Let's do this simple and contemporary design for your house

Please Engineers help me review this quote for a day casting job I think the cost is high and may not require all this number of people

Machine - 25000, Uppers 6 People - 30000 , Granite and sand 6 people - 22500 , Water and cement - 5000 , Bonker 2 People - 11000 , 1 bricklayer - 6000 , Shovel and headpan - 5000 TOTAL - 104500

hamtabfawaz:


● The damage should be properly assesed from inside the Pop ceiling through the man hole.
If the Fillas that was used to hold the ^area of damage^ is broken, the damaged area should be slightly cut out and replaced with another fillas (if extent of damage is large, a casted board should be used too) to strengthen that area again, and a final dressing on the outside, if the fillas on the inside is not affected, then Dressing/screeding (Topbond & screeding paint involved) would do.

He fell from the inside.. I have contacted my pop guy, he said he will go and check it out to know the extent of the damage and see what will be done... Thanks so much for your assistance...

redgem:


He fell from the inside.. I have contacted my pop guy, he said he will go and check it out to know the extent of the damage and see what will be done... Thanks so much for your assistance...

You're welcome Ma'am.

michlins:
Let's do this simple and contemporary design for your house

Good Morning bro.
Design wey Make sense.

dominic17:
Please Engineers help me review this quote for a day casting job I think the cost is high and may not require all this number of people

Machine - 25000, Uppers 6 People - 30000 , Granite and sand 6 people - 22500 , Water and cement - 5000 , Bonker 2 People - 11000 , 1 bricklayer - 6000 , Shovel and headpan - 5000 TOTAL - 104500

Since you already knew that the cost is high, why asking for review?

Would you accept any review that says that the cost is low or moderate?

hamtabfawaz:




You're welcome Ma'am.

I want to use 3watts spotlight for pop in the parlor but electrician is saying it won't be good cos it will be looking like a hotel 🙄🙄🙄that I should use 6watts instead.. Total pop lighting points in the parlor is 24 and 6 wall brackets... Please what is your opinion on this?

We are still available for ur order, quality art work design, window hood, pillars and parapet design.09058432795.

Gud morning here,

redgem:


I want to use 3watts spotlight for pop in the parlor but electrician is saying it won't be good cos it will be looking like a hotel 🙄🙄🙄that I should use 6watts instead.. Total pop lighting points in the parlor is 24 and 6 wall brackets... Please what is your opinion on this?

You have free electricity? Why so much light

redgem:


I want to use 3watts spotlight for pop in the parlor but electrician is saying it won't be good cos it will be looking like a hotel 🙄🙄🙄that I should use 6watts instead.. Total pop lighting points in the parlor is 24 and 6 wall brackets... Please what is your opinion on this?

Wow, madam. Do you consider the cost of generator, inverter KVA that will run total consumption of your energy per day, even PHCN? Please leave these discussions for professionals, they have the knowledge and standards they use to determine how a size of room should be bright. No vex ooo, how many bulbs do you intend to use for the entire building? Let even try little math of energy consumption. Let say you have generators of 15 KVa running on 3liters per hour at the rate of diesel 250x 3 = 750 per hour x 8 hours daily = 6k per day. This is not 24 hours. My opinion sha ooo. This just on conservative estimates

redgem:


I want to use 3watts spotlight for pop in the parlor but electrician is saying it won't be good cos it will be looking like a hotel 🙄🙄🙄that I should use 6watts instead.. Total pop lighting points in the parlor is 24 and 6 wall brackets... Please what is your opinion on this?

Why so many lights for only the living room...or did you mean the entire building?

Solar heater

Almost done

Awka
08035153923

dominic17:
Please Engineers help me review this quote for a day casting job I think the cost is high and may not require all this number of people

Machine - 25000, Uppers 6 People - 30000 , Granite and sand 6 people - 22500 , Water and cement - 5000 , Bonker 2 People - 11000 , 1 bricklayer - 6000 , Shovel and headpan - 5000 TOTAL - 104500

Is this for a slab (decking)?

twinskenny:


You have free electricity? Why so much light

The parlour is long (Parlour and dining together) as what the electrician said... So he had to put that much pop lights... Total pop lights in the house is 40... 8 wall brackets

kopell:
Wow, madam. Do you consider the cost of generator, inverter KVA that will run total consumption of your energy per day, even PHCN? Please leave these discussions for professionals, they have the knowledge and standards they use to determine how a size of room should be bright. No vex ooo, how many bulbs do you intend to use for the entire building? Let even try little math of energy consumption. Let say you have generators of 15 KVa running on 3liters per hour at the rate of diesel 250x 3 = 750 per hour x 8 hours daily = 6k per day. This is not 24 hours. My opinion sha ooo. This just on conservative estimates

I left it to a professional and he gave me so much lights... 3watts and 6watts which saves energy?

redgem:


I want to use 3watts spotlight for pop in the parlor but electrician is saying it won't be good cos it will be looking like a hotel 🙄🙄🙄that I should use 6watts instead.. Total pop lighting points in the parlor is 24 and 6 wall brackets... Please what is your opinion on this?

