michlins:
In the spirit of openess, these doors are sold for 35,000 pere


Good morning everyone

good price

rotecch77:


The drawing looks ok,
No perfect drawing anywhere.
I will only suggest that you can inter change the dressing room to toilet, so that the plumbing piping system will be simple and lesser in cost because of the distance to the second room toilet.
( upper floor )

Thanks

I think the dressing room is to serve both rooms, so if moved to the other side, may likely not serve the master bed optimally.

MRFIXER001:
I'm impressed

KelvinCoaster:

This is massively apt...
The sky can't be your limit!

Thanks.
I’ve made 3 or more people from here tow the same path.

Chateau in Ilè Oluji 2013| We did electrification (6 poles ), 5.4m box culvert and earthwork of 1km community road

Oluyole Grandeur 2019 | We did rural electrification (10 poles, solar streetlights), 6m box culvert and earthwork of 1km community road.

I believe people are what makes cities great. Better societies are built from the heart and not from our complaints.

somehow:
Please house, help review this plan.

Thanks in advance.





Don't blink...

The laundry and the kitchen having a strong relationship isn't right to me, can you move dirty clothes and probably kids messed up napkins through your kitchen to the laundry?
Assuming you want to achieve a proper laundry then it should have a verandah attached to it, where you can hang some clothes to dry up during rainfalls.

The inclined wall just created a little unusable space, you can straighten the wall.

Finally, coordinate your dimensions. I just saw 939mm for door opening, 3664mm for bedroom, there ain't right.

Above all the plan works well.

Daalu.

Thenext:
Good afternoon my good people of nairaland, please help me review the attached quotation for electrical work for 4 bedroom duplex all en-suite. Is the quantity and price okay please

Why can't your electrician do it this way to save you some money

1.5mm single core cable
Red 7
Black 7
Green 4

2.5mm single core cable
Red 5
Black 5
1.5mm green 5

4mm single cable
Red 4
Black 4
2.5mm green 4

Also , why having 3red for the 10mm,

This is a 4 bedroom duplex and besides how many distribution board do you have ?

To me 10mm should be
Red 2
Black 1

Also, be very careful, so that you won't buy re-brand or re-coil cable

UC92:


The laundry and the kitchen having a strong relationship isn't right to me, can you move dirty clothes and probably kids messed up napkins through your kitchen to the laundry?
Assuming you want to achieve a proper laundry then it should have a verandah attached to it, where you can hang some clothes to dry up during rainfalls.

The inclined wall just created a little unusable space, you can straighten the wall.

Finally, coordinate your dimensions. I just saw 939mm for door opening, 3664mm for bedroom, there ain't right.

Above all the plan works well.

Daalu.

Ok sir.

Will communicate this to the arch.

Thank you.

dongc:


Not really sir..i get what you are trying to say but..people are using stone coated roofing....people are paying high price for wichtech while there are so many cheaper ones.....some are using best/tower aluminum....people are using unknown company in Mushin. people are using dulux while people here will buy from oga gbadexy ...this is my point...

Dulux and Oga Gabdexy quality and price are head-to-head..

n3xt:
Urgent Request

I need some quantities of South African Brick Tiles supplied to me this morning

Offer: 6500 - 7000 per sqm
Location: Lagos Mainland

Regards.

Think it's around 8500 - 9000

AdekunleIG:
For your Quality Polyurethane Waterproof Skirting Board @ affordable price.
Nationwide Delivery.
Call/Whatsapp: 08137301710

How much per metre do you sell your own.?

Contact RSL resources for all types of
Granites, directly from akamkpa and at a cheaper rate..
And we also give out LPO to interested persons..

We also deal on all types of
Wall panels
Wallpapers
Pe foam
Pop ceiling
Cornice
Artificial Grass
Call or Whatsapp 0905445833
Thanks

Dangote 4,400.00
Bua 4,500.00

They say it is a yearly ritual that around this time the price of cement jumps by 100 to 200 Naira every other day till the year ends

Let's hope it returns to pre-holiday rates soon

Good morning everyone,

I am new here and this is my first post on this section.

Please who know or have an idea of what it cost to get a registered survey on a land in Benin City and what the processes involved?

