₦airaland Forum

Adoga2020:
I have same problem with my Toyota Camry 2005 model. With 10 pin gearbox. It started gradually with little delay when you engage the gear in the morning. It takes time to response but the reverse is OK. My mechanic thought it was from the gearbox, he did total service (including change of ATF, brainbox services and valves and even changed the drive component of the gear) still the problem persist).
At a time when it was worst and the car refused to move forward totally, I noticed the mechanic simply disconnected the brainbox and drove it manually without the usually delays.
Please what's the solution to this problem I am new to Toyota, I use Honda before.
NB: the gear selects fine with it picks after the morning delays.
Help a brother, before I spend wastefully

Please how did you solve this problem

The information here has really been useful, please I need help... Because I can be very skeptical when it comes to mechanic as I really do study about cars too on my own.
So I have a RX330 and upon raising the engine it brings out smoke whitish blueish somehow. But then my engine doesn't burn oil at all and the water level is perfect, many people said the engine is perfect after driving that is just from the bad oil they have been using for it and since I bought the recommended oil, that is why the change. Please what can be the cause and I want to fix some things soon on the car like the wheel sensor. I am in ikorodu so please if you have a genuine mechanic I won't mind, thanks

carbon1224:
Do you have a good Kazeem that can rebuild engine around ikorodu

Please did you get one?

The information here has really been useful, please I need help... Because I can be very skeptical when it comes to mechanic as I really do study about cars too on my own.
So I have a RX330 and upon raising the engine it brings out smoke whitish blueish somehow. But then my engine doesn't burn oil at all and the water level is perfect, many people said the engine is perfect after driving that is just from the bad oil they have been using for it and since I bought the recommended oil, that is why the change. Please what can be the cause and I want to fix some things soon on the car like the wheel sensor. I am in ikorodu so please if you have a genuine mechanic I won't mind, thanks

Please add me up, I just finished mine for 1 pm , we can only pray and hope for the best.
08088460367

Hello house,I have been having a serious issue with 2010 toyota camry , v6 , 22 pin gearbox for the past two months now and I need help and advise. I was traveling and on my way I discovered my engine was revving but my accelarator was stalk on 60, so I stopped, off the car and put it back on but it didn't engage in drive or reverse so I had to roll the car,the gearbox mechanic said my oil pump , filter and torque converter was bad so we changed all of it and put WS oil. It worked but it was in one gear, so we got another TCM gearbox brain box and then it selected but right now whenever am entering gear 2 at Lowes speed , the car jerks and when am deaccelerating, it jerks when its about to come to gear 2 , also it like it using power to pick up when in drive. Another gearbox mechanic said we have to change valve body because in addition to the previous problem when the car is parked over night , it won't reverse or it sluggish when entering reverse , he said its the valve body that is making it jerk when entering gear 2 and also making it not entered reverse. I have spent close to 200k fixing this gearbox, I know realize I would have been patient, save up and buy a new gearbox but right now am totally broke, the last money I have is what am about to give him to change the valve body because he said using a bad valve body can lead to burning the fibre. Please anybody out there with similar problem using 22 pin gearbox to please advise me.
Thanks

Hello house,I have been having a serious issue with 2010 toyota camry , v6 , 22 pin gearbox for the past two months now and I need help and advise. I was traveling and on my way I discovered my engine was revving but my accelarator was stalk on 60, so I stopped, off the car and put it back on but it didn't engage in drive or reverse so I had to roll the car,the gearbox mechanic said my oil pump , filter and torque converter was bad so we changed all of it and put WS oil. It worked but it was in one gear, so we got another TCM gearbox brain box and then it selected but right now whenever am entering gear 2 at Lowes speed , the car jerks and when am deaccelerating, it jerks when its about to come to gear 2 , also it like it using power to pick up when in drive. Another gearbox mechanic said we have to change valve body because in addition to the previous problem when the car is parked over night , it won't reverse or it sluggish when entering reverse , he said its the valve body that is making it jerk when entering gear 2 and also making it not entered reverse. I have spent close to 200k fixing this gearbox, I know realize I would have been patient, save up and buy a new gearbox but right now am totally broke, the last money I have is what am about to give him to change the valve body because he said using a bad valve body can lead to burning the fibre. Please anybody out there with similar problem using 22 pin gearbox to please advise me.
Thanks

Hello house,I have been having a serious issue with 2010 toyota camry , v6 , 22 pin gearbox for the past two months now and I need help and advise. I was traveling and on my way I discovered my engine was revving but my accelarator was stalk on 60, so I stopped, off the car and put it back on but it didn't engage in drive or reverse so I had to roll the car,the gearbox mechanic said my oil pump , filter and torque converter was bad so we changed all of it and put WS oil. It worked but it was in one gear, so we got another TCM gearbox brain box and then it selected but right now whenever am entering gear 2 at Lowes speed , the car jerks and when am deaccelerating, it jerks when its about to come to gear 2 , also it like it using power to pick up when in drive. Another gearbox mechanic said we have to change valve body because in addition to the previous problem when the car is parked over night , it won't reverse or it sluggish when entering reverse , he said its the valve body that is making it jerk when entering gear 2 and also making it not entered reverse. I have spent close to 200k fixing this gearbox, I know realize I would have been patient, save up and buy a new gearbox but right now am totally broke, the last money I have is what am about to give him to change the valve body because he said using a bad valve body can lead to burning the fibre. Please anybody out there with similar problem using 22 pin gearbox to please advise me.
Thanks

How many hours did u charge it b4 use?? Nd did u use gen or nepa lite??

BUT IT HAS NO HOTSPOT ND WE DONT KNW IF IT CAN MAKE CALLS YET