management System) as it is known in the 3D CAD industry is a customizable, multi-user and multi-discipline, engineer-controlled design software package for engineering, design and construction projects in offshore and onshore. Objectives • To provide trainees with the basic knowledge of Pipes and Plant Design Management Systems • To train engineers to competently design pipes, workflow stations and 3D Plants using the PDMS Software • To provide trainees with practical knowledge of the user interface, attributes, positioning and orientation of elements • To provide a refresher course for those already involved in the oil and gas pipes and plant design operations Who Should Attend Mechanical/ Production engineers, Electrical, Engineers, Chemical Engineers, Materials Engineers, Construction Engineers, Oil and Gas Engineers, Civil-Structural Engineers, Designers and Draughtsman, Project Engineers and other related disciplines. About the Training PDMS has modules for both administrative and designer users. This training is limited to the modules for Designers. However, it is a pre-0 Course Outline for PDMS Designer. Design Modules: • Requires modeling a complete 3D- representation of facilities. • Introduction to Design module. • Entering Design modules and PDMS • Switching between modules. • Design Database Hierarchy • Menu bars in PDMS design (Display, Edit, View, Selection, Utilities, create, modify, position, orientate, connect, query ) • Primitive and attributes in PDMS • Equipment modeling (HV, VV, and standard equipments) • Structural modeling (ASL, Beams and Columns, Panels and Plates, walls and floors) • Pipework modeling.(Piping fundamentals, piping and components / pipeline modeling) • Design templates. ISO Draft Modules: Used to produce isometric plot files of pipes and networks, from either the Design or Fabrication databases, to your own required standards. These drawings can be used for pipe work fabrication, as well as during on-site erection. To book for training reservation call: Geoken Tech 08060360538/08028553955 kengeotech@yahoo.com Training centers: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway, Lagos Mainland Centre: Suite 15, Kazam Plaza, College Bustop, Ikotun-Lagos Training Start: 24th September- 7th October, 2018 Training Fee: #50,000 |
| Business To Business / Re: Introduce Your Business by pipedraft: 7:53pm On Sep 13, 2018 |
Geoken Tech Services Nig Ltd Our Services: Engineering design & Piping training and Consulting using the following softwares( AutoCAD, PDMS, PETREL). * Construction of borehole, Geophysical survey * Geotechnical investigation ( Soil testing) * Piling & Foundation design Sebuff plaza, Suite 59, Jakande roundabout, Lekki expressway. . 08060360538/08028553955 . kengeotech@yahoo.com |
| Career / Petrel Schlumbeger Training For Geologist, Petroleum Engineers In Lagos by pipedraft: 4:36pm On Sep 05, 2018 |
PETREL SCHLUMBEGER TRAINING Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps • Volumetric •Identification of prospects. •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs( Gamma, Resistivity, Neutron-density, Porosity logs) Target Audience: Geologist, Geophysicist, Petroleum/Reservoir Engineers Training Centers/Office: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway Mainalnd Center: 26, Ikotun Road, College bustop, Suite 15, Kazam Plaza. 08060360538, 08028553955 kengeotech@yahoo.com |
| Jobs/Vacancies / Training On Autocad, Piping, Hysys & Petrel In Lagos by pipedraft: 6:25pm On Aug 29, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSES TARGET AUDIENCE 1. AUTOCAD (2D/3D)-Engineering design/drafting -----Mechanical, Civil, Electrical. Engineering, NYSC, Graduates trainee, Chemical engineers AUTOCAD MODULE • Introduction to AutoCAD 2d Toolbar/Understanding AutoCAD Interface • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PIPING DESIGN (PLANT DESIGN MANAGEMENT SYSTEM)PDMS------Mechanical, Process, NYSC Chemical, Civil, Industrial PDMS MODULE • Introduction to Piping design & Specification • PDMS (Plant design management system) basics Introduction to Plant equipment’s type • Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, • Fractionating columns. • Taking coordinate/Equipment position from plant plan drawing (GAD) • Using the Primitive method to design equipment’s • Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) • Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, • Gasket) etc • Piping Isometric • • Develop equipment modeling, pipe modeling, structure modeling Piping Setting • Pipe specification in PDMS • Pipe Routing (Linking equipment’s with pipes) • Modifying the Head/Tail of a Pipe • Supporting Plant with Structures (Beams, Columns, Slab) 3. PETREL (SEISMIC INTERPRETATION, WELL LOGGING & RESERVOIR ESTIMATION)- Geologist, Petroleum, Reservoir