3 watts x 24 lighting points is just 72 watts
6 watts x 24 lighting points is 144 watts

How many square meters is your parlor?

Please take some time to view this video:
https://www.youtube.com/watch?v=ENc-0dufe_c&t=12s

Rany4all:
Why so many lights for only the living room...or did you mean the entire building?

Not the entire building oh....just parlour/dining

FEGEITOK:


3 watts x 24 lighting points is just 72 watts
6 watts x 24 lighting points is 144 watts

How many square meters is your parlor?

Please take some time to view this video:
https://www.youtube.com/watch?v=ENc-0dufe_c&t=12s

42sqm

redgem:


42sqm

Then you should be using 1.5 x 42 = 63 watts going by the extract of the article I posted above


See also
https://www.youtube.com/watch?v=T3KbEiMV6AE&t=7s

FEGEITOK:


Then you should be using 1.5 x 42 = 63 watts going by the extract of the article I posted above

So why then is he insisting I use 6watts spotlight?

redgem:



So why then is he insisting I use 6watts spotlight?

Ask him.

Your lighting plan is even closer to the recommended than

See also
https://www.youtube.com/watch?v=oA-uLPzMilU

FEGEITOK:


Ask him.

Your lighting plan is even closer to the recommended than his

I will insist on using 1.5 then... Thank you so much

What you want is a proper lighting simulation

Keep in mind the level of lighting for a home is not supposed to be above 50 lux. Lighting for an office is 400 to 500 lux

Also your home lighting is supposed to be warm white, not all those daylight or cool white of the office.

Most of these luminaire manufacturers have online lighting calculation tools

The maximum you are looking for is your home is 50 to 75 lux in rooms. In the kitchen you may want 300 to 400 lux. Maybe same in the study. Maybe same in garage. But you really don't want office levels of illumination in a home.

All this calling watts is a completely wrong way of calculating lighting levels. The unit of lighting is lux for UK candela for us

redgem:


I will insist on using 1.5 then... Thank you so much

All the best. I got these results from my YouTube history. When I wanted to do magic with lighting in my place

Lighting is both a science and an art.

Sadly here we only set up lighting for the purpose of lighting and not for setting mood and ambiance or for tasks.

So you need to learn a bit more to explore the range of what is possible with lighting design

redgem:


I left it to a professional and he gave me so much lights... 3watts and 6watts which saves energy?

Is he recommended 6 watts x numbers of points? That doesn’t make any sense to me then. If is 6 watts is should be have of those points then.

FEGEITOK:


All the best. I got these results from my YouTube history. When I wanted to do magic with lighting in my place

Lighting is both a science and an art.

Sadly here we only set up lighting for the purpose of lighting and not for setting mood and ambiance or for tasks.

So you need to learn a bit more to explore the range of what is possible with lighting design


https://www.youtube.com/watch?v=ENc-0dufe_c&t=12s

If you really want to mess with lighting design you can go for dialux or relux. They are both free lighting design apps. Most of the lighting industry has built modules that work with their software. It takes a little getting used to, but that is the way to go if you want to simulate lighting of your room

redgem:


The parlour is long (Parlour and dining together) as what the electrician said... So he had to put that much pop lights... Total pop lights in the house is 40... 8 wall brackets

These days people don’t do walk bracket any longer
To me it’s a waste of space and energy.

I believe there is rope lights, center light then pop lights.. that’s enough

If you get original pop lights you don’t need that much light honestly.

GloriousGbola:


If you really want to mess with lighting design you can go for dialux or relux. They are both free lighting design apps. Most of the lighting industry has built modules that work with their software. It takes a little getting used to, but that is the way to go if you want to simulate lighting of your room

thanks for sharing.

I almost even signed up for a lighting design course

But I had to backpedal because I wouldn't have time to complete it. But I have it in mind.

I am grateful to learn from you.

The major light manufacturers in the US have several videos on this on YouTube, one can watch and pick lessons even if he or she is not going to use their products

FEGEITOK:


thanks for sharing.

I almost even signed up for a lighting design course

But I had to backpedal because I wouldn't have time to complete it. But I have it in mind.

I am grateful to learn from you.

The major light manufacturers in the US have several videos on this on YouTube, one can watch and pick lessons even if he or she is not going to use their products

At your service sir

hamtabfawaz:


Good Morning bro.
Design wey Make sense.

yes oh

No, foundation wall two board

Akerewe:


Is this for a slab (decking)?