₦airaland Forum

thonyman:
Dear Gazzuzz,
I changed my car water pump recently to solve draining coolant issues, but my check engine light came on after the repair with P0018 code:
P0018
Crankshaft position
Camshaft Position
Correlation Bank 2
Sensor A
Engine works normal and still start at first attempt, kindly advice on what should be done.

GAZZUZZ:
Timing not set properly.

Possibly a V engine .

Reinstall the timing belt again

GAZZUZZ:
Replace Mechanic

Kassiny:
Dear Gazzuzz.

Which of the tire size will give me a better height and ground clearance for camry 2008

215/70/16
215/60R17

GAZZUZZ:

https://tiresize.com/comparison/

komodapson:
Please can I top up Oil of my Camry 2005 with Hard ex Gold SAE 5W-30 (fully synthetic) before making a complete Oil change which is will be in 3rd week of July. The initial oil that was used (in
month of may) that gets burnt easily is Mobil 5w-20.

komodapson:
Please can I top up Oil of my Camry 2005 with Hard ex Gold SAE 5W-30 (fully synthetic) before making a complete Oil change which is will be in 3rd week of July. The initial oil that was used (in
month of may) that gets burnt easily is Mobil 5w-20.

demborise:
i want to buy jack for toyota highlander which one is good between this two

samuelson06:
Good morning everyone, I recently got a leaked tank in my Ford Focus so I took the car to a mechanic. The mechanic dropped the tank while a welder closed the hole. After everything, I realized the welder had caused the anti-siphon device to melt since it's made of a plastic material. He couldn't remove it before the work.

So right now, I'm not using the device again. But the problem now is that my dashboard is showing the Check Engine Light which came after the repairs. I think this is as a result of the anti-siphon that was removed because the light wasn't there before the repairs.

Now, my question is, apart from the anti-siphon stopping people from taking fuel from my tank, is there something else that it does that may be triggering the engine warning light?

BTW, I've been driving the car with the light for days now and I don't really know how it may impact it in the near future.

demborise:
i want to buy jack for toyota highlander which one is good between this two

GAZZUZZ:
Scan the car.
anti-siphon has nothing to do with any of the vehicle codes

demborise:
i want to buy jack for toyota highlander which one is good between this two

eagleeye2:
Hello Gurus in the house.
I recently changed my engine. The oil used when they did the change was 20w50 Mobil. A week after I changed it to Mobil1 (5w20). I traveled immediately after the oil change leaving the car at home.
As I came back, I checked the oil level it was ok. Though it has turned blackish. The drives well, but I noticed that the overheating problem hasn't been corrected. I have scanned it before and equally scanned it again today. It keeps throwing the same codes.
P1150
P1130
P0171
NB
My mechanic asked me to change the radiator to correct the overheating problem.
Please I need advice on how to move forward.
Car: Toyota Avalon 2000

Jamal64:
Will you advise I raise this car?

GAZZUZZ:
No

okwypascal:
Please what's the name of this app you used

Jamal64:
Okay but isn’t it looking very low compared to other C300 of the same class?

Or what do you feel can be done? Cos I don’t know it seems lower than every other c300 I might have seen

Jamal64:
Okay but isn’t it looking very low compared to other C300 of the same class?

Or what do you feel can be done? Cos I don’t know it seems lower than every other c300 I might have seen

GAZZUZZ:
Front tyre is 225/45R/17
Back tyre is 245/ 40R/17 compare tyre sizes on the drivers door, with sizes on the actual tyres

Kale001:
My Toyota camry drop light is showing oil indication on the dashboard and when I checked, all the oil required are in right proportion. Pls what should I do? Assist a novice car owner

GAZZUZZ:
Replace mechanic

eagleeye2:
What app?