Personal, Geophysicists, Trainee, NYSC Members MODULE Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps • Volumetric •Identification of prospects. PROCESS DESIGN & OPTIMIZATION ( HYSYS)-------------------------Chemical/Process/Industrial Personal NYSC Menbers, Graduate trainee HYSYS COURSE MODULE •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMENTATION DESIGN (P&ID) --------Mechanical, Chemical Electrical Engineering Graduates trainee, NYSC Members COURSE MODULE • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting equipment’s (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting equipment’s together with Process line • Assigning Tags to equipment’s and Specification to process lines • Placing control instruments to process lines, equipment’s and on control valves • Checking for Errors by running validation 6. DRILLING & COMPLETION/PETROLEUM TECHNOLOGY: Petroleum, Industrial, Chemical Personal, Geologist, NYSC, Graduates trainee COURSE MODULE • Introduction to Petroleum Industry • Introduction to Drilling Technology • Drilling Rigs & Rig equipment’s • Drilling Practices • Borehole instability & common drilling problems • Well site Geological survey • Drilling Fluids Technology • Directional drilling • Casing Technologies 7. GEOPHYSICAL /GEOTECHNICAL SURVEY TRAINING ----- Geologist, Hydro geologist, Water, NYSC, Geophysicist graduate/trainee CONTACT: GEOKEN TECH (08060360538/08028553955), kengeotech@yahoo.com Island Office: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway Mainland: Kazam Plaza, Suite 15, Opposite Domino Pizza, College Bustop, Ikotun- Lagos. |
| Autos / Re: 2001 Very Clean Toyota Camry For Sale, N750k by pipedraft: 6:50am On Aug 27, 2018 |
Is the car first body, am coming with 650k. |
| Jobs/Vacancies / Training For Geologist, Engineers & Geophysicist In Lagos by pipedraft: 2:54pm On Aug 24, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSES TARGET AUDIENCE 1. AUTOCAD (2D/3D)-Engineering design/drafting -----Mechanical, Civil, Electrical. Engineering, NYSC, Graduates trainee, Chemical engineers AUTOCAD MODULE • Introduction to AutoCAD 2d Toolbar/Understanding AutoCAD Interface • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PIPING DESIGN (PLANT DESIGN MANAGEMENT SYSTEM)PDMS------Mechanical, Process, NYSC Chemical, Civil, Industrial PDMS MODULE • Introduction to Piping design & Specification • PDMS (Plant design management system) basics Introduction to Plant equipment’s type • Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, • Fractionating columns. • Taking coordinate/Equipment position from plant plan drawing (GAD) • Using the Primitive method to design equipment’s • Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) • Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, • Gasket) etc • Piping Isometric • • Develop equipment modeling, pipe modeling, structure modeling Piping Setting • Pipe specification in PDMS • Pipe Routing (Linking equipment’s with pipes) • Modifying the Head/Tail of a Pipe • Supporting Plant with Structures (Beams, Columns, Slab) 3. PETREL (SEISMIC INTERPRETATION, WELL LOGGING & RESERVOIR ESTIMATION)- Geologist, Petroleum, Reservoir Personal, Geophysicists, Trainee, NYSC Members MODULE Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps • Volumetric •Identification of prospects. PROCESS DESIGN & OPTIMIZATION ( HYSYS)-------------------------Chemical/Process/Industrial Personal NYSC Menbers, Graduate trainee HYSYS COURSE MODULE •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMENTATION DESIGN (P&ID) --------Mechanical, Chemical Electrical Engineering Graduates trainee, NYSC Members COURSE MODULE • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting equipment’s (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting equipment’s together with Process line • Assigning Tags to equipment’s and Specification to process lines • Placing control instruments to process lines, equipment’s and on control valves • Checking for Errors by running validation 6. DRILLING & COMPLETION/PETROLEUM TECHNOLOGY: Petroleum, Industrial, Chemical Personal, Geologist, NYSC, Graduates trainee COURSE MODULE • Introduction to Petroleum Industry • Introduction to Drilling Technology • Drilling Rigs & Rig equipment’s • Drilling Practices • Borehole instability & common drilling problems • Well site Geological survey • Drilling Fluids Technology • Directional drilling • Casing Technologies 7. GEOPHYSICAL /GEOTECHNICAL SURVEY TRAINING ----- Geologist, Hydro geologist, Water, NYSC, Geophysicist graduate/trainee CONTACT: GEOKEN TECH (08060360538/08028553955), kengeotech@yahoo.com Island Office: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway Mainland: Kazam Plaza, Suite 15, Opposite Domino Pizza, College Bustop, Ikotun- Lagos.
