Meklex:
Oga Gazzuzz,

I scanned my car ES 330 and it says that my knock sensor, bank 1 and 2 is faulty (P0325 and P0330). I have changed upto 4 different sensors and it still brings out CEL after clearing it.

We have checked the harness and it's in good condition and we have actually used 2 different harnesses.

What could be the problem?

All the sensors were tokunbo and untested. How can I get original and tested sensors?

Could it be something else that's wrong?

GAZZUZZ:


Post a pic of what you have been changing let me solve the riddle .

somehow:
Please @GAZZUZZ, kindly help with the interpretation and possible solution to this error code :

"P2109 - Throttle / Pedal Position Sensor 'A' Minimum Stop Performance "

I got other error codes too but when I cleared code, only the above remained.

Thanks

GAZZUZZ:


Clean throttle body , remove battery terminals after that for 2mins .

somehow:


Thanks chief.

Another issue, my engine oil goes down too frequent, like within 4 months, I must topup.

I have checked for leakages and there's none.

What could be the issue?

uncleck:
Please guys, who can help me check this vin?

2T2GK31U47C003250
575

GAZZUZZ:


vehicle make and model

Engine size and type

Mileage

Engine oil previously used

Engine oil currently used

Interval of oil change

somehow:


Toyota Camry 2012 SE
4plug. I think 2.5
158k
Mobil 1
mobil 1000 (Changed to see if it was the leanest that was the cause.
oil is always fresh but often low.

I top up within 3 months , change oik bi-yearly.

Changed 3 times last year.
changed already this year.

GAZZUZZ:

GAZZUZZ:


Post a pic of what you have been changing let me solve the riddle .

Meklex:
that's the image

uncleck:
Please guys, who can help me check this vin?

2T2GK31U47C003250
575

Meklex:
that's the image

GAZZUZZ:


Very low quality mineral oil you are killing your engine .

Abbeyb1ack:
Please how do I remove this broken part of my fuel door for rx 330
So i can weld the door back
Can i remove it myself?

Abbeyb1ack:
Please how do I remove this broken part of my fuel door for rx 330
So i can weld the door back
Can i remove it myself?

somehow:


Okay. But i was using Mobil 1 0w20 and still experienced the same issue. Only changed to see the difference.

Or is Mobil 1 also low?

What do you suspect to be the issue?

I plan to upgrade back to synthetic once the solution is gotten.

Buying full synthetic and toping oil every 3 months is worrisome.

GAZZUZZ:


Tear down engine, replace piston rings and valve stem seals.

somehow:


Is this something you offer as a service?

GAZZUZZ:


Very low quality mineral oil you are killing your engine .

GAZZUZZ:


Your vehicle is a 2005? If I am correct you have the wrong engine currently installed .

The Es300 comes with a 3.0L 1mz engine and knock sensors like what you have in your hand.

The ES330 comes with a 3mz vvti engine and black plastic knock sensors like in the pic below.

I recommend you buy the right knock sensors and short knock sensor harness and send me a bottle of wine when you done and it's working fine.

PS find me number and contact me for parts of you cannot find

Meklex:
my car is actually es300 2002.

When we open the engine for the replacement, the picture of that knock sensor I uploaded was what we saw

Meklex:
Oga Gazzuzz,

I scanned my car ES 330 and it says that my knock sensor, bank 1 and 2 is faulty (P0325 and P0330). I have changed upto 4 different sensors and it still brings out CEL after clearing it.

We have checked the harness and it's in good condition and we have actually used 2 different harnesses.

What could be the problem?

All the sensors were tokunbo and untested. How can I get original and tested sensors?

Could it be something else that's wrong?

Meklex:
my car is actually es300 2002.

When we open the engine for the replacement, the picture of that knock sensor I uploaded was what we saw

kingreign:


You/your part seller and your kazeem no try.
Haba!


Una go dey buy wrong knock sensors.

kingreign:


You mean to tell us that you don’t know the car you’re driving or what?
What’s all these confusion and uncertainty for?

GAZZUZZ:


I will strongly recommend that you allow someone with the proper skill set to carry out this operation since you cannot understand how to unscrew and screw 2 10mm bolts.

Thefarmer3:


Let me guess, your speedometer also stopped working?

Check your speed sensors... Or ABS sensors

Better still, scan your vehicle

WycliffeSMB:
Pls is there any Genuine dealer here who has Mobil Super 2000 5w-30?

I need the 5litres