Thanks.

Shuggaa:
Contact RSL resources for all types of
Granites, directly from akamkpa and at a cheaper rate..
And we also give out LPO to interested persons..

We also deal on all types of
Wall panels
Wallpapers
Pe foam
Pop ceiling
Cornice
Artificial Grass
Call or Whatsapp 0905445833
Thanks

How much is your 3D per sqm?

For your
Pop
Wall screeding
Pre cast paraphet
Tv walls

Speak to us

https://www.nairaland.com/6564561/pop-design-tv-wall-installation

Perfecttouchade:
Perfect Touch Aluminium

https://www.nairaland.com/5672837/fabrication-quality-aluminium-windowsrailingsdoors-made/65

compliment of the season to everyone

FEGEITOK:
Dangote 4,400.00
Bua 4,500.00

They say it is a yearly ritual that around this time the price of cement jumps by 100 to 200 Naira every other day till the year ends

Let's hope it returns to pre-holiday rates soon

bought dangote 4200 some days ago in Lagos

Please house, i am taking down my comments on bio digester, the man is begging and my heart is to soft.

FEGEITOK:
Dangote 4,400.00
Bua 4,500.00

They say it is a yearly ritual that around this time the price of cement jumps by 100 to 200 Naira every other day till the year ends

Let's hope it returns to pre-holiday rates soon

That much ? Maybe your location

Should be 4000/4100 in most places

rmx:


That much ? Maybe your location

Should be 4000/4100 in most places

Good question. Will make more inquiries. Vendor said the distributor doesn't always honor the price given ahead of time, the price when it arrives is usually higher and they have to pass on the cost.

Will ask around for comparison’s sake

These prices are for the FCT

Jeff68:
Please house, I bring this matter to this forum because I engaged this person on here, I am totally lost for words and seriously disappointed with work done by [b][/b]Alphamale Bio Digester. Apparently, he copies work done by others online and post it as his work! because this is what he did at my site! Photo & video attached, nothing close to what he posted on his Facebook page! I honestly expected what I saw online. unfortunately, that was not the case. I engaged him to do 2 of these, and from the start I had concerns, he kept saying “everything will be well, he has been doing this for 3 years”., he is not new at this” but when I got to the site yesterday, this was what I saw, I was so disgusted I can hardly stand, the other artisans on site were dying laughing at my reaction because they told him.
Now to the facts, I have already paid 200k for 2 out of the 350k I was billed for 2. This was suppose to be casted, he used blocks, dug a hole and buried blocks to absorb the water, I told him I had doubts about that working, he said he will add some chemicals, he added some coconut shell! I am still owing 100k, but based on what I have seen on ground, I will have to start all over again. Honestly, the level of unprofessionalism is shocking for what he expects me to pay 350k for. There is more, but I am so pissed off! Please your opinion because he actually thinks he did a good job!

What is this? You should ask for a refund damn.

This stuff that look like burial ground….

Jeff68:
Please house, I bring this matter to this forum because I engaged this person on here, I am totally lost for words and seriously disappointed with work done by [b][/b]Alphamale Bio Digester. Apparently, he copies work done by others online and post it as his work! because this is what he did at my site! Photo & video attached, nothing close to what he posted on his Facebook page! I honestly expected what I saw online. unfortunately, that was not the case. I engaged him to do 2 of these, and from the start I had concerns, he kept saying “everything will be well, he has been doing this for 3 years”., he is not new at this” but when I got to the site yesterday, this was what I saw, I was so disgusted I can hardly stand, the other artisans on site were dying laughing at my reaction because they told him.
Now to the facts, I have already paid 200k for 2 out of the 350k I was billed for 2. This was suppose to be casted, he used blocks, dug a hole and buried blocks to absorb the water, I told him I had doubts about that working, he said he will add some chemicals, he added some coconut shell! I am still owing 100k, but based on what I have seen on ground, I will have to start all over again. Honestly, the level of unprofessionalism is shocking for what he expects me to pay 350k for. There is more, but I am so pissed off! Please your opinion because he actually thinks he did a good job!