|
| Jobs/Vacancies / Oil & Gas Courses Programme 4 Residents In Lekki, Ajah, Vi, Ibeju Lekki by pipedraft: 1:07pm On Aug 20, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSES TARGET AUDIENCE 1. AUTOCAD (2D/3D)-Engineering design/drafting -----Mechanical, Civil, Electrical. Engineering, NYSC, Graduates trainee, Chemical engineers AUTOCAD MODULE • Introduction to AutoCAD 2d Toolbar/Understanding AutoCAD Interface • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PIPING DESIGN (PLANT DESIGN MANAGEMENT SYSTEM)PDMS------Mechanical, Process, NYSC Chemical, Civil, Industrial PDMS MODULE • Introduction to Piping design & Specification • PDMS (Plant design management system) basics Introduction to Plant equipment’s type • Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, • Fractionating columns. • Taking coordinate/Equipment position from plant plan drawing (GAD) • Using the Primitive method to design equipment’s • Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) • Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, • Gasket) etc • Piping Isometric • • Develop equipment modeling, pipe modeling, structure modeling Piping Setting • Pipe specification in PDMS • Pipe Routing (Linking equipment’s with pipes) • Modifying the Head/Tail of a Pipe • Supporting Plant with Structures (Beams, Columns, Slab) 3. PETREL (SEISMIC INTERPRETATION, WELL LOGGING & RESERVOIR ESTIMATION)- Geologist, Petroleum, Reservoir Personal, Geophysicists, Trainee, NYSC Members MODULE Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps • Volumetric •Identification of prospects. PROCESS DESIGN & OPTIMIZATION ( HYSYS)-------------------------Chemical/Process/Industrial Personal NYSC Menbers, Graduate trainee HYSYS COURSE MODULE •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMENTATION DESIGN (P&ID) --------Mechanical, Chemical Electrical Engineering Graduates trainee, NYSC Members COURSE MODULE • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting equipment’s (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting equipment’s together with Process line • Assigning Tags to equipment’s and Specification to process lines • Placing control instruments to process lines, equipment’s and on control valves • Checking for Errors by running validation 6. DRILLING & COMPLETION/PETROLEUM TECHNOLOGY: Petroleum, Industrial, Chemical Personal, Geologist, NYSC, Graduates trainee COURSE MODULE • Introduction to Petroleum Industry • Introduction to Drilling Technology • Drilling Rigs & Rig equipment’s • Drilling Practices • Borehole instability & common drilling problems • Well site Geological survey • Drilling Fluids Technology • Directional drilling • Casing Technologies 7. GEOPHYSICAL /GEOTECHNICAL SURVEY TRAINING ----- Geologist, Hydro geologist, Water, NYSC, Geophysicist graduate/trainee CONTACT: GEOKEN TECH (08060360538/08028553955), kengeotech@yahoo.com Island Office: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway Mainland: Kazam Plaza, Suite 15, Opposite Domino Pizza, College Bustop, Ikotun- Lagos. |
| Jobs/Vacancies / Geophysical/geotechnical Survey Training In Lagos by pipedraft: 6:17pm On Aug 15, 2018 |
GEOTECHNICAL/GEOPHYSICAL INVESTIGATION TRAINING Geoken Tech:, is into in geotechnical study, Drilling, material and soil Investigation, Piling and Foundation Engineering. We undergo training for participant seekingin-depth knowledge in the following Geotechnical/Geophysical areas: 1. Geotechnics: (Soil Testing/investigation)- Using the following soil test procedure as a case Study. A. Sieve Analysis B. CPT (Cone penetration Test), SPT (Standard penetration test) C. Triaxial testing D. Bearing Capacity Test. E. Borehole drilling and Geophysical survey. F. Application of Geophysical & Geotechnical software for data processing 2. Foundation Engineering: A. Pile integration testing and Pile construction B. Pile load test WHO TO ATTEND: Geologist, geophysicist, Civil, Petroleum/reservoir Engineer, NYSC, and Students,Geotechnical survey Engineers, Hydrographers, Surveyors, IT students Office/Training centre: Sebuff Plaza, Suite 59, Jakande roundabout, Lekki Expressway, Lagos Contact: 26, Ikotun Road, Beside Diamond Bank, Suite, 15, Kazam Plaza, College Bustop, Ikotun, Lagos. |