I still don't know why people still give out jobs because of pictures so-called artisans copy and paste on line. Some people are only good at posting beautiful pictures but when you give them jobs then 'sorry' will be your name. The real professionals do more work than they stay on line. I can go about taking pictures of beautiful houses, septic tanks, doors, windows, gates, roofing sheets and so on, after that I post them here, beat my chest and brag my head out.

It is Very easy to become an engineer 'overnight' in this platform.

Please let's be smart it is a modern day.

Dang.

The pictures and long epistle gang have struck again.

This is terrible, it has to be redone, but not by the same person.

Jeff68:
Please house, I bring this matter to this forum because I engaged this person on here, I am totally lost for words and seriously disappointed with work done by [b][/b]Alphamale Bio Digester. Apparently, he copies work done by others online and post it as his work! because this is what he did at my site! Photo & video attached, nothing close to what he posted on his Facebook page! I honestly expected what I saw online. unfortunately, that was not the case. I engaged him to do 2 of these, and from the start I had concerns, he kept saying “everything will be well, he has been doing this for 3 years”., he is not new at this” but when I got to the site yesterday, this was what I saw, I was so disgusted I can hardly stand, the other artisans on site were dying laughing at my reaction because they told him.
Now to the facts, I have already paid 200k for 2 out of the 350k I was billed for 2. This was suppose to be casted, he used blocks, dug a hole and buried blocks to absorb the water, I told him I had doubts about that working, he said he will add some chemicals, he added some coconut shell! I am still owing 100k, but based on what I have seen on ground, I will have to start all over again. Honestly, the level of unprofessionalism is shocking for what he expects me to pay 350k for. There is more, but I am so pissed off! Please your opinion because he actually thinks he did a good job!

Godisgreatest1:


I still don't know why people still give out jobs because of pictures so-called artisans copy and paste on line. Some people are only good at posting beautiful pictures but when you give them jobs then 'sorry' will be your name. The real professionals do more work than they stay on line. I can go about taking pictures of beautiful houses, septic tanks, doors, windows, gates, roofing sheets and so on, after that I post them here, beat my chest and brag my head out.

It is Very easy to become an engineer 'overnight' in this platform.

Please let's be smart it is a modern day.

You are right, but not everyone copy and paste pictures of work,may we not fall victim to wrong person

Godisgreatest1:


I still don't know why people still give out jobs because of pictures so-called artisans copy and paste on line. Some people are only good at posting beautiful pictures but when you give them jobs then 'sorry' will be your name. The real professionals do more work than they stay on line. I can go about taking pictures of beautiful houses, septic tanks, doors, windows, gates, roofing sheets and so on, after that I post them here, beat my chest and brag my head out.

It is Very easy to become an engineer 'overnight' in this platform.

Please let's be smart it is a modern day.

Very true

Real builders don't have the time for long epistle and posting multiple pictures.

FEGEITOK:


Seeing these pictures unleashed my creative juices

So I started thinking, what can be achieved with bamboo which is readily available locally and found these.

Hope these inspires others as much the pictures you have shared have inspired me to do more with wood

U can achieve alot of designs with bamboo, I will soon be posting a bamboo fence design in lekki here, the only thing is to get the right bamboo, treat them, polish and seal them so they will look the same . Call or WhatsApp me on 09036346989

naijacreativeha:

U can achieve alot of designs with bamboo, I will soon be posting a bamboo fence design in lekki here, the only thing is to get the right bamboo, treat them, polish and seal them so they will look the same . Call or WhatsApp me on 09036346989

So sweet of you.

I have been following your works.

Top notch

KolaShangOne:


Think it's around 8500 - 9000

I got 8,000 yesterday at Orile but I need to visit to confirm it’s what I want or chose something else.

@somehow, I recall u were going to engage him? Yes, I plan to redo and definitely not by the same person!

Yes but changed my mind later on.

Jeff68:


@somehow, I recall u were going to engage him? Yes, I plan to redo and definitely not by the same person!

topsy23:


If you are in East cutix is okay . 2.5mm cable for AC? IEE standard says 4mm. Below are the recommended cable sizes for appliance by IEE regulation

1.5mm is lighting lighting
2.5mm is for socket
4mm is for AC and water heater
6mm is for cooker

Please what brand would you recommend for the FCT?