| Jobs/Vacancies / Training On Engineering, Piping & Exploration Courses In Lagos by pipedraft: 6:26pm On Aug 12, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSES TARGET AUDIENCE 1. AUTOCAD (2D/3D)-Engineering design/drafting -----Mechanical, Civil, Electrical. Engineering, NYSC, Graduates trainee, Chemical engineers AUTOCAD MODULE • Introduction to AutoCAD 2d Toolbar/Understanding AutoCAD Interface • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PIPING DESIGN (PLANT DESIGN MANAGEMENT SYSTEM)PDMS------Mechanical, Process, NYSC Chemical, Civil, Industrial PDMS MODULE • Introduction to Piping design & Specification • PDMS (Plant design management system) basics Introduction to Plant equipment’s type • Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, • Fractionating columns. • Taking coordinate/Equipment position from plant plan drawing (GAD) • Using the Primitive method to design equipment’s • Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) • Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, • Gasket) etc • Piping Isometric • • Develop equipment modeling, pipe modeling, structure modeling Piping Setting • Pipe specification in PDMS • Pipe Routing (Linking equipment’s with pipes) • Modifying the Head/Tail of a Pipe • Supporting Plant with Structures (Beams, Columns, Slab) 3. PETREL (SEISMIC INTERPRETATION, WELL LOGGING & RESERVOIR ESTIMATION)- Geologist, Petroleum, Reservoir Personal, Geophysicists, Trainee, NYSC Members MODULE Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps • Volumetric •Identification of prospects. PROCESS DESIGN & OPTIMIZATION ( HYSYS)-------------------------Chemical/Process/Industrial Personal NYSC Menbers, Graduate trainee HYSYS COURSE MODULE •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMENTATION DESIGN (P&ID) --------Mechanical, Chemical Electrical Engineering Graduates trainee, NYSC Members COURSE MODULE • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting equipment’s (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting equipment’s together with Process line • Assigning Tags to equipment’s and Specification to process lines • Placing control instruments to process lines, equipment’s and on control valves • Checking for Errors by running validation 6. DRILLING & COMPLETION/PETROLEUM TECHNOLOGY: Petroleum, Industrial, Chemical Personal, Geologist, NYSC, Graduates trainee COURSE MODULE • Introduction to Petroleum Industry • Introduction to Drilling Technology • Drilling Rigs & Rig equipment’s • Drilling Practices • Borehole instability & common drilling problems • Well site Geological survey • Drilling Fluids Technology • Directional drilling • Casing Technologies 7. GEOPHYSICAL /GEOTECHNICAL SURVEY TRAINING ----- Geologist, Hydro geologist, Water, NYSC, Geophysicist graduate/trainee CONTACT: GEOKEN TECH (08060360538/08028553955), kengeotech@yahoo.com Island Office: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway Mainland: Kazam Plaza, Suite 15, Opposite Domino Pizza, College Bustop, Ikotun- Lagos. |
| Career / Training On Engineering, Piping & Exploration Courses In Lagos by pipedraft: 6:08pm On Aug 12, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSES TARGET AUDIENCE 1. AUTOCAD (2D/3D)-Engineering design/drafting -----Mechanical, Civil, Electrical. Engineering, NYSC, Graduates trainee, Chemical engineers AUTOCAD MODULE • Introduction to AutoCAD 2d Toolbar/Understanding AutoCAD Interface • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PIPING DESIGN (PLANT DESIGN MANAGEMENT SYSTEM)PDMS------Mechanical, Process, NYSC Chemical, Civil, Industrial PDMS MODULE • Introduction to Piping design & Specification • PDMS (Plant design management system) basics Introduction to Plant equipment’s type • Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, • Fractionating columns. • Taking coordinate/Equipment position from plant plan drawing (GAD) • Using the Primitive method to design equipment’s • Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) • Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, • Gasket) etc • Piping Isometric • • Develop equipment modeling, pipe modeling, structure modeling Piping Setting • Pipe specification in PDMS • Pipe Routing (Linking equipment’s with pipes) • Modifying the Head/Tail of a Pipe • Supporting Plant with Structures (Beams, Columns, Slab) 3. PETREL (SEISMIC INTERPRETATION, WELL LOGGING & RESERVOIR ESTIMATION)- Geologist, Petroleum, Reservoir Personal, Geophysicists, Trainee, NYSC Members MODULE Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps • Volumetric •Identification of prospects. PROCESS DESIGN & OPTIMIZATION ( HYSYS)-------------------------Chemical/Process/Industrial Personal NYSC Menbers, Graduate trainee HYSYS COURSE MODULE •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMENTATION DESIGN (P&ID) --------Mechanical, Chemical Electrical Engineering Graduates trainee, NYSC Members COURSE MODULE • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting equipment’s (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting equipment’s together with Process line • Assigning Tags to equipment’s and Specification to process lines • Placing control instruments to process lines, equipment’s and on control valves • Checking for Errors by running validation 6. DRILLING & COMPLETION/PETROLEUM TECHNOLOGY: Petroleum, Industrial, Chemical Personal, Geologist, NYSC, Graduates trainee COURSE MODULE • Introduction to Petroleum Industry • Introduction to Drilling Technology • Drilling Rigs & Rig equipment’s • Drilling Practices • Borehole instability & common drilling problems • Well site Geological survey • Drilling Fluids Technology • Directional drilling • Casing Technologies 7. GEOPHYSICAL /GEOTECHNICAL SURVEY TRAINING ----- Geologist, Hydro geologist, Water, NYSC, Geophysicist graduate/trainee CONTACT: GEOKEN TECH (08060360538/08028553955), kengeotech@yahoo.com Island Office: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway Mainland: Kazam Plaza, Suite 15, Opposite Domino Pizza, College Bustop, Ikotun- Lagos. |
| Jobs/Vacancies / Exploration, Drilling & Reservoir Simulation Training In Lagos by pipedraft: 4:55am On Aug 07, 2018 |
EXPLORATION, DRILLING & PRODUCTION COURSES/TRAINING GeokenTech: offer courses in the area of drilling, completion, Exploration and Reservoir Simulation/Engineering. Our expertise covers all sections of the oil & gas Industry, Exploration and Production, Safety, Reservoir simulation. COURSE 1: DRILLING, COMPLETION & PRODUCTION TECHNOLOGY MODULES (WELL DESIGN) Week 1 • Introduction to Petroleum Industry • Introduction to Drilling Technology • Drilling Rigs &Rig Equipment’s • Drilling Engineering, Geology & Reservoir • Drilling bits classification & Technologies • Drilling Practices & operation • Drilling Problems, practices & Operations • Casing Design Week 2 DRILLING FLUID TECHNOLOGY, WELL COMPLETION & PRODUCTION • Drilling Fluids & Well control • Drilling Fluids & Cement Technologies, Practices • Well completion Engineering • Well testing, Drill stem test • Wire line logging Target Audience: Petroleum, Chemical, Mechanical Engineering personal, Geologists, Young engineers involved in drilling and completion, tool pusher, Supervisor, NYSC Members. Course Fee: #50,000.00 COURSE 2: RESERVOIR ENGINEERING & PETROPHYSICS Week 1 • Introduction to Reservoir Engineering • Reservoir characterization from seismic to production & Logging Interpretation • Reservoir management • Reservoir fluids properties • Reservoir for Petroleum Engineers/Geologists Week 2 • Basic Geophysics • Seismic acquisition and data processing • 2D/3D Seismic Interpretation • Introduction to Petrel ( Basics) • Fundamentals of Petro physics • Rock Mechanics • Wire line log Interpretation • Wire line formation testing and Interpretation Target Audience: Petroleum Engineers, graduates, Geologists, Geophysicists Personal, Exploration trainee, NYSC Members, Applicants willing to work in oil & gas/Exploration firms. Trainee Fee: # 50,000.00 For more inquiry call: Geoken Tech (08060360538, 08028553955) Email: kengeotech@yahoo.com Office: Suite 59, Sebuff Plaza, Jakande roundabout Bustop, Lekki Expressway, Lagos. Mainland office: suit 15, kazam plaza, Ikotun. 1 Like |
| Jobs/Vacancies / Drilling, Exploration & Reservoir Simulation Training In Lagos by pipedraft: 6:05pm On Jul 25, 2018 |
EXPLORATION, DRILLING & PRODUCTION COURSES/TRAINING GeokenTech: offer courses in the area of drilling, completion, Exploration and Reservoir Simulation/Engineering. Our expertise covers all sections of the oil & gas Industry, Exploration and Production, Safety, Reservoir simulation. COURSE 1: DRILLING, COMPLETION & PRODUCTION TECHNOLOGY MODULES (WELL DESIGN) Week 1 • Introduction to Petroleum Industry • Introduction to Drilling Technology • Drilling Rigs &Rig Equipment’s • Drilling Engineering, Geology & Reservoir • Drilling bits classification & Technologies • Drilling Practices & operation • Drilling Problems, practices & Operations • Casing Design Week 2 DRILLING FLUID TECHNOLOGY, WELL COMPLETION & PRODUCTION • Drilling Fluids & Well control • Drilling Fluids & Cement Technologies, Practices • Well completion Engineering • Well testing, Drill stem test • Wire line logging Target Audience: Petroleum, Chemical, Mechanical Engineering personal, Geologists, Young engineers involved in drilling and completion, tool pusher, Supervisor, NYSC Members. Course Fee: #50,000.00 COURSE 2: RESERVOIR ENGINEERING & PETROPHYSICS Week 1 • Introduction to Reservoir Engineering • Reservoir characterization from seismic to production & Logging Interpretation • Reservoir management • Reservoir fluids properties • Reservoir for Petroleum Engineers/Geologists Week 2 • Basic Geophysics • Seismic acquisition and data processing • 2D/3D Seismic Interpretation • Introduction to Petrel ( Basics) • Fundamentals of Petro physics • Rock Mechanics • Wire line log Interpretation • Wire line formation testing and Interpretation Target Audience: Petroleum Engineers, graduates, Geologists, Geophysicists Personal, Exploration trainee, NYSC Members, Applicants willing to work in oil & gas/Exploration firms. Trainee Fee: # 50,000.00 For more inquiry call: Geoken Tech (08060360538, 08028553955) Email: kengeotech@yahoo.com Office: Suite 59, Sebuff Plaza, Jakande roundabout Bustop, Lekki Expressway, Lagos. Mainland office: suit 15, kazam plaza, Ikotun. |
| Jobs/Vacancies / Training Courses For Jobseekers & Professionals In Lagos by pipedraft: 11:46pm On Jul 22, 2018 |
GEOKEN TECH SERVICES TRAINING COURSES Geoken Tech Services Nig Limited: is a incorporated company, that is into training of relevant oil/gas, Engineering design software’s, listed below are courses offer by Geoken Tech Services Nig Ltd. COURSES TARGET AUDIENCE 1. AUTOCAD (2D/3D)-Engineering design/drafting -----Mechanical, Civil, Electrical. Engineering, NYSC, Graduates trainee, Chemical engineers AUTOCAD MODULE • Introduction to AutoCAD 2d Toolbar/Understanding AutoCAD Interface • Application of Tools bar( draw, modify, object snap, Properties, Status, Command) • Setting AutoCAD drawing Limits • Using AutoCAD tools to draw circles, Polygon, Eclipse, Rectangle etc • Modifying AutoCAD outline( using Trim, Extend, copy, move, break etc) • Introduction to Isometric drawing • Drawing, dimensioning and editing Isometric drawing • Introduction to AUTOCAD 3D • AutoCAD 3D Tools( Solid Editing, View, Modeling, View Style) • Creating solid object with AutoCAD 3d tools • Using the Extrude, Sweep, Revolve, Loft, 3D Rotate tools • Rendering of Solid objects 2. PIPING DESIGN (PLANT DESIGN MANAGEMENT SYSTEM)PDMS------Mechanical, Process, NYSC Chemical, Civil, Industrial PDMS MODULE • Introduction to Piping design & Specification • PDMS (Plant design management system) basics Introduction to Plant equipment’s type • Application of PDMS in Equipment design (Vessels, Pumps, Tanks, Reboiler, • Fractionating columns. • Taking coordinate/Equipment position from plant plan drawing (GAD) • Using the Primitive method to design equipment’s • Modification/ sizing of Primitives (Cylinder, Nozzles, Manhole) • Application of PDMS in piping components design/Fittings (Elbows, Tee, Flange, • Gasket) etc • Piping Isometric • • Develop equipment modeling, pipe modeling, structure modeling Piping Setting • Pipe specification in PDMS • Pipe Routing (Linking equipment’s with pipes) • Modifying the Head/Tail of a Pipe • Supporting Plant with Structures (Beams, Columns, Slab) 3. PETREL (SEISMIC INTERPRETATION, WELL LOGGING & RESERVOIR ESTIMATION)- Geologist, Petroleum, Reservoir Personal, Geophysicists, Trainee, NYSC Members MODULE Basic theory of seismic reflection prospecting method in oil and gas. Petrel Introduction & Interface •Different types of well logs and their uses. •Loading of 3D seismic reflection data, making Surfaces & Horizon Seismic Visualization & QC •Picking of faults (Importing fault data/Fault modeling) •Loading of well logs Importing well heads, well deviation & well tops •Seismic-to-well tie using synthetic seismogram •Mapping of reservoirs tops and base • Generation of depth structures map using check shot data. •Calculation of petro physical parameters •Generation of various attributes maps • Volumetric •Identification of prospects. PROCESS DESIGN & OPTIMIZATION ( HYSYS)-------------------------Chemical/Process/Industrial Personal NYSC Menbers, Graduate trainee HYSYS COURSE MODULE •Introduction to Aspen Hysys •Hysys working Environment •Adding component to workflow •Adding Fluid package •Entering Hysys Simulation Environment •Adding material and Energy stream •Building Simulation •Analyze the Property Using case Study •Modeling Unit Operator (Pumps, Compressor, Expander, Heat Exchanger, Flash Separators) •Equilibrium Reaction •Working on Hysys Project 5. PIPING & INSTRUMENTATION DESIGN (P&ID) --------Mechanical, Chemical Electrical Engineering Graduates trainee, NYSC Members COURSE MODULE • Introduction to P&ID workspace • P&ID Tools Palette • Creating a New P&ID Project • Inserting equipment’s (Vessels, Tanks, Heat Exchanger, Columns, Pumps) into P&ID Work space • Connecting equipment’s together with Process line • Assigning Tags to equipment’s and Specification to process lines • Placing control instruments to process lines, equipment’s and on control valves • Checking for Errors by running validation 6. DRILLING & COMPLETION/PETROLEUM TECHNOLOGY: Petroleum, Industrial, Chemical Personal, Geologist, NYSC, Graduates trainee COURSE MODULE • Introduction to Petroleum Industry • Introduction to Drilling Technology • Drilling Rigs & Rig equipment’s • Drilling Practices • Borehole instability & common drilling problems • Well site Geological survey • Drilling Fluids Technology • Directional drilling • Casing Technologies 7. GEOPHYSICAL /GEOTECHNICAL SURVEY TRAINING ----- Geologist, Hydro geologist, Water, NYSC, Geophysicist graduate/trainee CONTACT: GEOKEN TECH (08060360538/08028553955), kengeotech@yahoo.com Island Office: Sebuff Plaza, Suite 59, Jakande Roundabout, Lekki Expressway Mainland: Kazam Plaza, Suite 15, Opposite Domino Pizza, College Bustop, Ikotun- Lagos.
|
| Jobs/Vacancies / Geotechnical/geophysical Investigation Training In Lagos by pipedraft: 6:05pm On Jul 18, 2018 |
GEOTECHNICAL/GEOPHYSICAL INVESTIGATION TRAINING Geoken Tech: is into in geotechnical study, Drilling, material and soil Investigation, Piling and Foundation Engineering. We undergo training for participant seekingin-depth knowledge in the following Geotechnical/Geophysical areas: 1. Geotechnics: (Soil Testing/investigation)- Using the following soil test procedure as a case Study. A. Sieve Analysis B. CPT (Cone penetration Test), SPT (Standard penetration test) C. Triaxial testing D. Bearing Capacity Test. E. Borehole drilling and Geophysical survey. F. Application of Geophysical & Geotechnical software for data processing 2. Foundation Engineering: A. Pile integration testing and Pile construction B. Pile load test WHO TO ATTEND: Geologist, geophysicist, Civil, Petroleum/reservoir Engineer, NYSC, and Students,Geotechnical survey Engineers, Hydrographers, Surveyors, IT students Office/Training centre: Sebuff Plaza, Suite 59, Jakande roundabout, Lekki Expressway, Lagos Contact: 26, Ikotun Road, Beside Diamond Bank, Suite, 15, Kazam Plaza, College Bustop, Ikotun, Lagos. |
| Certification And Training Adverts / Geotechnical/geophysical Investigation Training In Lagos by pipedraft: 5:59pm On Jul 16, 2018 |
GEOTECHNICAL/GEOPHYSICAL INVESTIGATION TRAINING Geoken Tech:, is into in geotechnical study, Drilling, material and soil Investigation, Piling and Foundation Engineering. We undergo training for participant seeking in-depth knowledge in the following Geotechnical/Geophysical areas: 1. Geotechnics: (Soil Testing/investigation)- Using the following soil test procedure as a case Study. A. Sieve Analysis B. CPT (Cone penetration Test), SPT (Standard penetration test) C. Triaxial testing D. Bearing Capacity Test. E. Borehole drilling and Geophysical survey. F. Application of Geophysical & Geotechnical software for data processing 2. Foundation Engineering: A. Pile integration testing and Pile construction B. Pile load test WHO TO ATTEND: Geologist, geophysicist, Civil, Petroleum/reservoir Engineer, NYSC, and Students, Geotechnical survey Engineers, Hydrographers, Surveyors, IT students Office/Training centre: Sebuff Plaza, Suite 59, Jakande roundabout, 08060360538/08028553955 email: kengeotech@yahoo.com |
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (of 18 pages)
(Go Up)
| Sections: politics (1) business autos (1) jobs (1) career education (1) romance computers phones travel sports fashion health religion celebs tv-movies music-radio literature webmasters programming techmarket Links: (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) Nairaland - Copyright © 2005 - 2024 Oluwaseun Osewa. All rights reserved. See How To Advertise. 52 |